• 전기학회논문지P
• /
• 제58권3호
• /
• pp.297-302
• /
• 2009

In this paper, we propose advanced screen detector as a tool for selecting the object for tracking and estimating its distance from a screen using fuzzy logic in vision based pointing device. Our system classifies the line component of the input image into horizontal and vertical lines and applies the fuzzy rule to obtain the best line pair which constitute peripheral framework of the screen. The proposed system improves the detection ratio for detecting the screen in relative to the detector used in the previous works for hand-held type vision based pointing device. Also it allows to detect the screen even though a small part of it may be hidden behind other object.

• 대한산업공학회지
• /
• 제41권2호
• /
• pp.137-143
• /
• 2015

This thesis focuses on the 3D interface tab page type and mode of screen that affect the usability of the small screen devices such as smartphone. The experiments examined eight 3D UI designs, combinations of two modes (Portrait, Landscape) of screen, and four types (Vertical data mountain, Horizontal data mountain, Vertical carousel, Horizontal carousel). Twenty-six participants participated in the experiment. The completion time, preference and fun score were measured. The results showed that the vertical data mountain type provide the best performance in terms of the all conditions. The results of this study suggest a practical approach for the 3D UI tab page design for the small screen devices.

• 산업기술연구
• /
• 제29권B호
• /
• pp.127-131
• /
• 2009

This paper presents the development of smart counting system that is proper for grains with uneven unit weight or shape. This device can detect the small differences of a light beam and count the pulse from wave shape control, when the grain is going on the light screen, which is made by the light beam screen sensor. It can, different from the former conventional device, distinct the uneven grains for counting detect, by using the dedicated hardware and the software algorithm of the light sensor.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.147-151
• /
• 2008

모바일 기승의 발전으로 기존 PC 화면 기반으로 개발된 기능들이 모바일의 작은 화면으로 옮겨짐으로 인해 큰 화면의 정보를 작은 화면에 동일하게 표현하기 위해서 모바일 기기 화면상에 많은 가로 스크롤이 발생하게 되었다. 가로 스크롤로 인해 모바일 기기의 작은 화면으로 문서를 읽을 때 현재 읽고 있는 줄의 위치를 놓치는 오류가 발생하게 되었으며, 이러한 줄 이탈 오류로 인해 문서의 가독성이 떨어지게 되었다. 본 논문에서는 모바일 기기의 가독성을 높이기 위해서 Line Marker를 제안 하였으며, 실험을 통해서 Line Marker가 없는 조건, 이동하는 Line Marker 조건, 고정된 Line Marker 조건에 따른 문서의 읽기 속도와 읽기 방식에 따른 만족도를 평가하였다.

• 한국농촌건축학회논문집
• /
• 제21권3호
• /
• pp.17-24
• /
• 2019

This study aimed to develop a mobile separating and sorting device for discharge sites to separate and sort mixed construction waste generated in small and medium scale in small provincial cities into inorganic materials and combustible materials. The study results can be summarized as follows: 1) As a result of analyzing the existing domestic technology for the separating and sorting mixed construction waste, a device sorting the waste by fusing the vibration screen, disc screen, air blowing methods and the separating and sorting the combustible waste is applied in Korea. 2) In foreign countries, the air blowing, screen, gravity sorters are used for separating and sorting combustible waste in the same way as in Korea. Especially German T Company suggests a construction waste separating and sorting system using an optical sorter. 3) As for the test device for separating and sorting mixed construction waste to be buried in landfill, the processing capacity was set as 16 tons per day. 4) For separating and sorting inorganic materials by granularity, this study set a trommel with two types of diameter as a basic. To operate the mobile all-in-one system, the device is designed to locate a conveyor, a combustible waste conveying device, inside of the trommel. 5) The device is designed in a mobile mode under the concept of primary separating and sorting device, and it can be transported using a 2.5-ton truck minimum. The diameter and length of the trommel are designed to be within 1500mm and 3000mm, respectively. In a further study, an optimized separating and sorting technology is planned to be presented through an experimental study for processing efficiency analysis at the mixed construction waste site by manufacturing the pilot experiment facility reflecting the design elements in the result of this study.

• 대한의용생체공학회:의공학회지
• /
• 제43권4호
• /
• pp.219-229
• /
• 2022

In this study, we propose a miniaturized micro-ceramic heater device. After screen-printing a silver paste between pre-sintered two aluminum oxide plates to integrate a heating circuit, the device was fabricated through a low-temperature sintering process. In order to configure the optimal heating circuit integration condition, the output current evaluation and heating test were performed according to the number of screen prints of the silver paste at various voltages. A silver paste-based heating circuit printed with a line width of 200 ㎛ and a thickness of 60 ㎛ was successfully integrated on a pre-sintered alumina substrate through a low-temperature sintering process. In the case of the 5 times printed device, the thermal response showed a response rate of 18.19 ℃/sec. To demonstrate feasibility of the proposed device in the medical field, such as bio-tissue suturing and hemostasis, a voltage was applied to pig tissue in the device to test tissue change due to heat generated from the device. These results show the possibility that the proposed small ceramic heater could be used in the medical field based on its excellent temperature response.

