• 자원리싸이클링
• /
• 제26권6호
• /
• pp.45-49
• /
• 2017

반도체 산업의 실리콘(Si) 제조과정에서 실리콘과 실리콘 카바이드(SiC)를 포함하는 폐 슬러리가 발생하게 된다. 폐 슬러리는 단순히 시멘트로 고형화하여 보관하거나 매립하는 방법이 있지만, 본 연구에서는 제강공정의 부원료인 승온제로 사용하는 방안이 제시되었다. 폐 슬러리를 정제하여 분말을 만들어 SiC계 슬러지 브리켓으로 재활용하였다. SiC계 슬러지 브리켓은 화학적 성분을 분석하고 투입시기와 투입량에 따른 승온제 특성을 관찰하였다. 이 결과 SiC계 슬러지 브리켓은 제강공장에서 저비용과 고효율로 용강온도를 높이는 효과가 있었다.

• 펄프종이기술
• /
• 제36권4호
• /
• pp.77-82
• /
• 2004

Expression-deliquoring tests using three types of paper sludges (tissue, newsprint, and paperboard) as deliquoring agent were carried out in order to investigate the effects of sludge dosage and pressure on the expression-deliquoring of slurry. The addition of deli­quoring agent causes expression-deliquoring of slurry to be faster than would be the case without the deliquoring agent. In case of the tissue sludge, the highest compression rate was achieved when $5\%$ of deliquoring agent was added, while in cases of the news­print and the paperboard sludge, $7\%$. Compression rate was increased as pressure increases. Porosity was decreased as pressure increases. The lowest porosity was observed when $5\%$ of tissue sludge was added. When compared the weight of cake where deliquoring agent was not added and the weight of cake that was fastest expression-deliquoring, there was about $17.5\%$ of the weight reduction

• 한국환경농학회지
• /
• 제29권2호
• /
• pp.197-205
• /
• 2010

돈분 슬러리를 이용한 혐기성 소화과정에서 유기물 농도 및 식종슬러지의 식종비율, 소화조의 혼합강도 등의 최적 실험조건을 도출하고, 돼지의 성장에 따른 사료 급여 특성과 분뇨의 성상이 바이오가스 발생에 미치는 영향을 관찰하였다. 식종슬러지 비율 50%와 TS 농도 1% 수준에서 메탄함량은 45%이었고, 유기물 함량이 3~7 %로 증가할수록 메탄가스 함량도 증가되었다. 반응조의 혼합강도에 따른 총 누적가스 발생량은 식종슬러지의 식종비율에 따른 영향은 관찰되지 않았고, TS 농도 3%와 5%에서 혼합강도를 증가시켰을 때(80 $\rightarrow$ 160 rpm) 바이오가스 발생량도 증가되었다. 돈분폐수의 혐기소화 실험시 바이오가스를 회수하고자 하는 최적의 운전 조건은 투입되는 TS 농도 3~5% 정도의 유기물 농도와 50% 수준의 식종슬러지의 식종비율 그리고 반응조의 적절한 교반강도(120 rpm) 따라 결정될 수 있다. 돈분뇨 종류에 따른 가스발생량은 분만돈 분뇨의 바이오 가스 발생량이 높았고, gas 발생의 peak(20일)도 짧게 나타나 분해율이 가장 좋은 것으로 나타났다. 돼지의 사육 및 소비 형태에 따라 돼지의 사육 환경이 변화되며, 투입되는 사료의 급여 특성도 달라져 바이오가스 발생 특성도 차이가 있는 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제4권3호
• /
• pp.194-202
• /
• 1972

방사성 폐액처리에서 나오는 방사성 Sludge의 Solar energy에 의한 고화 처리방법은 가장 효과적이고 경제적인 처리방법의 하나이다. 본연구를 통해서 Sludge의 고화처리는 3月부터 8月사이가 가장 적정기이고, 또 Mass-transfer방법에 의해 증발량 추정에 대한 실험식을 유도하였다.

• 한국축산시설환경학회지
• /
• 제19권1호
• /
• pp.47-54
• /
• 2013

Two types of reactors were set to investigate the change of characteristics of pig slurry by aeration during fertilization period. One system was equipped with air diffuser to supply oxygen to pig slurry for liquid fertilization, but there was no air diffuser in the other system. Air supply to the experimental systems was regulated by air flow meter. The reactors were set up in the laboratory to protect the pig slurry from external condition such as temperature and humidity changes. Maintaining optimal pH range in the experimental reactors is an important factor for liquid fertilization of pig slurry. In this study, pH ranges of aerobic reactor and anoxic reactor was 7.04~7.19 and 7.34~7.81, respectively. The temperature of aerobic reactors was $2{\sim}3^{\circ}C$ higher then indoor temperature. The amount of sludge accumulated at the bottom layer of non-aerated reactors was 4~5 times more than that of aerated reactors.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.415-420
• /
• 2001

