• 제목/요약/키워드: Slope Stability Measures

검색결과 47건 처리시간 0.034초

연계해석(Coupled Analysis)에 의한 간극수압이 사면안정에 미치는 영향 (Effect of Pore Water Pressure on Slope Stability by Using Coupled Finite Element Analysis)

  • 신종호;김학문;장경준
    • 한국지반공학회논문집
    • /
    • 제25권2호
    • /
    • pp.25-35
    • /
    • 2009
  • 사면붕괴는 매년 인간의 활동에 엄청난 재정적 손실을 끼치는 중요한 재난중의 하나이다. 사면의 붕괴특성을 고찰한 결과 강우와 매우 밀접한 상관성이 있음을 알 수 있었다. 기존 연구에 따르면 우기시 강우로 인한 간극수압의 영향으로 인하여 대부분의 사면붕괴 사고가 발생하였다. 기존사면의 안전율은 사면의 풍화 등 열화 거동과 강우 등의 작용으로 인해 점차 감소하고 있으나 식생, 보호공, 보강공 등으로 인해 안전율을 상승시키는 활동이 가미되어 실제기존사면의 적정한 평가가 어렵다. 따라서 사면의 절취 및 보수보강이 완료된 직후부터 현재까지의 안정성에 영향을 미치는 요소를 누적적으로 고려할 수 있는 시간 의존적 해석도구가 필요하다. 본 연구에서는 변위-간극수압을 고려한 연계 수치해석 기법을 채택하여 무보강 사면과 보강사면으로 구분하여 시간 의존적 거동을 고려하는 수치해석(coupled numerical analysis)을 실시하였다. 이로부터 기존사면의 간극수압에 따른 영향을 평가하고, 연계해석을 해석 도구로 하는 안정해석 기술을 제시하고자 하였다.

위험절토사면의 안정성평가 및 상시계측시스템 설치를 위한 수치해석적 연구 (A Study on Stability Evaluation and Numerical Analysis for Installing of Real-Time Monitoring System on Risky Road Cut Slope)

  • 최지용;이종현;이정엽
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.1139-1146
    • /
    • 2009
  • Collapse of cut slope includes many uncertainties in view of the reason and time. So, in the past, risky cut slopes have been dealt after they've been collapsed through post-management measures. But recently, advanced disaster prevention system is required, and as a part of that RTMS(Real-Time Monitoring System) was developed. In this study, stability of risky cut slope was evaluated by site investigation. To grasp deformation behavior characteristics of slope, numerical analysis based on FEM was performed and using results of that, specific standards for installation of Real-Time Monitoring System were suggested.

  • PDF

Reliability-based Optimization for Rock Slopes

  • 이명재
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1998년도 터널.암반역학위원회 박사학위 논문집
    • /
    • pp.3-34
    • /
    • 1998
  • The stability condition of rock slopes is greatly affected by the geometry and strength parameters of discontinuities in the rock masses. Rock slopes Involving movement of rock blocks on discontinuities are failed by one or combination of the three basic failure modes-plane, wedge, and toppling. In rock mechanics, practically all the parameters such as the joint set characteristics, the rock strength properties, and the loading conditions are always subject to a degree of uncertainty. Therefore, a reasonable assessment of the rock slope stability has to include the excavation of the multi-failure modes, the consideration of uncertainties of discontinuity characteristics, and the decision on stabilization measures with favorable cost conditions. This study was performed to provide a new numerical model of the deterministic analysis, reliability analysis, and reliability-based optimization for rock slope stability. The sensitivity analysis was carried out to verify proposed method and developed program; the parameters needed for sensitivity analysis are design variables, the variability of discontinuity properties (orientation and strength of discontinuities), the loading conditions, and rock slope geometry properties. The design variables to be optimized by the reliability-based optimization include the cutting angle, the support pressure, and the slope direction. The variability in orientations and friction angle of discontinuities, which can not be considered in the deterministic analysis, has a greatly influenced on the rock slope stability. The stability of rock slopes considering three basic failure modes is more influenced by the selection of slope direction than any other design variables. When either plane or wedge failure is dominant, the support system is more useful than the excavation as a stabilization method. However, the excavation method is more suitable when toppling failure is dominant. The case study shows that the developed reliability-based optimization model can reasonably assess the stability of rock slopes and reduce the construction cost.

