• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.4
• /
• pp.47-53
• /
• 2001

This study is to investigate the problem of the SPM(Skin Pass Mil7) system which is a finishing treatment of steel sheet. and to develop a PID control scheme to minimize process instability. An electrohydraulic servo system with conventional proportional controller used to regulate the force on the strip works inadequately to yield very undesirable transient responses at the moments welding parts of the strip conte into and pass through the rolls. Both linearized and nonlinear models of a typical SPM system ware simulated first by using Simulink. Then Ziegler-Nichols ultimate cycling method was used for an initial reference guide to tune PID gains, and further fine tuning was performed to get desirable response. The test result in the plant show that proposed PID control scheme successfully improves the process instability in a SPM system.

• Journal of Computational Design and Engineering
• /
• v.1 no.1
• /
• pp.1-12
• /
• 2014

In this paper, we propose a new method of reconstructing the hand models for individuals, which include the link structure models, the homologous skin surface models and the homologous tetrahedral mesh models in a reference posture. As for the link structure model, the local coordinate system related to each link consists of the joint rotation center and the axes of joint rotation, which can be estimated based on the trajectories of optimal markers on the relative skin surface region of the subject obtained from the motion capture system. The skin surface model is defined as a three-dimensional triangular mesh, obtained by deforming a template mesh so as to fit the landmark vertices to the relative marker positions obtained motion capture system. In this process, anatomical dimensions for the subject, manually measured by a caliper, are also used as the deformation constraints.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.47-51
• /
• 2006

As the recent announcement of the functional cosmetics law, the need of studies on efficacy evaluation of skin related cosmetics and medical supplies has grown. Especially to identify skin improvement, we have to compare the exact parts of the skin, however up to now it is compared only by image matching that is appeared to the human eye. This study proposes the automatical image matching system for improving the accuracy of evaluation a skin improvement. Firstly we define the feature of the skin pores and wrinkles, and extract anticipation region from skin images. And then, we calculate moments for each extracted regions and classify them as pores and wrinkles. After that, we calculate the vector by computing centroids between each regions. Through this process, we compare the vector similarities and perform the matching between existing image and reference image. To verify the efficiency of the algorithm several experiments are conducted.

• The Journal of Korean Medicine
• /
• v.38 no.4
• /
• pp.55-61
• /
• 2017

Objectives: In order to accurately measure skin moisture and accumulate normal skin moisture data, analyzing the uncertainty of the skin moisture measurement and establishing standard reference data is essential. It helps to evaluate the skin's condition and has great significance in diagnosis and treatment. In this study, the traceability of the equipment and the uncertainty of the results were analyzed for their potential use in the field of Korean medicine. The data was collected measuring skin moisture on the sole of the foot. Methods: One professional measured the moisture of the adult male's foot 10 times following a determined protocol. The standard uncertainty of repeated measurements was calculated from the mean value of 10 repeated measurements. Ten trainee participants also measured the adult male's foot following a determined protocol. The standard uncertainty by tester was calculated from the value of repeated measurements. Results: As a result of analyzing the difference between the mean and standard uncertainties in both the expert and trainees, it was confirmed that the variance in this study did not satisfy the normal distribution. In addition, the Mann-Whitney U-test was carried out, and it was found that there was no significant difference in the measured values of the two groups. The authorized uncertainty of measurements and traceability of all the equipment was not confirmed. Conclusions: This paper establishes the basis for later measurement-equipment research to provide the objective indicators to approach the dryness of plantar skin from dehydration, the Korean medicine perspective.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.3
• /
• pp.231-238
• /
• 2018

The facial skin condition expresses physical healthy as well as is considered one of important factors for attractiveness. Especially, most people prefer shiny skin. So various cosmetics has been manufactured for expression of shiny skin. However, shiny skin is subjectively evaluated, and difficult to evaluate clear shininess using the existing method in oily skin. Moreover, there is no clear classification criteria between shininess and glossiness, which is assessed negatively in the skin. So there has not been a reference value by mechanical measurement to define and classify shiny skin from greasy skin. In this study, we measured skin biophysical parameters (gloss, hydration, translucency and sebum) and facial images which are selected by volunteers using sensory evaluation. According to the measurement results, the values of gloss, sebum, and translucency were similar in both shiny and greasy skin; the values of sebum and gloss increased, whereas those of translucency decreased. However only skin moisture values statistically increased in shiny skin. In conclusion, we propose objective assessment criteria for classifying shiny and greasy skin using device measurement and quantitative assessment.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.3
• /
• pp.8-17
• /
• 2015

In this research, low fidelity air/heat load analysis was conducted for the intake of high speed vehicle. For air/heat load calculations, aerodynamic properties at the surface and the boundary layer edge were estimated using Taylor-Maccoll equation for conical flow, shockwave relation and Prandtl-Meyer expansion equation for internal and external flow. Couette flow assumption and Reynolds analogy were used in order to calculate convective heat transfer coefficient. In order to calculate skin friction coefficient for heat transfer coefficient analysis, Van Driest method II and Reference Enthalpy method were considered. An axis symmetric SCRAMJET model was selected as a reference configuration for verifying the proper implementation of the present method. Comparison of the results using the present method and Computational Fluid Dynamic analysis showed that the present method is valuable for efficiently providing pressure and heat loads for air-intake structure design of the high speed air vehicle.

