• 자원리싸이클링
• /
• 제11권1호
• /
• pp.9-18
• /
• 2002

폐 컴퓨터 기판(Printed Wiring Boards, PWBs)은 다양한 종류의 금속 및 합금류, 각종의 유기 및 무기화합물 등으로 구성되어 있다. 따라서 폐 기판에 포함된 유가물을 경제적인 방법으로 분리 회수하면 2차 자원으로써 활용가치가 매우 클 것으로 판단되어, 물리적인 선별기술에 의하여 유가금속을 분리 회수하는 데에 따른 특성 연구를 행하였다. 본 연구에는 폐 컴퓨터 기판에 탑재된 소켓류와 칩류를 탈리한 다음 소켓류, 칩류 및 보드류로 분리하여 각각의 산출물의 특성에 따른 적절한 물리적 분리선별 기술을 적용하였다. 소켓류를 파쇄하여 입자크기를 -2.36 mm/+1.18 mm 범위로 조절한 다음 건식 자력선별을 실시하였을 때, 자성산물의 약 97 wt%가 금속류였다. 칩류의 경우에는 -2.36 mm1+0.15 nun의 크기로 분쇄하고 공기분급 및 건 식 자력선별을 행하여 Fe-Ni 97%, Cu 95%를 각각 회수할 수 있었다. 보드류의 경우에는 금속류가 얇게 프린트 된 상태이기 때문에 가능한 단체분리 효과를 향상시키기 위하여 ball mill로 분쇄하였으며, 공기 분급기에 의한 정밀 분급을 행하여 Cu 77%를 회수할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.687-693
• /
• 2004

Composite membranes with a titania layer were prepared by soaking-rolling method with the titania sol of nanoparticles formed in the sol-gel process and investigated regarding the vapor permeation of various organic mixtures. The support modification was conducted by pressing $SiO_2$ xerogel of 500 nm in particle size under 10 MPa on the surface of a porous stainless steel (SUS) substrate and designed the multi-layered structure by coating the intermediate layer of ${\gamma}-Al_2O_3$. Microstructure of titania membrane was affected by heat-treatment and synthesis conditions of precursor sol, and titania formed at calcination temperature of 300$^{\circ}C$ with sol of [$H^+$]/[TIP]=0.3 possessed surface area of 210 $m^2$/g, average pore size of 1.25 nm. The titania composite membrane showed high $H_2/N_2$ selectivity and water/ethanol selectivity as 25-30 and 50-100, respectively. As a result of vapor permeation for water-alcohol and alcohol-alcohol mixture, titania composite membrane showed water-permselective and molecular-sieve permeation behavior. However, water/methanol selectivity of the membrane was very low because of chemical affinity of permeants for the membrane by similar physicochemical properties of water and methanol.

• 한국염색가공학회지
• /
• 제15권4호
• /
• pp.57-64
• /
• 2003

Poly(ethylene-co-vinyl acetate)(EVA) microspheres were prepared by a thermally induced phase separation. The microsphere formation occurred by the nucleation and growth mechanism in the metastable region. The diluent used was toluene. The microsphere formation and growth was followed by the cloud point of the optical microscope measurement. The microsphere size distribution, which was obtained by SEM observation and particle size analyzer, became broader when the polymer concentration was higher, the content of vinyl acetate in EVA copolymer was higher, and the cooling rate of EVA copolymer solution was lower.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 춘계 종합학술대회 논문집
• /
• pp.369-373
• /
• 2005

본 논문은 기존의 주파수 영역 독립 성분 분석(FDICA : frequency domain independent component analysis) 방법에 가변 적응 상수를 이용한 알고리즘을 제안한다. 여러 반향 환경에 대한 모의실험으로 기존의 temporal structure(TA)알고리즘, FDICA알고리즘과 비교하여 그 분리 성능을 평가하고 비교한다. 실제 녹음한 혼합 음원에 대한 분리정도를 비교 분석한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권3호
• /
• pp.13-17
• /
• 2023

Magnetic separation technology for small paramagnetic particles has been desired for the volume reduction of contaminated soil from the Fukushima nuclear power plant accident and for the separation of scale and crud from nuclear power plants. However, the magnetic separation for paramagnetic particles requires a superconducting high gradient magnetic separation system applied, hence expanding the bore diameter of the magnets is necessary for mass processing and the initial and running costs would be enormous. The use of high magnetic fields makes safe onsite operation difficult, and there is an industrial need to increase the magnetic separation efficiency for paramagnetic particles in as low a magnetic field as possible. Therefore, we have been developing a magnetic separation system combined with a selection tube, which can separate small paramagnetic particles in a low magnetic field. In the previous technique we developed, a certain range of particle size was classified, and the classified particles were captured by magnetic separation. In this new approach, the fluid control method has been improved in order to the selectively classify particles of various diameters by using a multi-stage selection tube. The soil classification using a multi-stage selection tube was studied by calculation and experiment, and good results were obtained. In this paper, we report the effectiveness of the multi-stage selection tube was examined.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권5호
• /
• pp.46-55
• /
• 2013

