• 한국전자파학회논문지
• /
• 제15권9호
• /
• pp.835-840
• /
• 2004

현재 사용되고 있는 소형 레이더 장치는 타선의 진운동정보(진침로, 진속력)나 충돌회피정보(CPA, TCPA) 및 주위 상황 변화에 대한 다양한 물표 정보를 제공할 수 없는 문제가 있다. 따라서 본 논문에서는 이와 같은 문제에 주목하여 일반 소형 어선에 탑재되어 있는 저가형의 소형 레이더 장치로부터 analog video signal, trigger, bearing 및 heading pulse를 공급받아 현용의 자동 레이더 플롯팅 장치(Automatic Radar Plating Aid, ARPA) 레이더에서 제공하는 수준의 각종 정보를 정량적으로 추출 및 제공할 수 있는 레이더 목표 추출 장치(Radar Target Extractor, RTE)를 개발하여 소형 레이더 장치에 부착시켜 소형 연근해 어선에서도 타선의 진운동정보 및 충돌회피 정보와 같은 항해 정보를 수집, 활용할 수 있도록 하였다.

• 산업기술연구
• /
• 제29권B호
• /
• pp.127-131
• /
• 2009

This paper presents the development of smart counting system that is proper for grains with uneven unit weight or shape. This device can detect the small differences of a light beam and count the pulse from wave shape control, when the grain is going on the light screen, which is made by the light beam screen sensor. It can, different from the former conventional device, distinct the uneven grains for counting detect, by using the dedicated hardware and the software algorithm of the light sensor.

• 한국추진공학회지
• /
• 제26권3호
• /
• pp.54-65
• /
• 2022

2단형 소형위성발사체 상단 메탄엔진에 다중점화가 가능한 간결한 점화기를 개발하고 있다. 첫 번째로 적층제조 기술을 활용하여 믹싱헤드와 일체형으로 다중점화장치를 설계 및 제작하였다. 두 번째로 연소기 헤드에 공급되는 점화 추진제를 주-추진제 배관에서 분기하여 공급함으로써 점화가스 저장을 위한 별도의 고압 용기가 필요없다. 1톤급 액체산소/액체메탄 엔진 연소기 헤드에 일체형으로 고안된 신규 점화기에 대해서 점화기 단독시험, 연소기 점화시험 및 연소기 성능시험 등의 다양한 시험을 수행하였고, 안정적인 점화 성능을 확인하였다.

• 한국추진공학회지
• /
• 제18권6호
• /
• pp.42-49
• /
• 2014

가상엔진 시뮬레이터를 이용한 시험장치는 실제 엔진을 이용한 시험과 유사한 시험 수행을 통하여 엔진 시험 횟수를 줄이고 동일한 조건에서 반복 시험이 가능하므로 엔진 정비 및 운용비용을 감소시켜 준다. 그리고 실제 시험에서 수행하기 어려운 극한 상황을 쉽게 구현할 수 있기 때문에 실제 엔진 시험 시 발생할 수 있는 엔진 손상 및 위험한 시험을 대체해 준다. 본 연구에서는 사전 연구를 통해 개발하였던 소형제트엔진 성능시험장치에 실시간 엔진 모델을 적용하여 실제 엔진 시험과 가상 엔진 시험을 다목적으로 수행할 수 있는 업그레이드 된 소형제트엔진 성능시험장치를 개발하였다. 새로 개발된 다목적 소형 제트엔진 성능시험장치는 교육용 및 연구용으로 더욱 다양하게 활용될 수 있을 것으로 기대된다.

• 신재생에너지
• /
• 제10권4호
• /
• pp.22-28
• /
• 2014

The thermoelectric generator using solar heat was applied to the device (heat-electricity conversion device) to produce small-scale electricity. The purpose of this study was to investigate the characteristics and performance of the device, which equipped with heat pipe as heat source. The experimental results showed that efficiency of circular single evacuated solar collector was higher 2.7 times than that of rectangular solar collector. Furthermore maximum power of 5 watt was obtained when 2 devices with series array were used and it could be more improved by increasing the number of device or measurement time.

• 대한전자공학회논문지
• /
• 제24권5호
• /
• pp.818-822
• /
• 1987

Gate capacitances have been measured directly on small-geometry MOSFET's with the drain voltage as a parameter for various channel lengths and for p and n channel types and the characteristics have been compared with each other. The influence of 'hot carrier effect' of short channel devices on capaciatance has been compared with long channel devices. The results show that gate capacitance characteristics of short channel device deviate from those of long channel device. The accuracy of the measurement system is less than a few femto Farad, and the minimum geometry (W/L) of device for which reliable measurement can be obtained is 6/3.