  • PDF

사면기호시스템을 이용한 사면의 평가 및 분류시스템 제안 (Evaluation and Classification System of Slope using the Slope Code System (SCS))

  • 장현식;김지혜;장보안
    • 지질공학
    • /
    • 제24권3호
    • /
    • pp.383-396
    • /
    • 2014
  • 사면붕괴에 따른 재해에 효과적으로 대응하기 위해서는 사면의 상태, 특성, 안정성과 사면붕괴시의 피해도에 대한 분석이 필요하다. 이 연구에서는 사면 관리에 필요한 다양한 항목을 포함하고 있는 사면기호시스템(Slope Code System, SCS)을 제안하고 있다. SCS는 사면의 상태, 지질특성, 공학적 안정성, 피해도 등을 평가하여 사면의 특성을 구체적으로 표현할 수 있으며, 평가방법도 비교적 쉽게 할 수 있다. SCS는 5가지의 평가 요소로 구성되어 있는데, '요소-1'은 사면의 구성물질을 나타내며, '요소-2'는 사면의 지질학적 특성을 성인에 따른 암종(rock type)과 지질구조로 나타낸다. '요소-3'은 사면의 공학적 안정성 평가하며, '요소-4'는 보호 보강 상태를 나타낸다. 마지막으로 '요소-5'는 사면붕괴 시 발생될 수 있는 피해의 정도를 나타낸다. SCS의 5가지 평가 요소들은 각각 평가 결과를 나타내는 고유한 분류 기호들을 가지고 있으며, 각 요소별 평가 결과로부터 부여된 5개의 기호들을 조합하여 사면의 종합적인 상태를 나타낸다. SCS는 사면의 상태, 특성, 공학적 안정성, 피해도 등을 종합적으로 평가하므로 사면의 유지관리에 효율적으로 사용될 수 있을 것으로 판단된다.

조도와 주로 변화가 노인 여성 보행 시 낙상 관련 운동역학적 위험요인에 미치는 영향 (Effects of Changes in Illumination Level and Slope on Fall-Related Biomechanical Risk Factors While Walking for Elderly Women)

  • 전현민;박상균
    • 한국운동역학회지
    • /
    • 제25권4호
    • /
    • pp.413-421
    • /
    • 2015
  • Objective : The purpose of this study was to investigate biomechanical changes of the lower limb including dynamic stability with changes in illumination (300Lx, 150Lx, and 5Lx) and slope (level and $15^{\circ}$ downhill) as risk factors for elderly falls. Method : Fifteen elderly females were selected for this study. Seven infrared cameras (Proreflex MCU 240: Qualisys, Sweden) and an instrumented treadmill (Bertec, USA) surrounded by illumination regulators and lights to change the levels of illumination were used to collect the data. A One-Way ANOVA with repeated measures using SPSS 12.0 was used to analyze statistical differences by the changes in illumination and slope. Statistical significance was set at ${\alpha}=.05$. Results : No differences in the joint movement of the lower limbs were found with changes in illumination (p>.05). The maximum plantar flexion movement of the ankle joints appeared to be greater at 5Lx compared to 300Lx during slope gait (p<.05). Additionally, maximum extension movement of the hip joints appeared to be greater at 5Lx and 150Lx compared to 300Lx during slope gait (p<.05). The maximum COM-COP angular velocity (direction to medial side of the body) of dynamic stability appeared to be smaller at 150Lx and 300Lx compared to 5Lx during level gait (p<.05). The minimum COM-COP angular velocity (direction to lateral side to the body) of dynamic stability appeared smaller at 150Lx compared to 5Lx during level gait (p<.05). Conclusion : In conclusion, elderly people use a stabilization strategy that reduces walk speed and dynamic stability as darkness increases. Therefore, the changes in illumination during gait induce the changes in gait mechanics which may increase the levels of biomechanical risk in elderly falls.

