• Korean Journal of Organic Agriculture
• /
• v.19 no.2
• /
• pp.185-198
• /
• 2011

This study was carried out to select a proper forage crop, and to estimate the proper level of application of cattle manure and carrying capacity of organic livestock per unit area. Corns and forage sorghum hybrids were cultivated with different types of livestock manures and different amount of them to produce organic forage. For both corns and forage sorghum hybrids, no fertilizer plots had significantly (p<0.05) lower annual dry matter (DM), crude protein (CP) and total digestible nutrients (TDN) yields than those of other plots, whereas the N-P-K (nitrogen-phosphorous-kalium) plots ranked the highest yields, followed by 150% cattle manure plots and 100% cattle manure plots. DM, CP and TDN yields of in cattle manure plots were significantly (p<0.05) higher than those of no fertilizer and P-K (phosphorous-kalium) plots. The yields of in cattle slurry plots tended to be a little higher than those of in composted cattle manure plots. Assuming that corn and forage sorghum hybrids produced from this trial were fed at 70% level to 450kg of Hanwoo heifer for 400g of average daily gain, the carrying capacity (head/year/ha) of livestock ranked the highest in 150% cattle slurry plots (mean 6.0 heads), followed by 100% cattle slurry plots (mean 5.3 heads), 150% composted cattle manure plots (mean 4.7 heads), 100% composted cattle manure plots (mean 4.4 heads), and no fertilizer plots (mean 2.8 heads) in corns (or the cultivation of corns). Meanwhile, in the case of forage sorghum hybrids, 150% cattle slurry plots (mean 6.4 heads) ranked the highest carrying capacity, followed by 150% composted cattle manure plots (mean 4.8 heads), 100% cattle slurry plots (mean 4.4 heads), 100% composted cattle manure plots (mean 4.1 heads), and no fertilizer plots (mean 2.8 heads). The results indicated that the application of livestock manure to cultivated soil could enhance not only DM and TDN yields, but also the carrying capacity of organic livestock as compared with the effect of chemical fertilizers. In conclusion, the production of organic forage with reutilized livestock manure will facilitate the reduction of environmental pollution and the production of environmentally friendly agricultural products by resource circulating system.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.1
• /
• pp.55-64
• /
• 2011

This study was conducted to investigate the effects of green manure crops and cattle slurry application on rice productivity and nutrient movement in paddy land. Cropping systems used in this study were consisted of five designs, such as mono-cropping rice applied with standard fertilizer (MRS), double-cropping whole crop barley following rice applied with cattle slurry (DWBRC), double-cropping whole crop rye following rice applied with cattle slurry (DWRRC), mono-cropping rice applied with following milk vetch (MRMV) and mono-cropping rice applied with following hairy vetch (MRHV). The field experiments were conducted on the clay loam at Backsanmyun, Kimje, Chunlabukdo province in Korea for three years (May 2006 to Apr. 2009). This study was arranged in completely randomized design with three replicates. Culm and panicle length of rice were higher in MRS than other treatments. Ripened grain ratio was higher in MRS than other treatments. Yield of Grain showed high in MRS, DWBRC and DWRRC than MRMV and MRHV. The yield of dry matter (DM) of whole crop barley in DWBRC increased significantly as compared with that of rye in DWRRC. The pH, and contents of T-N, $P_2O_5$ and organic matter (OM) and exchangeable cation (Ca, Na, Mg and K) in soil samples collected at the end of the experiment were remarkably higher than those at the beginning of the experiment. The concentrations of $NO_3$-N, $NH_4$-N and $PO_4$ in discharge water in DWBRC and DWRRC were higher than MRS.

• Journal of Animal Environmental Science
• /
• v.7 no.3
• /
• pp.177-182
• /
• 2001