The main objective was to evaluate the efficiencies of different separation techniques, such as gravity separation, magnetic separation, and aerial separation. Zinc and cadmium removal efficiencies by gravity separation and magnetic separation were 28.3~29.3% and 19.1%, respectively, and were higher than the efficiency obtained by aerial separation. Results showed that the combination of gravity separation and magnetic separation in series which was to maximize the removal efficiencies gave removal efficiency of 21.5~38.7% for zinc and 22.1~23.4% for cadmium. The mass of soil meeting the regulation standards for zinc and cadmium after retrieval from the combined separation process accounted for approximately 80% of the treated soil that would be reusable without the pre-treatment procedure as the neutralization process using in the soil washing method. Physical separation techniques utilizing heavy metal properties are the alternative method to remediate heavy-metal contaminated soils in environmental and economic aspects.

• 지질공학
• /
• 제32권2호
• /
• pp.241-255
• /
• 2022

본 연구에서는 예천지역의 화강풍화토에 대하여 KS F 2302의 체 분석 방법과 규정에 준하여 체분석 시험을 수행하고, 물 세척시 발생되는 흙의 입자분리와 입도분포 변화의 특성을 비교 분석하였다. 광학현미경에 의한 영상이미지 분석결과 흙입자가 물에 의해 더 작은 입자로 분리됨을 확인하였고 입도분포곡선의 변화를 5가지 지표값으로 산출한 결과 세립분(0.075 mm)의 증가량은 13.67%, 임의 입경(0.25 mm)의 증가량은 19.44%, 입도분포곡선의 최대통과율폭(B_M)은 #30 체에서 21.08%가 증가되었고 입도분포곡선의 이동면적(A)은 69.28%·mm로 분석되었으며 평균입경(D₅₀)은 0.663 mm가 감소되었다. 이러한 결과는 물 세척을 수행하는 것이 세립토의 함량이 실제보다 과소평가 되는 것을 막을 수 있는 효과적인 방법임을 의미한다.

• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1315-1320
• /
• 2011

Whey protein (WP) is a mixture of proteins, and is of high nutritional values. WP has become an important source of functional ingredients in various health-promoting foods. In this study, size-exclusion chromatography (SEC) and asymmetrical flow field-flow fractionation (AsFlFFF) were used for separation and analysis of whey proteins. It was found that a lab-prepared WP from raw milk is mostly of ${\beta}$-lactoglobulin with small amount of higher molecular weight components, while a commercial whey protein isolate (WPI) powder contains relatively larger amount of components other than ${\beta}$-lactoglobulin, including IgG and protein aggregates. Results suggest that AsFlFFF provides higher resolution for the major whey proteins than SEC in their normal operation conditions. AsFlFFF could differentiate the BSA and Albumin, despite a small difference in their molecular weights, and also was able to separate much smaller amount of aggregates from monomers. It is noted that SEC was able to show the presence of low molecular weight components other than the major whey proteins in the WP samples, which AsFlFFF could not show, probably due to the partial loss of those low molecular weight species through the membrane.

• Mass Spectrometry Letters
• /
• 제2권3호
• /
• pp.65-68
• /
• 2011

The effects of column length and particle size on the efficiency of separation and characterization of phospholipids (PLs) are investigated using nanoflow liquid chromatography-electrospray ionization-tandem mass spectrometry (nLC-ESI-MS-MS). Since PLs are associated with cell proliferation, apoptosis, and signal transduction, it is of increasing interests in lipidomics to establish reliable analytical methods for the qualitative and quantitative profiling of PLs related to biomarker development in adult diseases. Due to the complexity of PLs, the preliminary separation of PLs is necessary prior to MS analysis. In this study, length of capillary column and the particle size of reversed phase ($C_{18}$) packing materials are varied to find a reliable condition for the high speed and high resolution separation using 8 PL standard mixtures. From experiments, it was found that a capillary column of nLC-ESI-MS-MS analysis for PL mixtures can be minimized to a 5 cm long pulled tip column packed with 3 ${\mu}m$ $C_{18}$ particles without losing resolution.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.966-978
• /
• 1993

A power operated 90.5 hp electric motor) grain flour separator was designed and developed for separation of grain (wheat, corn, chickpea and soybean) flour into various fractions based on the size of the particles of the product. The separator agitating mechanism, feed control, cylindrical separator unit and an eccentric mechanism. The machine was tested for wheat ( variety ; Sujata) flour separation into four fractions, viz ; semolina, Gr-I and II, flour (coarse) and white (fine) flour. Wheat samples (6.8% m.c., db) were first pearled by CIAE pearler for 15.8% bran removal . The pearled wheat grains were then milled for semolina by a burre mill. The product and machine characteristics were determined at different capacities varying from 24 kg/h to 143 kg/h. It was found that 76 kg/h capacity gave reasonably best results in terms of purity and recovery of semolina vis-a-vis the market product. The energy requirement of the machine at no-load was found to be 230 W and at load c nditions, it varied between 36.3-6.4 KJ per kg of fead seperation. The macine could be used by small flour millers small/medium size traders and retailers and other processors for making available various flour products of different particle size in the market for ready use of the consumers.