UAV 기반의 공간정보와 무한사면해석모형을 활용한 산사태 위험도 평가 (Landslide Hazard Evaluation using Geospatial Information based on UAV and Infinite Slope Stability Model)

  • 이근상;최연웅
    • 지적과 국토정보
    • /
    • 제45권2호
    • /
    • pp.161-173
    • /
    • 2015
  • 최근 기후변화에 따른 집중호우로 산사태 및 토석류가 발생하여 많은 인명 및 재산피해가 발생하고 있다. 본 연구에서는 UAV 측량기술을 활용하여 산사태 평가에 필요한 DSM과 정사영상을 신속하게 구축하였으며, 이를 무한사면해석모형에 적용하여 산사태 위험도를 평가하였다. 대상지역에 대한 산사태 위험도를 평가한 결과, 산사태 위험도 구간인 $SI{\leq}1.0$에서의 분포면적이 $46,396m^2$로 분석되었으며 분포비율로는 전체지역의 18.2%로 나타났다. 특히 산사태 발생이 매우 심각하여 사면보강 대책을 시급히 시행해야 되는 구간인 $SI{\leq}0.0$의 면적은 $7,988m^2$로서 전체지역의 0.8%를 차지하는 것으로 분석되었다. 또한 사면안정지수에 의한 산사태 위험도와 물골분석에 의한 토석류 위험도를 종합적으로 검토함으로써, 집중호우 시 산사태에 따른 토석류 위험지역을 선정할 수 있었다. 본 연구에서 분석한 산사태 및 토석류 위험지역은 향후 사면보강이나 주민안전대책 수립을 위한 의사결정 자료로 활용될 수 있을 것으로 판단된다.

터널 입구부 대절토 사면 안정성 사례 연구 (Case Study of the Stability of a Large Cut-Slope at a Tunnel Portal)

  • 박동순;배종섬
    • 지질공학
    • /
    • 제25권1호
    • /
    • pp.115-129
    • /
    • 2015
  • 대단면 터널 입구부의 대절토 사면은 불안정한 응력분포 및 소성변형 가능성으로 인해 잠재적 취약부로 인식되고 있다. 본 사례연구에는 대단면 터널 갱구부 대절토 사면의 강우 후 유실사고 및 원인규명, 복구공법을 분석하여 제시하였다. 대상 현장은 46 mm의 강우 후 암반의 불연속면을 따라 대규모 평면파괴가 발생하였으며, 상부 절토사면의 불안정을 야기하였다. 지질조사 및 매핑 자료 분석 결과, 붕괴 원인은 풍화된 암반의 불연속면에 협재된 충전물과 지반 포화로 인한 절리면 연화(softening)로 판단되었다. 알칼리 장석이 풍부한 화강편마암은 풍화에 취약한 것으로 나타났다. 침하량 계측자료 분석 결과, 붕괴 직전에 급격한 변위량 증가를 관찰하였으며, 향후 사면 계측관리에 활용할 수 있을 것으로 판단된다. 응급복구 대책으로 콘크리트 공동충전 및 외부로부터 압성토 채움을 성공적으로 시행하였다. 항구복구 대책으로 사면부에는 격자블럭 및 지중 앵커 시스템을, 터널 측벽부에는 추가 락볼트 보강 및 그라우팅 공법을 성공적으로 적용하였다. 한계평형해석과 평사투영해석을 통해 원 사면의 불안정성과 보강방법의 유효성을 확인하였다. 본 사례연구는 향후 유사한 대절토 사면에 귀중한 참고자료로 활용될 것으로 기대된다.

일차파괴된 암반사면의 전단강도 및 보강설계법 고찰 (A study on the determination of shear strength and the support design of pre-failed rock slope)