This study was conducted to find out the coefficient relationships between intensity values image processing and pollution density of slurries. Slurry images were obtained from the image processing system using personnel computer and CCD-camera. Software, written in Visual $c^{++}$, combined the functions of the image capture, image processing and image analysis. The data of image processing for slurries were analyzed by the method of regression analysis. The results are as follows. 1. Red(R)-values among image processing data were obtained the highest correlation coefficient 0.9213 for detecting COD. Also, green(G)-value were obtained the highest correlation coefficient 0.9019 fur detecting BOD. Blue(B)-value could not find significant values to detect the pollution resources density. 2. Hue(H)-values among image processing data were obtained the highest correlation coefficient 0.9466 for detecting BOD. This fact could be used in detecting BOD 3. Green(G)-value, GRAY-value, Hue(H)-value, Saturation(5)-value and Intensity(I)-value were the correlation coefficient more than 0.8 for BOD. Hue(H)-value was higher correlation coefficient than any other value. It was possible to detect pollution density of slurries by using the image processing system. 4. Red(R)-value, GRAY-value and Saturation(5)-value were obtained the correlation coefficient more than 0.8 for detecting COD. a-value had the highest correlation coefficient Among these values. It was possible to detect density indirectly by using the image processing system. 5. SS-density were obtained the correlation coefficient less than 0.8 by using the image processing system. The density of $NH_4$-N and $NO_3$-N were obtained correlation coefficient less than 0.2.

• Journal of Animal Environmental Science
• /
• v.8 no.2
• /
• pp.99-106
• /
• 2002

This study was conducted to improve utilization efficiency of slurry and choose a suitable type of tractor power which can be attached by manure spreader in the paddy field. In the paddy field, the pulling force for the spreader was measured by using a measurement system installed between tractors with and without the spreader. The soil moisture contents at the 0${\sim}$10cm and 10${\sim}$20cm depth of test soil(SiCL) were 28.45% d.b. and 23.47% d.b., respectively in average while Cone Index at l0cm and 15cm depth were 14.5kPa and 16.2kPa, respectively. It was impossible to measure the soil moisture contents and Cone Index below 20cm depth of the soil because the hardness of the soil increased greatly. Thereafter, hard pan of the sampled soil was found at 15${\sim}$20cm depth. While the required power only for the dragged tractor was found to be 3.44kW in the test field, the required pulling powers of tractor considering the pumping were 8.48${\sim}$12.48kW, 12.19${\sim}$16.19kW, 16.96${\sim}$20.96kW, respectively for 2 tons, 3 tons, and 4 tons of tank capacity. As the tank capacity increased, the sinkage of soil were also increased to 7cm, l0cm, and 12cm, respectively for the tractors with 2 tons, 3 tons and 4 tons of tank capacity. Considering about 60% of pulling efficiency of tractor, a tractor which had lower than 25.74kW of pulling power was suitable to pull the spreader and spread the slurry simultaneously for manure spreader with 2 tons of tank capacity. 29.42kW${\sim}$36.78kW of pulling power was found to be optimum for the tractor with 3 tons of tank capacity while over 40.45kW for 4 tons of tank capacity.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.91-100
• /
• 2009

In regional nutrient quota system, livestock manure was applied as liquid fertilizer after slurry composting and biofiltration (SCB) process. This study was conducted to evaluate the effect of SCB liquid fertilizer on turfgrass growth in golf course during 6 month period from May to October in 2008. Fertilizer treatment was designed as follows; non-fertilizer (NF), control (CF; compound fertilizer), S-1 (1L SCB${\cdot}m^{-2}$) and S-2 (2L SCB${\cdot}m^{-2}$). Every treatment was arranged in a randomized complete block design with three replications. In creeping bentgrass, turf color index, chlorophyll content, and dry weight were measured. Results were as follows; A seasonal change pattern of turf grass quality in all treatment increased in April $\sim$ June and September $\sim$ October, whereas it decreased in July $\sim$ August. As compared with NF, turf color index of CF, S-1 and S-2 increased by 1.8%, 1.8%, and 3.3%, respectively and chlorophyll content by 13%, 14%, and 20%, respectively. Dry weight of CF, S-1, and S-2 was higher than that of NFl by 7.7%, 18.2%, and 18.1%, respectively. For turf color index, chlorophyll content, and dry weigh, S-2 showed the best effect, followed by S-1 and CF in creeping bentgrass. These results indicated that the SCB application improves turf growth and quality.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.1
• /
• pp.77-88
• /
• 1992

