• Journal of Institute of Convergence Technology
• /
• v.1 no.2
• /
• pp.16-24
• /
• 2011

The angular electrostatic microactuator using skewed electrode array (SEA) scheme was proposed. The moving and fixed electrodes are arranged to make the driving force perpendicular to the rotating moment of arm. By changing the electrode overlap length, the magnitude of electrostatic force and stable displacement will be changed. In order to optimize the design, electrostatic FE analysis were carried out and the empirical force model was established for SEA. Simulation was performed to make the comparison between conventional actuators and SEA. The proposed SEA generates actuating torque 2 times greater than a comb-drive and stable actuator displacement 40% greater than a parallel plate type actuator. The angular electrostatic microactuator using skewed SEA scheme was designed and fabricated using SoG process.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1337-1345
• /
• 2000

In spite of the advantages of lightweight, low profile, and mass productions, microstrip array antenna has inherently the scan blindness problems in case of wide angle scan. And this scan blindness can be overcome by using cavity-backed microstrip radiator. In this paper, we presented the algorithm of analyzing skewed cavity-backed microstrip array and verified the validity of the proposed numerical results with those of reference papers. Finally, we show the effect of cavity-backed and skewed grid array structure.

• Journal of Institute of Convergence Technology
• /
• v.1 no.2
• /
• pp.6-15
• /
• 2011

This paper reports the design and fabrication of a micro-electro-mechanical-system(MEMS)-based electrostatic angular microactuator for a dual-stage servo. The proposed actuator employs a novel electrode pattern named "skewed electrode array(SEA)" scheme. It is shown that SEA has better linearity than a parallel plate type actuator and stronger force than a comb-drive based actuator. The moving and the fixed electrodes are arranged to make the driving force perpendicular to the rotating moment of arm. By changing the electrode overlap length, the magnitude of electrostatic force and stable displacement will be changed. In order to optimize the design, an electrostatic FE analysis was carried out and an empirical force model was established for SEA. A new assembly method which will allow the active electrodes to be located beneath the slider was developed. The active electrodes are connected by inner and outer rings lifted on the base substrate, and the inner and outer rings are connected to platform on which the slider locates. Electrostatic force between active electrodes and platform can be used for exiting out of plane modes, so this provides the possibility of the flying height control. A microactuator that can position the pico-slider over ${\pm}0.5{\mu}m$ using under 20 volts for a 2 kHz fine-tracking servo was designed and fabricated using SoG process.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.181-188
• /
• 2004

Structural analysis for materials containing regularly spaced in-homogeneities is usually executed by using averaged material properties. For the homogenization process, a unit cell is defined and loaded somehow, and its response is investigated to evaluate the properties. The imposed loading conditions should accord to the behavior of unit cell immersed in the macroscopic structure in order to guarantee the accuracy of the effective properties. Each unit cell shows periodic variation of strain if the material is loaded uniformly, and in this study, direct implementation of this characteristic behavior is attempted on FE models of unit cell. Conventional finite element analysis tool can be used without any modification, and the boundary of unit cell is constrained in a way that the periodicity is satisfied. The proposed method is applicable to skew arrayed in-homogeneity problems. The flexibility matrix relating tonsorial stress and strain components in skewed rectilinear coordinate system is transformed so that the required engineering constants can be evaluated. Effective properties are computed for the materials with square and skew arrayed circular holes, and its accuracy is examined.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1950-1957
• /
• 2004

Analysis for structures composed of materials containing regularly spaced in-homogeneities is usually executed by using averaged material properties. In order to evaluate the effective properties, a unit cell is defined and loaded somehow, and its response is investigated. The imposed loading, however, should accord to the status of unit cells immersed in the macroscopic structure to secure the accuracy of the properties. In this study, mathematical description for the periodicity of the displacement field is derived and its direct implementation into FE models of unit cell is attempted. Conventional finite element code needs no modification, and only the boundary of unit cell should be constrained in a way that the periodicity is preserved. The proposed method is applicable to skew arrayed in-homogeneity problems. Homogenized in-plane elastic properties are evaluated for a few representative cases and the accuracy is examined.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.12
• /
• pp.10-18
• /
• 1997