Water usage in the semiconductor industries is dramatically increased by not only using bigger wafer from 8 inches to 12 inches but also by adapting new process such as Chemical Mechanical Planarization (CMP) process invented by IBM in late '80. However, The document published by International Semiconductor Association suggests the decreasing ultra pure water (UPW) use from 22 gallon/in$^2$in 1997 to 5 gallon/in$^2$ in 2012. The criteria will possibly used as exporting obstacle in the future. Generally, Solid content of CMP slurry is about 15wt%. The slurry is diluted with UPW before fed to a CMP process. When the slurry is discharged from the process as waste, it contains 0.1~0.6wt% of solid content and 9~10 at pH. The CMP waste slurry is discharged to stream with minimum treatment. In this study, to find optimum condition of coagulation for water recovery from the waste CMP slurry various condition of coagulation were examined. After coagulation far 0.1 wt% solid content of waste CMP slurry, the sludge volume was 10~15% after 30 min of sedimentation time. For the 0.5 wt%, sludge volume was 50~55% after one hour of sedimentation time. For more than 80% of water recycling, the solid content should be in the range of 0.1 to 0.2wr%. Based on the result of the turbidity removal, the Zeta Potential and the analysis of heavy metals, the optimum condition for 0.1 wr% of waste CMP slurry was with 20 mg/L of PACI at 4 to 5 of pH. The result showed that the optimum conditions fer the 0.1 wt% waste CMP slurry were 100mg/L of Alum at 4~5 of pH, 100 mg/L of MgCI$_2$at pH 10 to 11 and 100 mg/L of Ca(OH)$_2$at pH 9 to 11, respectively.

• 한국터널지하공간학회 논문집
• /
• 제26권3호
• /
• pp.243-254
• /
• 2024

현재 국내 지역의 산업 발달로 인해 주요 도심은 물론 주변 도시 지역에도 건축물이 포화 상태이다. 이에 따라 사람들의 관심은 지하공간으로 쏠리게 되었고, 특히 도시개발에 있어서 터널은 광범위하게 활용되고 있다. 이에 따라 터널 및 터널굴착공법에 대한 연구가 활발히 진행되고 있다. 그러나 이수식 쉴드 TBM 사용 시 슬러지 배출관의 마모 및 파손 문제에 대한 연구는 부족한 실정이다. 따라서 본 논문에서는 기존 슬러지 배출관에 사용된 L자형 곡관을 T자형 곡관으로 변형하여 슬러지를 이동시켰다. 그 결과, L자형 곡관에 비하여 T자형 곡관이 슬러지 배출 시 곡관에 미치는 영향이 감소하는 것을 확인할 수 있었다. 이러한 결과를 바탕으로 이수식 쉴드 TBM 장비 사용 시 T자형 곡관을 사용하면 슬러지 배출관의 마모를 최소화할 수 있을 것으로 기대된다. 이는 결국 터널 공사 시 곡관 교체나 추가 용접에 따른 비용을 절감하는 등 경제적 이익으로 이어질 것으로 기대된다.

• 연구논문집
• /
• 통권30호
• /
• pp.67-77
• /
• 2000

This study was performed to investigate the characteristics and performance of model Decanter for separating swine wastewater to solid and liquid which is slurry state with 12.6% TS. Swine wastewater of the slurry tank was pumped into model Decanter which capacity was $2m^3$/hr in 10% TS Slurry inside of bowl was separated to solid-liquid by centrifugal acceleration. Sampling was done in the section of slurry feed pipe, supernatant outflow pipe, cake discharge pipe. After solid-liquid separation TS, $COD_cr$ and slurry volume reduction effect represented 38%, 40%, 19.6% respectively. Relation factor of model Decanter operation slurry concentration, optimum retention time of slurry, overflow velocity of supernatant, supernatant concentration, sludge removal rate etc. Optimal operation conditions can be set and evaluated efficiency based on the experimental results in the case of Decanter adopted for solid-liquid separation in highly concentrated swine wastewater.

• 상하수도학회지
• /
• 제18권6호
• /
• pp.715-723
• /
• 2004

The quantity of residuals generated from water treatment plants depends upon the raw water quality, dosage of chemicals used, performance of the treatment process, method of sludge removal, efficiency of sedimentation, and backwashing frequency. Sludge production by the physical separation of SS occurs under quiescent conditions in the primary clarifier, where suspended solids are allowed to settle and to consolidate on the clarifier bottom. Raw primary sludge results when the settled solids are hydraulically removed from the tank. The relative solid and liquid fractions of a slurry are most commonly described by the solids concentration, expressed as mg/L or percent solids. The purpose of the present investigation is to estimate a suitability on the design capacities of residuals treatment facilities by the quantity of dewatered sludge generated from water treatment plants.

• Applied Science and Convergence Technology
• /
• 제26권1호
• /
• pp.1-5
• /
• 2017

The spurt vacuum pump is widely used to transfer sludge and slurry, and to control flow rate in a variety of processing fields, such as the oil, chemical, and fiber industries. The efficiency of the pump depends on the design parameters of the impeller, such as the number of blades, and the blade angle. In this study, the effect of the configuration of the impeller discharge angle of a spurt vacuum pump, which influences total head, shaft power, and efficiency, was numerically investigated using the commercial code, ANSYS CFX ver. 16.1. In addition, the performance of the pump was evaluated on the basis of the correlations between the total head, pump efficiency, and pressure distribution.