• 터널과지하공간
• /
• 제16권6호
• /
• pp.451-466
• /
• 2006

DOM 시추코어에서 측정된 불연속면의 위치 및 방향성 자료를 이용하여 현장암반의 구조적 특성을 고려한 사면거동 해석이 가능하였다. 3차원 공간에서 설정된 절리들의 위치에 의거하여 붕락 현상이 발생된 개착사면의 추가적인 파괴양상을 예측하였으며, 개별 절리면의 붕락위해 가능성과 개착면 상에서의 trace 위치를 파악하여 세부적인 사면거동 양상을 파악하였다. 개착사면 횡단면에서 개별절리들의 파괴거동 양상과 사면체 블록형성을 대수학적으로 산출하여 사면 붕락심도를 규명하였다. 현장사면에 자동화 계측시스템을 설치하여 사면 거동에 대한 계측자료를 수집하였으며, DOM 시추공 내에 지중경사계를 설치하여 사면거동 양상을 횡단면 해석 결과와 대비시켜 분석하였다. 지중경사계를 이용하여 측정된 개착면의 표면변위 자료에 의거하여 사면 파괴시기를 예측할 수 있는 방법론을 고찰하였으며, 강우가 사면거동에 끼치는 영향성을 분석하였다.

• 한국지반신소재학회논문집
• /
• 제17권4호
• /
• pp.53-64
• /
• 2018

본 연구에서는 안정성과 위험도 평가의 중요성이 증대되고 있는 DCM(Deep Cement Mixing, 이하 DCM) 보강 지반상의 항만 구조물에 대하여 위험도 평가를 위한 파괴확률을 산정하였다. DCM 개량 지반의 위험도에 영향을 미치는 확률변수로 개량체의 설계기준강도와 시공중첩, 원지반의 강도 및 내부마찰각, 개량지반의 단위중량을 선정하고 관련 통계치를 산정하여 적용하였다. 또한, 상시 조건과 지진시 조건에서의 전체 시스템에 대한 파괴확률을 분석하였다. 본 연구를 통해 DCM 개량지반의 위험도 평가를 위한 확률변수에서 변동계수가 가장 큰 것은 설계기준강도이나 안전율의 변동성 즉, 시스템의 위험도에는 큰 영향을 미치지는 않는 것을 알 수 있었다. DCM 보강 지반에 대한 시스템의 파괴확률 영향인자 즉, 주된 위험요소는 상시 및 지진시 모두 외적안정의 경우 수평활동, 내적안정의 경우 압축파괴인 것으로 평가되었다. 또한, 수평활동에 대해서는 상시 파괴확률이 지진시 파괴확률보다 높고 압축파괴에 대해서는 상시 파괴확률이 지진시 파괴확률보다 낮은 것으로 나타났다. 전체 시스템의 상시 파괴확률과 지진시 파괴확률은 유사하지만, 본 사례의 경우 지진시 위험도가 다소 높은 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제23권3호
• /
• pp.293-308
• /
• 2006

This paper presents a complete and consistent formulation to study the seismic response of a free-standing ship supported by an arrangement of n keel blocks which are all located in a dry dock. It is considered that the foundation of the system is subjected to both horizontal and vertical in plane excitation. The motion of the system is classified in eight different modes which are Rest (relative), Sliding of keel blocks, Rocking of keel blocks, Sliding of the ship, Sliding of both keel blocks and the ship, Sliding and rocking of keel blocks, Rocking of keel blocks with sliding of the ship, and finally Sliding and rocking of keel blocks accompanied with sliding of the ship. For each mode of motion the governing equations are derived, and transition conditions between different modes are also defined. This formulation is based on a number of fundamental assumptions which are 2D idealization for motion of the system, considering keel blocks as the rigid ones and the ship as a massive rigid block too, allowing the similar motion for all keel blocks, and supposing frictional nature for transmitted forces between contacted parts. Also, the rocking of the ship is not likely to take place, and the complete ship separation from keel blocks or separation of keel blocks from the base is considered as one of the failure mode in the system. The formulation presented in this paper can be used in its entirety or in part, and they are suitable for investigation of generalized response using suitable analytical, or conducting a time-history sensitivity analysis.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.46-49
• /
• 2006

In general, the shear behavior mode of URM wall expresses four types of modes such as rocking failure, sliding shear failure, toe crushing failure, and diagonal tension failure. From the comparison of each equation according to the shear behavior modes, the failure modes based on the aspect ratio and vertical axial stress can be expected. The objectives of this study is to find out the shear behavior of URM wall with different aspect ratio. The test results show that the aspect ratio is understood as an important variable.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.196-202
• /
• 1998