• YAKHAK HOEJI
• /
• v.38 no.5
• /
• pp.483-487
• /
• 1994

The pharmacokinetic characteristics of an 1% flurbiprofen gel were evaluated using rats in reference to IV bolus and oral administration of the drug using rats. Following the transdermal application of the gel at the dose of 2 mg/kg as flurbiprofen, the $C_{max}$ and $T_{max}$ of the drug were $2.14\;{\mu}g/ml$ and 2 hr, respectively, whereas those after the oral administration of the drug as a suspension were $9.90\;{\mu}g/ml$ and 0.25 hr, respectively. These results indicate that, by the transdermal administration fo flubiprofen as the gel, the absorption of the drug was much slowed down and the lower $C_{max}$ compared to the oral administration may reduce the systemic side effects of the drug. The relative bioavailability of the flurbiprofen gel in reference to the oral dose was 48.5%. Tissue levels of flurbiprofen following the application of 50 mg of the 1% flurbiprofen gel onto ventral skin of rats showed that the maximum drug concentrations in the skin $(8.52\;{\mu}g/g)$ and the muscle $(2.06\;{\mu}g/g)$ occurred at 2 hrs postdose. The drug concentration in the both tissues remained relatively constant over the next 6 hrs following the peak concentration.

• Journal of Veterinary Clinics
• /
• v.34 no.4
• /
• pp.249-254
• /
• 2017

The cutaneous microcirculation plays a role in various physiological processes and pathological conditions. Two non-invasive methods were used in this study to obtain reference values for cutaneous microcirculation in intact male beagles. Twenty intact male beagles were used. The experimental environments were standardized. Laser Doppler flowmetry was used to measure cutaneous blood flow, and an infrared thermometer was used to measure cutaneous temperature. The blood flow and temperature were measured from the right side of the subjects at 20 cutaneous sites. Based on the laser Doppler flowmetry, the region with the highest blood flow was the periocular region that with the lowest was the forelimb foot pad. In addition, the standard deviation of the chest wall was the highest while that of the periocular region was the lowest. For skin temperature, the inguinal region had the highest mean skin temperature and the forelimb foot pad had the lowest. The correlation coefficient between the two methods was 0.72. Similar to a previous study, the values derived from repeated measurements at the 20 regions are reproducible and can contribute to research. Compared to the results of a previous study, the temperatures of the two smallest skin regions were the same; however, no specific trend was observed. The correlation coefficient between the two methods was significantly comparable, and this good correlation can reduce their limitations and variables complementarily. In addition to possible use in human studies, accumulated resources on measurements of skin blood flow in the future will potentiate its use in the veterinary medicine field.

• The Journal of the Convergence on Culture Technology
• /
• v.3 no.1
• /
• pp.43-48
• /
• 2017

We are confirmed to the variation of the transfer condition and the functional penetration by the permitted conversion energy on the skin. The given conversion energy is consist of the flow level of penetration control and go to the processing transfer in the skin that is to create the modeling for algorithm. The energy level of control processing was achieved effectively modeling system that was the composition of auto and local control level in the epidermis-dermis layer. Their penetration pulse control system was consisted of conversion energy with reference of fixing situation and recreation of designed apparatus for the energy control function that was converted to capacity by the size, form and combination. Also, the system was shown accurately distribution of conversion at the depth of skin correction. Therefore, conversion modeling was established effectively to separate the division parts for conversion system. We will be possible to progress the improvement effectiveness of the skin and to consist of the continuous penetration control system for functional energy on the skin.

• Journal of Applied Biological Chemistry
• /
• v.66
• /
• pp.359-368
• /
• 2023

This study aims to explore the impact of Krill Oil (KO, Superba^TM Boost) on skin moisturization regulation. The research involved five groups: an intact control, a reference group (L-AA 100 mg/kg), and KO groups (400, 200, and 100 mg/kg), each comprising ten mice. Oral administration was conducted for 8 weeks (56 days), during which changes in body weight, hyaluronan, collagen type 1 (COL1), transforming growth factor-β1 (TGF-β1), ceramide, and water contents were analyzed in dorsal back skin tissue. Real-time PCR was employed to assess gene expression related to hyaluronic acid synthesis (HAS1, HAS2, HAS3), COL1 synthesis (COL1A1 and COL1A2), and TGF-β1. Results demonstrated that KO administration significantly increased hyaluronan content, hyaluronic acid synthesis (HAS1, HAS2, HAS3), COL1 content, COL1 synthesis (COL1A1 and COL1A2), TGF-β1 content, TGF-β1 mRNA expression, ceramide content, and water content in a concentration-dependent manner compared to the intact control. Importantly, no discernible disparities were noted between the KO and L-AA groups, even though they received equivalent oral dosages. This study accentuates the potential utility of exogenous KO in the regulation of skin moisture, thus positioning it as a promising avenue for the development of nutricosmetics. Future research endeavors should delve into the role of KO in safeguarding against both intrinsic and extrinsic aging-related skin manifestations, as well as its potential to ameliorate skin wrinkles, in conjunction with its moisturizing attributes.