• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.1
• /
• pp.57-66
• /
• 2012

This study focuses on the applicability of hill housing design in accordance with topographic characteristics on sloping sites. The urgency for housing still exists but hill sites have to be planned by gradual development using 'all available land' within any particular community. However, there is a reaction towards being more closely involved with nature and landscape. Sloping and hill sites must be developed by intelligent and sensitive planning, integrating the existing environmental factors. The results of this study are as follows : 1. The conditions of location are regarded as the concepts of spactial configuration. It should be developed on the basis of awareness that nature and human beings exist together. 2. It is inevitable that the development of the hill housing should be performed prefer to the topographic characteristics. 3. Planning elements of ecological residental blocks which are possible for constructing on the hill site can be developed and applied, on the basis of geographical characteristics, by housing types.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2004.11a
• /
• pp.189-194
• /
• 2004

Owing to the mass-housing policies of high-density and high-rise, the residential environments in Korea have come to be uniform and monotonous. Nevertheless, the design competitions introduced for the first time in 1980s have Played significant roles in developing the fresh ideas and concepts in housing design. And in our country, the land of the gradient $0-9^{\circ}$ that is able to plan as level sites come up to 32.5% of the total land and the land of the gradient $10-29^{\circ}$that should be designed by considering the characteristics of the sloping sites is 53.2% of the whole. For that reason, the development of the apartment housing in the sloping site has been done largely to solve the issues associated with the scarcity of the land. Therefore, it is very meaningful job to see the various design methods on the basis of the characteristics of the sites, particularly gradient, by analyzing the prizewinners in the design competitions. In this context, the research analyzed the works that won the design competition after 1990, and organized the types of the block plans and the design characteristics applied in our residence housing. Secondarily, it classified that types by the gradient and analyzed statistically and compared the numerical value.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.61-71
• /
• 2006

A numerical procedure is presented fur evaluating seismic liquefaction on sloping ground sites. The procedure uses a fully coupled dynamic effective stress analysis with a plastic constitutive model called UBCSAND. The model was first calibrated against laboratory element behavior. This involved cyclic simple shear tests performed on loose sand with and without initial static shear stress. The numerical procedure is then verified by predicting a centrifuge test with a slope performed on loose Fraser River sand. The predicted excess pore pressures, accelerations and displacements are compared with the measurements. The results are shown to be in good agreement. The shear stress reversal patterns depend on static and cyclic shear stress levels and are shown to play a key role in evaluating liquefaction response in sloping ground sites. The sand near the slope has low effective confining stress and dilates more. When no stress reversals occur, the sand behaves in a stiffer manner that curtails the accumulated downslope displacements. The numerical procedure using UBCSAND can serve as a guide for design of new soil structures or retrofit of existing ones.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.6
• /
• pp.421-426
• /
• 2009

The purpose of this study was to identify soil physical characteristics as guideline for high yield potential in ginseng cultivated field which produced 6 years root. Harvest yields of ginseng to be divided by parent rock was in order of phyllite and red shale 3.1 kg/$3.3\;m^2$ > granite and gneiss schist 3.0 kg > basalt 2.6 kg > porphyry 2.2 kg in upland and forest soil. Also, with classified by topography, it was in order of foot slope and alluvial fan 3.2 kg/$3.3\;m^2$ > valley 3.0 kg > low hill 2.9 kg > hill, lave flow and dilluvial terrace 2.8 kg in survey tilth. Class determination of soil texture, it was in order of sandy loam 3.1 kg/$3.3\;m^2$ > loam and silt loam 3.0 kg > clay loam 2.9 kg > silt clay loam 2.8 kg in survey tilth. Slope condition of farming land, in case of sloping (2~7%), it was 3.1 kg/$3.3\;m^2$ but deep sloping (15~30%) caused decreasing harvest yield. In drainage classes (excessively, well and moderately well), there was no significantly different in harvest yields. Relationship between harvest yield and soil series, Production sites as yielding 3.0 kg/$3.3\;m^2$ were seven sites, also it was contained 14 soil series. Production sites as yielding 2.5~3.0 kg/$3.3\;m^2$ were eleven sites, it was contained 16 soil series. Production sites as yielding 2.0~2.5 kg/$3.3\;m^2$ were 10 sites, it was contained 4 soil series.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.9 no.1
• /
• pp.91-98
• /
• 2009

My questionaire survey revealed that even those experts that engage in architectural design did not precisely understand much of the regulations concerning ground-level. In terms of restricting the size of the building area, the generous policy of excluding balconies and basements from the calculation of building size actually causes problems. As far as the right to sunshine is concerned, the weighted average ground-level is determined to be the ground-level standard of the neighboring plot when the neighboring plot is a sloping bare ground. When the difference of heights is over 3 meters, it would be appropriate to assess the weighted ground-level standard every 3 meters.

• Journal of Life Science
• /
• v.14 no.3
• /
• pp.459-466
• /
• 2004

The purpose of the precent investigation was to investigate diversity patterns in a fragmented Young-do forested landscape. It was conducted on sloping 18 plots (twelve 50$\times$50 m plots and six 10$\times$100 m plots). Total 1562 individuals were identified and measured in the 50$\times$50 m plots. These were a total of 68 species of 23 families present in the three sites. Least significant differences (LSD) by post hoc analysis revealed that fragments site A had significantly greater densities than site B. Shannon-Wiener functions differed significantly among forests (F=4.12, p＜0.05), with site A forest having significantly higher value (3.401) than the others (2.590 for site B and 2.648 for site C). Pinus thunbergii and Quercus aliena were dominant on most sites. site. The Pinus densiflora forest of sites A and C is distributed better in the NE exposures compared with the opposite ones. Ficus erecta and Pinus densiflora largely occupied the southern exposures. The spatial distribution in southern Young-do's littoral forest was very heterogeneous, reflected by most species having low densities and patchy distributions.