Because the journal and bearing surface are fully separated by the oil film during the normal operation, fluid film bearings operating in the hydrodynamic lubrication region are expected to have an infinite life. However, there are many parameters that lead to interfere with the normal operation of the bearing and lead to its failure. In this paper, both the causes and countermeasures of the bearing failure are described. Also, the characteristics of wiped bearing surface are investigated through mechanical and chemical test.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.457-471
• /
• 2012

Current code procedures for stress and stability analysis of new and existing concrete-gravity dams are primarily based on conventional methods of analysis. Such methods can be applied in a straightforward manner but there has been evidence that they may be inaccurate or, possibly, not conservative. This paper presents finite element modeling and analysis procedures and makes recommendations for local failure criteria at the dam-rock interface aimed at predicting more accurately the behavior of dams under hydraulic and anchoring loads.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.508-518
• /
• 2008

Reliability and sensitivity analysis of the design parameters for a section of caisson type quaywall which is the most applicable in Korea were performed. It was tried to estimate probabilities of failure for the system of the multiple failure modes and to analyze LCC in the quaywall structure. The reliability analysis was performed by FORM. Also, sensitivity indices were estimated using the reliability indices, which may be used inferring effects of each design parameter on the reliability indices. As a result, the coefficient of friction between caisson and rubble, the moment by self weight and the moment of resistance mostly affected on the reliability indices in the sliding, overturning and foundation failure, respectively. System reliability theorem was applied in order to estimate the probabilities of failure for the system of the multiple failure modes. As the results of estimation of the probabilities of failure for the system, all cases were more conservative than those for the elements, according to both failure mode and load combination applied to series system. It entirely exceeded the target reliability index, but it was consistent with the theorem. According to the optimum LCC with the width of the caisson, the probability of failure exceeded the target probability of failure at then time. Therefore, it was judged to be insufficient to the practical application.

• 한국항해항만학회지
• /
• 제35권7호
• /
• pp.575-580
• /
• 2011

It is important to understand the trajectory of structure in launching process because of the short time of launching process may result in unexpected accidents or damage to structures. The high risk of structural failure is not avoidable without the fully comprehension of changing forces in launching procedure. The commercial software can evaluate the motion of launching event in calm water condition but there is the limitation of research application because of the programmed commercial software. The launching process of the spar hull is suggested with stage concept that is divided into 10 stages in time domain. A force equilibrium diagram is derived for each stage where the changes of force vector and motion characteristics take place. In particular, the effects of changes in buoyancy and drag force due to the progressive submergence of the spar hull are taken into account by means of a touch length concept. The results contained in this paper provide the valuable information of the trajectory motion evaluation with suggested methods in spar launching process with sliding barge. Furthermore, the presented stage concept and touch length concept will provide basic knowledge for understanding launching process and help to develop further research area for launching analysis.

• 한국재료학회지
• /
• 제4권3호
• /
• pp.334-338
• /
• 1994

Pb-Sn eutectic bulk specimens을 thermal cycling동안 electronic package의 땜납이 격게되는 변형 조건 즉 $10^{-3}-10^{-5}$/s정도의 낮은 frequency와 0.2-1%정도의 적당한 strain range에서 피로파괴 실험을 했을때, grain boundary sliding과 관련하여 임계면을 따라 일어나는 균열이 5단계에 의해 묘사될 수 있다는 것을 보였음.

• 한국지반환경공학회 논문집
• /
• 제12권8호
• /
• pp.25-31
• /
• 2011

최근 우기 시 집중호우로 인한 보강토 옹벽 및 비탈면의 붕괴는 빈번히 발생하고 있으며 더욱 인명사고로 이어지고 있다. 이에 본 논문에서는 집중호우로 인한 보강토 옹벽의 붕괴된 사례를 통해 보강토 옹벽의 균열 및 비탈면활동의 원인을 분석한 내용을 다루었고, 시공단계를 고려한 유한요소해석을 실시하여 비탈면의 파괴원인 분석 및 거동특성을 파악하였다. 연구결과 집중호우에 의한 보강토 옹벽의 변위는 증가하는 것으로 나타났으며, 그 증가폭도 큰 것으로 나타났다. 이와 같은 결과를 통해 말뚝 항타로 인해 보강토 옹벽의 붕괴에 일부 영향을 미칠 수 있는 것으로 분석되었다.