The parallel trabutary signals in the SDH-based transmission system have the frame phase skew due to uneven transmission delays in the data and the clock path. This phase skew must be eliminated prior to synchronously multiplexing process. A new twenty-four channel, 51.84Mb/s DFPA(Digital Frame Phase Aligner) has been designed and fabricated in 0.8.mu.m CMOS gate array. This unique device phase-aligns the skewed input signals with refernce frame synchronous signal and reference clok for subsequent synchronous multiplexing process. the performance of fabricated device is evaluated by the STM-16 transmission system and DS-3 meansurement set. The frame phase margin of +2/-3 bit periods has been demonstrated.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.19-28
• /
• 2004

This paper shows how to compensate the skew from the traffic sign included in the natural image and extract the text. The research deals with the Process related to the array image. Ail the process comprises four steps. In the first fart we Perform the preprocessing and Canny edge extraction for the edge in the natural image. In the second pan we perform preprocessing and postprocessing for Hough Transform in order to extract the skewed angle. In the third part we remove the noise images and the complex lines, and then extract the candidate region using the features of the text. In the last part after performing the local binarization in the extracted candidate region, we demonstrate the text extraction by using the differences of the features which appeared between the tett and the non-text in order to select the unnecessary non-text. After carrying out an experiment with the natural image of 100 Pieces that includes the traffic sign. The research indicates a 82.54 percent extraction of the text and a 79.69 percent accuracy of the extraction, and this improved more accurate text extraction in comparison with the existing works such as the method using RLS(Run Length Smoothing) or Fourier Transform. Also this research shows a 94.5 percent extraction in respect of the extraction on the skewed angle. That improved a 26 percent, compared with the way used only Hough Transform. The research is applied to giving the information of the location regarding the walking aid system for the blind or the operation of a driverless vehicle

• Journal of Periodontal and Implant Science
• /
• v.31 no.4
• /
• pp.661-668
• /
• 2001

Anti-P. gingivalis immune sera were obtained from mice immunized with either P. gingivalis alone, or F. nucleaturm followed by P. gingivalis. Two groups of immune sera were examined for binding capacity to P. gingivalis biofilm by confocal laser scanning microscope, Antibody avidity index was also determined for each immune sera. The results indicated that prior immunization of mice with F. nucleaturm impaired P. gingivalis-specific immune sera in binding capacity to biofilm and antibody avidity to P. gingivalis. Elevated antibody responses in patients with destructive periodontal disease has often been related to suboptimal level of protective antibody $(opsonophagocytosis)^{1-3)}$ while post-immune sera obtained with experimental animals using a single periodontal pathogen demonstrated satisfactory levels of protective function against the homologous bacterial $challenge^{4,5)}$.The reason is unclear why elevated IgG responses in periodontal patients to periodontal pathogens do not necessarily reflect their protective function. Such an immune deviation might be derived from the fact that destructive periodontal disease is cumulative result of immunopathologic processes responding to an array of different colonizing microorganisms sequentially infecting in the subgingival environmental niche. Fusobacterium nucleaturm is one of the key pathogens in gingivitis, in the transitional phase of conversion of gingivitis into destructive periodontitk, and in adult $periodontitis^{6-8)}$. It also plays a central role in coaggregation with other important microbial species in subgingival $area^{6,9,10)}$ as well as in $biofilm^{11)}$, especially with Porphyromonas gingjvalis in synergism of virulence in human periodontal disease or in animal $models^{12-14)}$. This organism has also been reported to have immune modulating activity for secondary immune response to Actinobacillus $actinomycetemcomitans^{15)}$. It is presumed that sequential colonization and intermicrobial coaggregation between intermediate and late colonizers could potentially modulate the immune responses and development of specific T cell phenotypes in periodontal lesions. We have recently demonstrated the skewed polarization of P. gingivalis-specific helper T cell clones in mice immunized with F. nucleaturm followed by P. $gingivalis.^{16)}$. Consequently F. nucleaturm may initially prime the immune cells and modify their responses to the successive organism, P. gingivalis. This could explain why one frequently observes non-protective serum antibodies to P. gingivalis in periodontal patients in contrast with those obtained from animals that were immunized with $P.gingivalis\;alone^{17)}$. The present study was performed to investigate the immune modulating effect of F. nucleatum on serum binding to experimental biofilms and the avidity of anti-P. gingivalis antibody.