• 대한조선학회지
• /
• 제17권3호
• /
• pp.5-17
• /
• 1980

A basic procedure to design marine propellers by a curved lifting line theory was shown. By adapting discrete singularity method, it became possible to take into account of skew, rake and the contraction of slip stream in the early stage of preliminary design procedure. It is also shown that lifting line theory based on the discrete singularity method converges to a common solution obtained by induction factor method with a relatively small number of discrete elements. Lifting the blade geometry more accurately on the basis of hydrodynamic principles. A number of numerical results from lifting line calculation are presented for the purpose of comparison with the previous method, and with these results two sample designs are carried out, which are wake-adapted optimum and wake-adapted non-optimum propellers.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.31-34
• /
• 2003

In this paper, we describe a method for separating text lines in handwritten Korean address images. The most remarkable feature of the proposed method is to use a modified projection technique. named a partial projection technique. A projection based text line separation method which projects the whole address image in horizontal direction to find split points for text line separation cannot avoid failing separation in case of images with a little skew or overlap between vertically neighboring text lines. To overcome this problem, we have introduced a partial projection technique which splits an address image into a few partial address images to be equal width and then project them each horizontally. The experiment done with 989 handwritten Korean address images extracted from live mails shows the superiority of the proposed method. The correct text-line separation rate fir the testing images was about 91.5％.

• Tribology and Lubricants
• /
• 제8권2호
• /
• pp.26-34
• /
• 1992

This paper suggests a method to predict the flying state of the head slider in a hard disk drive (HDD) by using an optimization technique. The modified Reynolds equation for the hydrodynamic lubrication theory under the slip flow condition is used to describe the air-bearing system and a Finite Volume Method (FVM) is applied to solve the equation. Especially, Augmented Lagrange Multiplier (ALM) method is employed to find the minimum flying height, the pitch angle and the roll angle of the slider, which is shown to be faster and more general than the conventional update schemes. By using the proposed method, the variations of the flying state are analyzed as a function of the slider position in the direction of the disk radius for various disk velocities and skew angles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.91-95
• /
• 1991

In this paper, the characteristics of IPMSM(Interior-type Permanent Magnet Synchronous Motor) are simulated using 2-Dimensional finite element method. This paper deals with the following characteristics: Air gap flux density considering skew. Back E.M.F, Torque and Inductance. Torque is calculated using current angle which is known from the controller. Direct axis inductance and Quadrature axis inductance are also calculated using energy perturbation method. This results can be used for the computation of the saliency of IPMSM. Computed results are found in satisfactory agreement with experimental ones.

• Journal of the Korean Statistical Society
• /
• 제35권4호
• /
• pp.419-439
• /
• 2006

The article develops a new class of distributions by introducing a nonnegative perturbing function to $t_\nu$ distribution having location and scale parameters. The class is obtained by using transformations and conditioning. The class strictly includes $t_\nu$ and $skew-t_\nu$ distributions. It provides yet other models useful for selection modeling and robustness analysis. Analytic forms of the densities are obtained and distributional properties are studied. These developments are followed by an easy method for estimating the distribution by using Markov chain Monte Carlo. It is shown that the method is straightforward to specify distribution ally and to implement computationally, with output readily adopted for constructing required criterion. The method is illustrated by using a simulation study.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.459-462
• /
• 2003

Selectivity estimation of queries not only provides useful information to the query processing optimization but also may give users with a preview of processing results. In this paper, we investigate the problem of selectivity estimation in the context of a spatial dataset. Although several techniques have been proposed in the literature to estimate spatial query result sizes, most of those techniques still have some drawback in the case that a large amount of memory is required to retain accurate selectivity. To eliminate the drawback of estimation techniques in previous works, we propose a new method called MW Histogram. Our method is based on two techniques: (a) MinSkew partitioning algorithm that processes skewed spatial datasets efficiently (b) Wavelet transformation which compression effect is proven. We evaluate our method via real datasets. With the experimental result, we prove that the MW Histogram has the ability of providing estimates with low relative error and retaining the similar estimates even if memory space is small.

• 산업기술연구
• /
• 제15권
• /
• pp.203-208
• /
• 1995

This paper suggests the three dimensional steady state searching techniques of hard disk/head system, which has some skew angle with flexure. In order to analyze the steady state behaviors of magnetic head slider, the localized Knudsen number and the localized bearing numbers are sued. For finding the steady state of magnetic head slider under the pre-loaded condition, I proposed multi-dimensional Newton-Raphson method which traces the equilibrium position of magnetic head slider, which has 3-degrees of freedom, using Jacobian matrix. The multi-dimensional Newton-Raphson method is very efficient technique for finding the steady state position of magnetic head slider because it approaches to the equilibrium position with changing three parameters simultaneously.

• Journal of applied mathematics & informatics
• /
• 제38권5_6호
• /
• pp.489-506
• /
• 2020

The spatial fractional diffusion equation can be discretized by employing the implicit finite difference scheme using the shifted Grünwald formula. The discretized linear system is obtained, whose the coefficient matrix has a diagonal-plus-Toeplitz structure. In order to solve the diagonal-plus-Toeplitz linear system, on the basis of circulant and skew-circulant splitting (CSCS splitting), we construct a new and efficient iterative method, called DSCS iterative methods, which have two parameters. Than we prove the convergence of DSCS methods. As a focus, we derive the simple and effective values of two optimal parameters under some restrictions. Some numerical experiments are carried out to illustrate the validity and accuracy of the new methods.

• 대한전기학회논문지
• /
• 제40권7호
• /
• pp.643-655
• /
• 1991

The analysis method on air gap permeance distribution, air gap MMF distribution, air gap flux density distribution, cogging torque and BEMF about the skewed stator slots or the skewed rotor magnet segments for BLDCM, respectively, is studied as a function of the skew ratio. The proposed method describes the differences between the skewed stator slots and teh skewed rotor magnet segments for the air gap permeance distribution, air gap MMF distribution and air gap flux density distribution. The reliability of the method is also confirmed by the waveform of the cogging torque and BEMF through experiments. And the result shows that the effects on the cogging torque and BEMF due to the skewed stator slots or the skewed rotor magnet segments are the same. In case of the skewed stator slots, the effects of the variations of the winding resistance and inductance are also studied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.49-51
• /
• 1996

The z-transform method is a basic mathematical tool in analyzing and designing sampled-data control systems. However, since the z-transform method relates only the sampling-instants signals, another mathematical tool is necessary to describe the continous signals between the sampling instants. For this purpose the delayed and the modi fled z-transform methods were developed. The definition of the modi fled z-transform includes a sample in the interval [-T,0] of the original signal in its series expression, where the signal value is always zero for any physical system. From this reason one step skew of the time index always appears in its application formulas. This introduces an unnecessary operation and a gap in linking the mathematical formula and its physical interpretation. Considering the conceptual difficulty and application inconvenience, a method of using the advanced z-transform in analysis of sampled-data control systems is developed as a replacement of the modi fled z-transform. With one formulation of the advanced z-transform, now it is possible to relate both the signals of the sampling instants and those in between without any complication and conceptual difficulty.