• ALGAE
• /
• v.27 no.1
• /
• pp.33-42
• /
• 2012

Population ecology of Palmaria palmata is described from the intertidal zone of Digby Neck and adjacent islands of Nova Scotia. The primary objectives were: to evaluate the difference in habitat specialization and population structure of P. palmata between harvest and non-harvest shores, and to characterize differences in thallus structure and frond sizes between epilithic and epiphytic populations. Harvest shores were gently sloping boulder fields with boulders typically about 0.5-1.0 m with dense cover of P. palmata on many of the rocks. Non-harvest shores (with or without P. palmata) consisted of boulders that were smaller or larger than harvest shores, or bedrock; when P. palmata was present on nonharvest sites it was typically epiphytic on other algae (e.g., Fucus spp., Mastocarpus stellatus, Devaleraea ramentacea). Harvestable epiphytic populations occurred only in high current areas. While there was little difference in average cover of P. palmata harvest and non-harvest shores ($31.2{\pm}13.7%$ vs. $19.4{\pm}7.3%$, mean ${\pm}$ standard deviation [SD]), the cover of P. palmata on harvest shores was highly skewed such that individual boulders often had >90% cover while adjacent rocks had little. Frond length of large fronds was greater on harvested shores, and mean frond density ($g\;m^{-2}$) was three times higher than the mean density on the non-harvested shores. Frond lengths of entire epiphytic and epilithic frond complements of 119 thalli from harvest beaches showed no difference in mean size of the largest fronds, and no difference in frond number per holdfast when epiphytic and epilithic thalli were compared.

• Geotechnical Engineering
• /
• v.8 no.1
• /
• pp.81-102
• /
• 1992

Landslides on hillside slopes with shallow soil cover over a sloping bedrock are frequently caused by increases in porewater pressures following of heavy rainfall and it is one of the most important factors of assessing the risk of landslide to predict the groundwater level fluctuations in hillslopes. This paper presents the comparative study of three unsaturated flow models developed by Sloan et al., Reddi, L.N., and Thomas, H.A., Jr., respectively, which are used to predict the increase of groundwater levels in hillside slopes. The parametric study for each of models is also presented. The Kinematic Storage Model(KSM) developed by Sloan et at. is utilized to predict the saturated groundwater flow. They are applied to the two sites in Korea so as to examine the possibility of use in the groundwater flow model. The results show that two unsaturated models developed by Sloan et al. and Reddi, L. N. are largely affected by the uncertain parameters like saturated permeability and saturated water content : the abed model has the potential of use in unsaturated flow model with the optimal estimates of model parameters utilizing available optimization techniques. And it is also found that the KSM must be modified to account for the time delay effect in the saturated zone. The results of this paper are able to be utilized in developing the predictive model of groan dwater level fluctuations in a hillslope.

• Korean Journal of Environmental Biology
• /
• v.35 no.3
• /
• pp.398-412
• /
• 2017

The aim of this study was to collect the basic data for effective creation and management of hilly pasture. The investigation of flora and vegetation was conducted at 59 $relev\acute{e}s$ in hilly pasture of Daegwallyeong from 2014 to 2016. The vascular plants of the hilly pasture were 121 listed taxa which contain 38 families, 90 genera, 104 species, 13 varieties, and 12 subspecies. The biological type of the hilly pasture was determined as the $Th-D_4-R_5-e$ type. Twelve taxa were of naturalized plants composed of 5 families, 9 genera, 12 species. The urbanization index and the naturalized index were 3.7% and 9.9%, respectively. The vegetation types in the hilly pasture were classified into the following 3 communities: the Spiraea miyabei-Spiraea salicifolia community, the Persicaria thunbergii community, and the Agrostis alba-Phleum pratense community. The Agrostis alba-Phleum pratense community was classified into the following 5 subcommunities: the Poa pratensis subcommunity, the Artemisia princeps subcommunity, the Festuca ovina subcommunity, the Rumex acetosella subcommunity, and the typical subcommunity. Two factors (slope and EC) had the strongest impact on plant community distribution. Especially, the steep sloping sites (over $40^{\circ}$) did not play a crucial role in maintaining adequate pasture because of the invasion and establishment of shrubs.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.1
• /
• pp.27-34
• /
• 2012

$Li_3V_2(PO_4)_3$/carbon composite materials are synthesized from a sucrose-containing precursor. Amorphous $Li_3V_2(PO_4)_3/C$ (a-LVP/C) and crystalline $Li_3V_2(PO_4)_3/C$ (c-LVP/C) are obtained by calcining at $600^{\circ}C$ and $800^{\circ}C$, respectrively, and electrochemical performance as the negative electrode for lithium secondary batteries is compared for two samples. The a-LVP electrode shows much larger reversible capacity than c-LVP, which is ascribed to the spatial $Li^+$ channels and flexible structure of amorphous material. In addition, this electrode shows an excellent rate capability, which can be accounted for by the facilitated $Li^+$ diffusion through the defect sites. The sloping voltage profile is another advantageous feature for easy SOC (state of charge) estimation.