DOI QR코드

DOI QR Code

Effect of The Impeller Discharge Angle on the Performance of a Spurt Vacuum Pump

  • Lee, Ji-Gu (Graduated School of Mechanical Engineering, Sungkyunkwan University) ;
  • Kim, Youn-Jea (School of Mechanical Engineering, Sungkyunkwan University)
  • Received : 2016.11.08
  • Accepted : 2016.12.01
  • Published : 2017.01.31

Abstract

The spurt vacuum pump is widely used to transfer sludge and slurry, and to control flow rate in a variety of processing fields, such as the oil, chemical, and fiber industries. The efficiency of the pump depends on the design parameters of the impeller, such as the number of blades, and the blade angle. In this study, the effect of the configuration of the impeller discharge angle of a spurt vacuum pump, which influences total head, shaft power, and efficiency, was numerically investigated using the commercial code, ANSYS CFX ver. 16.1. In addition, the performance of the pump was evaluated on the basis of the correlations between the total head, pump efficiency, and pressure distribution.

Keywords

References

  1. J. E. Yun, 2011, "CFD Analysis of Submersible Slurry Pump with Two Blades", Spring Conference of the Korean Society of the Mechanical Engineers, ISSN 1226-4881, pp. 263-268 (in Korean).
  2. J. W. Kim, H. S. Seo, H. G. Ji, Y. K. Jung, and Y. J. Kim, 2014, "Effect of Inducer Inlet Angles on the Performance of Self-priming Vacuum Pump", Autumn Conference of the Korean Society of Mechanical Engineers, pp. 126-131 (in Korean).
  3. M. G. Patel, and A. V. Doshi, 2013, "Effect of Impeller Blade Exit Angle on the Performance of Centrifugal Pump", International Jounal of Emerging Technology and Advanced Engineering, Vol. 3, Issue 1, pp. 702-706.
  4. B. K. Gandhi, and S. N. Singh, V. Seshadri, 2002, "Effect of Speed on the Performance Characteristics of a Centrifugal Slurry Pump", Journal of Hydraulic Engineering, Vol. 128, No. 2, pp. 225-233. https://doi.org/10.1061/(ASCE)0733-9429(2002)128:2(225)
  5. H. B. Jin, M. J. Kim, C. H, Son, and W. J. Chung, 2012, "Spiral Casing of a Volute Centrifugal Pump-Effect of the Cross Sectional Shape- ", The KSFM Journal of Fluid Machinery, Vol. 16, No. 4, pp. 28-34 (in Korean) https://doi.org/10.5293/kfma.2013.16.4.028
  6. C. H. Choi, G. S. Lee, J. H. Kim, and S. S, Yang, 2001, "Numerical Study on the Hydrodynamic Performance Prediction of Turbopump Inducers", Spring Conference of the Korean Society of the Mechanical Engineers, pp. 625-630 (in Korean).
  7. Krishnan V. Pagalthivarthi, Pankaj K. Gupta, Vipin Tyagi, and M. R. Ravi, 2011, "CFD Predictions of Dense Slurry Flow in Centrifugal Pump Casings", World Academy of Science, Engineering and Technology International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol. 5, No. 3.
  8. Xiang-Ji Yue, Yan-Jun Lu, Ying-Li Zhang, De-Chun Ba, and Guang- Yu Wang, 2015, "Computational Fluid Dynamics Simulation Study of Gas Flow in Dry Scroll Vacuum Pump", Science Direct, Vol. 116, pp. 144-152
  9. Jose Gonzalez, Joaquin Fernandz, Eduardo Blanco, and Carlos Santolaria, 2002, "Numerical Simulation of the Dynamic Effects Due to Impeller-Volute Interaction in a Centrifugal Pump", Journal of Fluid Engineering, Vol. 124, pp. 348-355. https://doi.org/10.1115/1.1457452
  10. H. H. Shin. (2011). "Impeller for Spurt Pump and Spurt Pump for Underwater Having Thereof", KR Patent 10-2010-0060743.
  11. Sinhan pump tech, Catalogue of high-efficiency Spurt Vacuum Pump, http://www.1181.co.kr/.