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.765-771
• /
• 2020

Automatic lubrication devices are applied in various fields, such as huge machinery, construction machinery or commercial vehicles, to lower maintenance costs and protect the devices. In addition, the automatic lubrication device reduces frequent component failures cause by friction and allows the machine to replace the lubricating oil replenishment work carried out by the manager. However, the automatic lubricating device used in large machinery or commercial vehicles is relatively large, containing a large amount of lubricant in the space to be lubricated. On the other hand, a smart factory, such as a home appliance or cosmetics factory, lacks space to install large automatic lubrication devices, and it is difficult to distribute electricity. Therefore, there is a need for an automatic lubrication device that can be used in various environments that require lubrication. In this paper, a small automatic lubrication device is proposed for smart factories that have changed parts of existing factories, such as electronics factories, to minimize friction arising from mechanical parts, etc. In particular, the structure of lubricating pumps and component parts that are the core of automatic lubrication devices was described so that they could be utilized in various fields. Finally, a test bed environment is established for the proposed automatic lubrication device to evaluate its performance and verify its applicability.

• 방사성폐기물학회지
• /
• 제12권1호
• /
• pp.79-88
• /
• 2014

원자력이용시설에서 발생한 작은 크기의 금속 조각들을 효과적으로 제염하는 스마트 장치를 개발하였다. 이 장치는 자성연마재를 포함한 영역의 자속밀도를 연속적으로 변화시키는 방법과 초음파를 이용하는 다중 제염장치이다. 한편, 제염 효율을 높이기 위해 제염 장치가 제염 대상 전체에 작용하도록 장치들의 구성을 수정하였다. 개발된 장치들의 최적 작동조건을 도출하여 샘플로 선정한 소형의 금속방사성페기물에 대하여 자기장과 초음파제염을 각각 15분간 실시하였다. 그 결과 제염계수의 범위는18~56으로 크게 향상되었으며 제염 후 모든 샘플은 백그라운드(BKG)값 이하로 확인되었다.

• 한국농촌건축학회논문집
• /
• 제21권3호
• /
• pp.17-24
• /
• 2019

This study aimed to develop a mobile separating and sorting device for discharge sites to separate and sort mixed construction waste generated in small and medium scale in small provincial cities into inorganic materials and combustible materials. The study results can be summarized as follows: 1) As a result of analyzing the existing domestic technology for the separating and sorting mixed construction waste, a device sorting the waste by fusing the vibration screen, disc screen, air blowing methods and the separating and sorting the combustible waste is applied in Korea. 2) In foreign countries, the air blowing, screen, gravity sorters are used for separating and sorting combustible waste in the same way as in Korea. Especially German T Company suggests a construction waste separating and sorting system using an optical sorter. 3) As for the test device for separating and sorting mixed construction waste to be buried in landfill, the processing capacity was set as 16 tons per day. 4) For separating and sorting inorganic materials by granularity, this study set a trommel with two types of diameter as a basic. To operate the mobile all-in-one system, the device is designed to locate a conveyor, a combustible waste conveying device, inside of the trommel. 5) The device is designed in a mobile mode under the concept of primary separating and sorting device, and it can be transported using a 2.5-ton truck minimum. The diameter and length of the trommel are designed to be within 1500mm and 3000mm, respectively. In a further study, an optimized separating and sorting technology is planned to be presented through an experimental study for processing efficiency analysis at the mixed construction waste site by manufacturing the pilot experiment facility reflecting the design elements in the result of this study.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.22-28
• /
• 2003

In the conventional weapon system, such as gun and small arms, it Is a general trend that for maximization of its performance and enhancement of its effectiveness, the firing control system(FCS) is developed and applied with the guns and small arms in the world. The FCS of the small arms for infantry man is composed of a few of sensors for acquisition of input data of FCS, such as range measurement, position sensing of weapon, temperature, etc., computer, displayer and power pack, and also the air burst munition is developed in parallel for the maximization of FCS's effectiveness. Since the flight time setting fuze for the air burst munition is adapted for next me, the measuring device of the muzzle velocity is needed to overcome the variation of muzzle velocity due to producing procedures and the differences of the using temperatures and so maintain the burst position accuracy This paper contained the technical information on the development of the measuring device of muzzle velocity, which designed in compact & light weight configuration with reliability and accuracy.