Effective strains of cowpea bradyrhizobia JB7 $nal^rspe^r$ and CB756 $str^rrif^r$, antibiotic-resistant variants of JB7 and CB756, respectively, were used to examine changes of rhizosphere populations and nodule occupancy. Populations of each strain increased gradually in the rhizosphere, reaching a maximum of about $10^8$ cells per root system. Nodule number increased as the density of inoculum increased from $10^2$ cells to $10^8$ cells per seed. Inoculation with liquid suspension resulted in the formation of more nodules than the peat slurry or granule inoculation. When JB7 $nal^rspe^r$ and CB756 $str^rrif^r$ were introduced in equal numbers in inoculum mixtures the former consistantly occupied the majority of nodules with all three groundnut cultivars used. There was no difference in yield between nitrogen treatments and inocultation treatments.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.459-468
• /
• 2011

The main purpose of this study was to examine the influence of treatment amounts of Slurry Composting and Biofiltration liquid fertilizer (SCBLF) on biomass growth of Yellow poplar (Liriodendron tulipifera) and to compare bioethanol production from the harvested wood. Relative growth rate, biomass production and leaf characteristics were significantly enhanced by SCBLF treatment and medium treatment plot showed highest value. Nitrogen compounds and water content in SCBLF affected to increase chlorophyll contents which led improving biomass production (64.67%) and glucose contents (6.07%) than control. Organosolv and dilute acid pretreatments were preliminarily carried for bioethanol production, and the pretreatment processes were conducted at all the same solid to liquid ratio (1 : 10), reaction temperature ($150^{\circ}C$), preheating time (40 min) and residence time (10 min). The water insoluble solid recovery of Organosolv pretreatment with 1% sulfuric acid as a catalyst was the lowest and that of medium treatment plot was 44.81%. Exchangeable cations in SCBLF might be affected to increase pretreatment effect. The simultaneous saccharification and fermentation process was followed to determine the ethanol production of the pretreated biomass. The highest ethanol production yield based on initial weight was obtained from high treatment plotby Organosolv pretreatment with 1% sulfuric acid (16.11%). But regarding biomass production, medium treatment plot produced most, and bioethanol production was increased by 72.93% than control.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.3 s.40
• /
• pp.47-51
• /
• 2006

Recently, CMP (Chemical Mechanical Polishing) is one of very important processing in semiconductor technology because of large integration and application of design role. CMP is a planarization process of wafer surface using the chemical and mechanical reactions. One of the most important components of the CMP system is the polishing pad. During the CMP process, the pad itself becomes smoother and glazing. Therefore it is necessary to have a pad conditioning process to refresh the pad surface, to remove slurry debris and to supply the fresh slurry on the surface. A conditioning disk is used during the pad conditioning. There are diamonds on the surface of diamond disk to remove slurry debris and to polish pad surface slightly, so density, shape and size of diamond are very important factors. In this study, we characterized diamond disk with 9 kinds of sample.

• Journal of Animal Environmental Science
• /
• v.20 no.2
• /
• pp.69-76
• /
• 2014

This study was aimed at investigating a filtration bed system for the production of liquid fertilizer using wastewater generated after anaerobic digestion of animal manure. Slurry, Compost, & Biofiltration-Methane System, designed by Korean National Institute of Animal Science, is now a standard method to recycle anaerobic digestion wastewater. However, currently provided protocol to run the system needs continuous upgrades as the system is relatively new and can be more cost-effective if few adjustments are made. In this study, we tried to enhance the capability of the system to process anaerobic digestion wastewater by replacing the bed materials with the cheaper one, and determining the time point of operation from which filtrates can be utilized for fertilization.

• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.217-222
• /
• 1999

The pick up impurity was studied for preparing the NiCuZn ferrite powder by a ball milling method that usually uses in the industrial ceramic process. The raw materials of NiO, CuO, ZnO, and $Fe_2O_3$ powder were weighted according to various spinel composition and mixed for 18 hrs by a wet ball milling method after that the slurry was followed by spray dried and calcined at $700^{\circ}C$ 3 hrs. The calcined NCZF powder was finally ball milled during 65 hrs as same method. The stainless steel ball and jar are used as mixing and milling equipment and the solid concentration of the slurry was 25 vol%. The impurities, stainless steel pickup, were effected by the composition of raw materials especially iron oxide, nickel oxide in the mixing process and by the rate of calcine of NiCuZn ferrite in final milling process. The empirical equation of stainless steel pickup was driven in the wet ball milling system. Finally, the composition of NiCuZn ferrite could be controlled by the empirical equation.