• Structural Engineering and Mechanics
• /
• v.62 no.5
• /
• pp.537-550
• /
• 2017

Structural sizing is a rewarding task due to its non-convex constrained nature in the design space. In order to provide both global exploration and proper search refinement, a hybrid method is developed here based on outstanding features of Evolutionary Computing and Teaching-Learning-Based Optimization. The new method introduces an observer phase for memory exploitation in addition to vector-sum movements in the original teacher and learner phases. Proper integer coding is suited and applied for structural size optimization together with a fly-to-boundary technique and an elitism strategy. Performance of the proposed method is further evaluated treating a number of truss examples compared with teaching-learning-based optimization. The results show enhanced capability of the method in efficient and stable convergence toward the optimum and effective capturing of high quality solutions in discrete structural sizing problems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.147-151
• /
• 2000

This paper presents an analysis of a slot on the broad wall of a rectangular waveguide using the 3D FDTD method. In order to reduce the reflection loss, Mur's 2nd absorbing boundary condition is used. To realize the optimum design by FDTD, the effects of time step, excitation aperture size, analysis region and excitation position in model are derived. The analysis results are compared with the experimental results and they show a good agreement with each other.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.234-237
• /
• 2003

The accuracy of channel estimation significantly affects the performance of coherent OFDM receiver. It is desirable to employ a good channel estimator while requiring low implementation complexity. In this paper, we propose a channel estimator that employs a simple two-dimensional (2-D) moving average (MA) filter as the channel estimation filter. The optimum tap size of the 2-D MA FIR filter is analytically designed in the time and frequency domain in association with the channel condition and pilot signal to interference power ratio. The analytic results can be applied to the design of adaptive channel estimator. Finally, the performance of the proposed channel estimator is verified by computer simulation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.11
• /
• pp.886-893
• /
• 2009

To develop glass panel vacuum lift system for the post process in module line of FPD(Flat panel display) such as LCD and PDP, new vacuum adsorption parts of this system are proposed. These parts are composed of variable geometry configurations utilizing ceramic porous medium for variable size of glass panels. In order to design this device, detail understanding of flow phenomena in the flow path of vacuum adsorption system is essential. Thus, CFD analysis and designs are performed for several configurations in terms of pressure drop and balancing force at the adsorption side. From the result, new configuration is recommended for optimum design and manufacturing purpose.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.515-521
• /
• 2003

There are now many theoretical investigations and real manufactures for numerous applications of photonic crystals (PCs) associated with photonic band gap and photonic integrated circuits. However, there are some difficulties to design and fabricate the desired pattern quality. It is not easy to satisfy accurate critical dimension (CD) for patterns with arbitrary shapes and pitch sizes aligned in various directions. In this work, we report the optimum conditions to better fabricate and design, and greatly improve pattern quality in delineating two-dimensional (2D) PCs in the nanometer range using single- step e-beam lithography system with conventional exposure mode.

• Design & Manufacturing
• /
• v.13 no.4
• /
• pp.34-39
• /
• 2019

In this paper, in order to improve the formability and quality of the injection molded parts in the molds for molding the motorcycle rear cowl injection molded parts with different volumes at the same time, the flow of the molded parts is changed through the injection molding CAE analysis by changing the gate position, runner size and position. It is to find the optimum gate position, the diameter of the runner and the position where the balance is equal. The molded article formed by the optimization resulted in the uniformity of the molten resin at the same time at the corner of the product, thereby maintaining the flow balance favorable for mass production at lower injection pressure.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.59-65
• /
• 1999

There has been an interest to develop an efficient, compact microwave device using field-emitter-arrays (FEA)-based cathode. Toe valuate the optimum device-efficiency in a compact size, the propagation properties of the premodulated electron beam for the FEA-based cathode is studied in detail by the computer simulation using a PIC code, MAGIC. For the premodulated electron beam whose phase of the energy leads the phase of the current by $\pi$/2, the amplitude of the downstream current modulation can be kept as high as the initial modulation level. Using the beam parameters with the beam voltage of 6kV and the current of 2.0A, 30% of efficiency is predicted when the quality factor of 800 is chosen. the device length is reduced about twice compared with that of the conventional device. The design of practical planar cathode is carried out to meet the minimum diameter of the electron beam as 0.5 mm.

• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.49-57
• /
• 2006

This paper describes the architecture for reducing its size and increasing the computation rate in implementing the SEED algorithm of a 12B-bit block cipher, and the result of the circuit design. In order to increase the computation rate, it is used the architecture of the pipelined systolic array, This architecture is a simple thing without involving any buffer at the input and output part. By this circuit, it can be recorded 320 Mbps encryption rate at 10 MHz clock. We have designed the circuit with the VHDL coding, implemented with a FPGA of 50,000 gates.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.514-519
• /
• 2003

The aircraft engine is usually supported by rolling element bearings and has a small damping rate, which is vol y sensitive to external force. The high-performance requirement of the rotors leads to complex assembly designs and are more flexible. Squeeze film dampers (SFDs) are introduced to provide damping while crossing the critical speeds and stability to the rotor s :stem. Hence, the focus of the present investigation is on the decision of an optimal size of the flexible rotor system supported by the squeeze film dampers to minimize the maximum transmitted load and unbalance response over a range operating speeds. The enhanced genetic algorithm (EGA), which was developed by authors, is used in the optimization process. This algorithm is based on the synthesis of a modified genetic algorithm and simplex method. The results show significant benefits in using EGA when compared with nonlinear programming (NLP).

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.876-883
• /
• 2002

Electric vehicle body has to be subjected to uniform load and requires auxiliary equipment such as air pipe and electric wire pipe. Especially, the cross beam supports the weight of passenger and electrical equipments. a lightweight vehicle body is salutary to save operating costs and fuel consumption. Therefore this study is to perform the size and the shape optimization of crossbeam fur electric vehicle using the method of topology optimization to introduce the concept of homogenization based on optimality criteria method which is efficient for the problem having the number of design variables and a few boundary condition. this provides the method to determine the optimum position and shape of circular hole in the cross beam and then can achieve the optimal design to reduce weight.