  • 조태진;김영호
    • 터널과지하공간
    • /
    • 제5권2호
    • /
    • pp.104-113
    • /
    • 1995
  • Shear strength of the discontinuity on which the pre-failure of rock slope was occurred during surface excavation was measured through the direct shear test using core samples obtained in-situ. Internal friction angle was increased as the roughness of discontinuity surface(JRC) was increased. Results of the tilt test using core samples of higher JRC also showed very similar trend as those of the direct shear test. When the samples replicated from natural cores were used int he tilt test, results of friction angles showed almost perfect continuation of the residual friction angles from the direct shear test. However, when the gouge material existed in the discontinuity the internal friction angle strongly depended upon the rate of filling thickness to the height of asperity irrespective of the JRC. Based on the results of both direct shear test and tilt test internal friction angle and cohesion of discontinuity, which reflect the in-situ conditions fo pre-sliding failure and also can be used for the optimum design of support system, were assessed. Two kinds of support measures which were expected to increase the stability of rock slope were considered; lowering of slope face angle and installation of rock cable. But, it was found that the first method might lead to more unstable conditions of rock slope when the cohesion of discontinuity plane was negligibly low and in that case the support systems of any kind which could exert actual resisting force were needed to ensure the permanent stability of rock slope.

  • PDF

석산개발 지역 퇴적장 석축사면의 안정성 해석 (Analysis of Slope Stability of Masonry Retaining Walls in Quarry)

  • 마호섭;이성재
    • 한국산림과학회지
    • /
    • 제107권4호
    • /
    • pp.385-392
    • /
    • 2018
  • 석산개발 지역 퇴적장 석축사면의 사면 조성 및 관리기술 증진을 위하여 현황측량을 실시하고, 대표단면을 선정하여 사면의 안정성 해석을 수행한 결과를 요약하면 다음과 같다. 사면안정 해석을 위하여 선정한 대표단면의 퇴적장 최하단부 사면(A) 경사는 $59^{\circ}$로서 급경사를 이루고 있으나, 전체 퇴적장 사면(A, B, C, D, E, F)의 평균경사는 $38.5^{\circ}$이었다. 퇴적장 사면의 수평거리는 총 66.2 m, 사면높이는 48.3 m이지만 퇴적장 석축사면의 경사는 비교적 급하며, 시각적으로도 불안정해 보인다. 사면안정 해석에는 건조시와 포화시를 고려하였으며 포화시의 사면안정 해석은 대상사면이 완전히 포화된 상태를 모델링하여 수행하였다. 지반의 강도정수는 석축과 배면지반으로 구분하고 안전성을 검토하였다. 건기시 안전율은 1.850, 우기시 안전율은 1.333으로 나타나 건기시 및 우기시의 안전율 1.5와 1.2를 상회하여 사면의 활동에 대하여 모두 안전한 것으로 나타났다. 그러나 집중호우 시 퇴적장 사면 상부의 풍화된 마사토는 사면침식과 붕괴 위험성이 높아 배수로 설치 등 적절한 유지관리를 통한 안정대책이 필요하다고 생각된다.

퇴적암 지역의 자연사면 안정성 (Stability of a Natural Slope in Sedimentary Rocks)

  • 권오일;김교원;박덕근
    • 지질공학
    • /
    • 제10권3호
    • /
    • pp.205-216
    • /
    • 2000
  • 이 연구는 집중호우 시에 심한 지표균열이 발생하여 주민의 안전이 우려되는 달성군 다사읍 이천리 배후 산록의 지반활동 원인을 조사하고 대책을 강구하는데 그 목적이 있다. 활동원인을 조사하기 위하여 지표 지질조사, GPR 탐사, 시추조사 및 시험, 강수자료 검토 등이 수행되었으며, 조사결과를 종합하여 활동면은 지하 6~8m 심도에 위치하는 사암과 셰일의 경계를 이루는 경사각 20~25$^{\circ}$의 층리면이 약선대로 작용한 것으로 확인되었다. 활동면의 전단강도는 한계평형해석법에 의한 역해석을 수행하여 지하수위가 상승한 경우에 안전율이 1.0 이하가 되는 값으로 내부마찰각 18$^{\circ}$, 점착력 0 kgf/$\textrm{cm}^2$으로 결정하였다. 이를 바탕으로 도해적 분석, 한계평형해석 및 수치해석 등 일련의 해석을 수행하였으며, 특히, 다양한 조건 하에서 한계평형해석을 수행하여 그 결과로부터 지반활동 방지를 위한 사면보강방안을 제시하였다. 적절한 표면 배수시설과 함께 지반 그라우팅 혹은 앵커공법의 적용이 사면의 장기적인 안전에 적절할 것이다.

  • PDF