• 대한인간공학회지
• /
• 제32권2호
• /
• pp.179-187
• /
• 2013

Objective: The purpose of this study is to extract GOMS manual operator, except for an experiment with participants. Background: The GOMS model has advantage of rapid modeling which is suitable for the environment of technology development which has a short life cycle products with a fast pace. The GOMS model was originally designed for desktop environment so that it is not adequate for implementing into the latest HCI environment such as small touch screen device. Therefore, this research proposed GOMS manual operator extraction methodology which is excluded experimental method. And flick Gesture was selected to explain application of proposed methodology to extract new operator. Method: Divide into start to final step of hand gesture needed to extract as an operator through gesture task analysis. Then apply the original GOMS operator to each similar step of gesture and modify the operator for implementation stage based on existing Fitts' law research. Steps that are required to move are modified based on the Fitts' law developed in touch screen device. Finally, new operator can be derived from using these stages and a validation experiment, performed to verify the validity of new operator and methodology by comparing human performance. Results: The average movement times of the participants' performance and the operator which is extracted in case study are not different significantly. Also the average of movement times of each type of view study is not different significantly. Conclusion: In conclusion, the result of the proposed methodology for extracting new operator is similar to the result of the experiment with their participants. Furthermore the GOMS model included the operator by the proposed methodology in this research could be applied successfully to predict the user's performance. Application: Using this methodology could be applied to develop new finger gesture in the touch screen. Also this proposed methodology could be applied to evaluate the usability of certain system rapidly including the new finger gesture performance.

• 한국분무공학회지
• /
• 제22권1호
• /
• pp.13-21
• /
• 2017

The fog screen is a device projecting the media to the aerosol flow field. As major parameters to generate dense and steady fog screen, shear stress, optical blockage ratio and SMD were obtained result through experiment. The micro droplet was generated by the piezo oscillation element, and the aerosol flow mixed with an air flow was sprayed into the vertical direction from the top of the fog screen through the 280 mm slot. For produce a dense, uniform fog screen, the shear effect, optical blockage ratio and SMD between aerosol and air curtain were measured. The minimum and maximum shear stress conditions were selected and it was confirmed that the optical transmission deviation of the aerosol flow field was small when the aerosol and air curtain flow rates were changed. When the aerosol and air curtain flow power were 18 V (1.51 m/s) and 24 V (2.55 m/s), respectively, under the condition of the minimum shear stress and laminar flow, the optical blockage ratios with the spray length were small, and it produced a most stable and high density uniform fog screen by injecting a constant of $10{\mu}m$ or less.

• 한국멀티미디어학회논문지
• /
• 제19권1호
• /
• pp.60-67
• /
• 2016

PC users have long been controlling their computers using input devices such as mouse and keyboard. To improve inconveniences of these devices, the method of screen-touching has widely been used these days, and devices recognizing human gestures are being developed one after another. Fox example, Kinect, developed and distributed by Microsoft, is a non-contact input device that recognizes human gestures through motion-recognizing sensors, thus replacing the mouse as an input device. However, when controlling the mouse on a large screen, it suffers from the problem of requiring large motions in order to move the mouse pointer to the edges of the screen. In this paper, we propose a joystick-driven mouse-controlling method which enables the user to move the mouse pointer to the corners of the screen with small motions. The experimental results show that movements of the user's palm within the range of 30 cm ensure movements of the mouse pointer to the edges of the screen.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.377-381
• /
• 2006

본 논문에서는 노즐출구 단면에 설치된 메쉬 스크린을 이용하여 초음속 제트 소음 제어하기 위한 실험을 수행하였다. 메쉬 스크린은 미소 직경을 가진 스테인레스 철사들로 만들어졌으며 철망 형태이다. 노즐 압력비는 과팽창에서 부족팽창된 초음속 제트를 얻기 위해 다양하게 변화시켰다. 초기 제트 전단층을 교란하기 위해, 메쉬 스크린의 중앙 부분에 구멍을 만들었으며 그 구멍크기는 메쉬 스크린의 소음 저감효과를 조사하기 위해 변화시켰다. 유동장을 가시화하기 위해 쉴리렌 광학 장치를 사용하였고 OASPL과 소음 스펙트럼을 얻기 위해 음향을 측정하였다. 본 실험으로부터 얻어진 결과는 메쉬 스크린이 스크리치 톤을 상당히 억제하였으며, 메쉬 스크린의 구멍크기는 초음속 제트 소음을 저감하는 중요한 인자였다. 과팽창된 제트인 경우, 소음 저감효과는 적정팽창과 부족팽창된 제트에서의 저감효과보다 매우 크게 나타났다.