• Journal of electromagnetic engineering and science
• /
• 제2권1호
• /
• pp.50-55
• /
• 2002

In this paper, Ive propose a bow-tie-shaped meander slot antenna find by a microstrip line to achieve compact size as well as wideband characteristic. While conventional bow-tie slot antennas exhibit wide band characteristic, they have relatively large size. On the other hand, the meander slot antennas are very small, but they reveal quite narrow bandwidth (typically less than 1 %). To realize miniaturized antennas balling large bandwidth, combination of the bow-tie slot and the meander slot geometries is proposed in this paper. Theoretical results show that the proposed antenna with uniform slot width is 65.5 % smaller than that of the conventional bow-tie antenna in size, while the bandwidth is 3 times larger than that of the meander slot antenna. Moreover, the non-uniform slot width antenna shows 60 % smaller in size and about 3.5 times wider in bandwidth than the previous antennas. Measured antenna performance reveals excellent agreement with the predicted values.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.373-378
• /
• 2000

The heat resistant material, in service, may experience static loading, cyclic loading, or a combination of two. An experimental study of crack growth behavior of STS 316L austenitic stainless steel under fatigue, and creep-fatigue loading conditions were carried out on compact tension specimens at various tensile hold times. In the crack growth experiments under hold times. In the crack growth experiments under hold time loading conditions, tensile hold times were ranged from 5 seconds to 100 seconds and its behavior was characterized using the $\Delta$K parameter. The crack growth rates generally increase with increasing hold times. However in this material, the trend of crack growth rates decreases with increasing hold times for short hold time range relatively. It is attributed to a decline in the cyclic crack growth rate as a result of blunting at the crack tip by creep deformation. The effect of grain size on the creep behavior of STS 316L was investigated. Specimens with grain size of 30, 65 and 125${\mu}{\textrm}{m}$ were prepared through various heat treatments and they were tested under various test conditions. The fracture mode of 316L changed from transgranular to intergranular with increasing grain size.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.128-129
• /
• 2016

This study is to categorize the loading of multiple persons on a vertical building elements into three types to test the size of crowd pressure under each loading patterns. The loading patterns is divided under the combination of loading method and loading persons. The loading method is categorized into the method of instantaneous loading of hand on a force plate and the method of continuous loading. The loading persons has been composed of 1~5 persons under the loading patterns. The loading patterns is also divided into lateral loading, longitudinal loading, and agglomeration loading. The subject group has been composed of 12 males in 20s. The load measurement device(size 1800×600×36mm, capacity 20kN, rigidity 28kN/cm) has been designed and manufactured directly. To eliminate the difference of individual, the size of crowd pressure has been converted into the strength to weight ratio (maximum load/weight) for computation. The strength to weight ratio in lateral loading was about 0.91 under instantaneous loading and about 0.47 under continuous loading. The strength to weight ratio in longitudinal loading was about 0.65 under instantaneous loading and about 0.36 under continuous loading. The strength to weight ratio in agglomeration loading was about 0.65 under instantaneous loading and about 0.36 under continuous loading.

• Environmental Analysis Health and Toxicology
• /
• 제23권2호
• /
• pp.67-77
• /
• 2008

It has been observed that the linear relationship between the logarithm of bioconcentration factor (log BCF) of highly hydrophobic chemicals and their log $K_{ow}$ breaks when log $K_{ow}$ becomes greater than 6.0. Consequently, super hydrophobic chemicals were not thought to cause baseline toxicity as a single compound. Researchers often call this phenomenon as "hydrophobicity cutoff" meaning that bioconcentration or corresponding baseline toxicity has a certain cutoff at high log $K_{ow}$ value of hydrophobic organic pollutants. The underlying assumption is that the increased molecular size with increasing hydrophobicity prohibits highly hydrophobic compounds from crossing biological membranes. However, there are debates among scientists about mechanisms and at which log $K_{ow}$ this phenomenon occurs. This paper reviews three hypotheses to explain observed "cutoff": steric effects, kinetic or physiological limitations, and chemical activity cutoff. Although the critical molecular size that makes biological membranes not permeable to hydrophobic organic chemicals is uncertain, size effects in combination with kinetic limitation would explain observed non-linearity between log BCF and log $K_{ow}$. Chemical activity of hydrophobic chemicals generally decreases with increasing melting point at their aqueous solubility. Thus, there may be a chemical activity cutoff of baseline toxicity if there is a critical chemical activity over which baseline effects can be observed.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.73-80
• /
• 2006

High speed machining(HSM) technique is widely used in the appliance, automobile part and mold industries, because it has many advantages such as good quality, low cost and rapid machining time. But it also has problems such as tool breakage, smooth tool path, and so on. In particular, small size end mill is easy to break, so it must be changed before interrupting operation. Generally, the tool life of small size end mill is affected by the milling conditions whose selected parameters are spindle speed, feedrate, and width of cut. The experiments were carried out by full factorial design of experiments using an orthogonal array. This paper shows optimal combination and mathematical model for tool life, Therefore, the analysis of variance(ANOVA) is employed to analyze the main effects and the interactions of these milling parameters and the second-order polynomial regression model with three independent variables is estimated to predict tool life by multiple regression analysis.

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.872-879
• /
• 2002

One of the improtant characteristics of core-shell type nanoparticles is the long-term storage and reuse as an aqueous injection solution when required. For this reason, reconstruction of lyophilized core-shell type nanoparticles is considered to be essential . BAB type triblock copolymers differ from AB type diblock copolymers, which contain the A block as a hydrophilic part and the B block as a hydrophobic part. by not being easily redistributed into phosphate-buffered saline (PBS, pH 7.4, 0.1 M). Therefore, lyophilized core-shell type nanoparticles of CEC triblock copolymer were reconstituted using a somication process with a bar-type sonicator in combination with a freezing-thawing process. Soncation for 30s only resuspended CEC nanoparticles in PBS; their particle size distribution showed a monomodal pattern with narrow size distribution. The bimodal size distribution pattern and the aggregates were reduced by further sonication for 120 s but these nanoparticles showed a wide size distribution. The initial burst of drug release was increased by reconstitution process. The reconstitution of CEC core-shell type nanoparticles by freezing-thawing resulted in trimodal distribution pattern and formed aggregates, although freezing-thawing process was easier than sonication . Drug release form CEC nanoparticles prepared by freezing-thawing was slower than from the original dialysis solution. Although core-shell typenanoparticles of CEC triblock copolymers were not easily performed. Cytotoxicity testing of core-shell type nanoparticles of CEC-2 triblock copolymers containing clonazepam (CNZ) was performed using L929 cells. Cytotoxicity of CNZ was decreased by incorporation into nanoparticles.

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1997년도 제18회 생물과학 심포지움 강연록
• /
• pp.42-57
• /
• 1997

The multicriterion matrix technique (MM-technique) was proposed for a method of monitoring and assessment about vegetation naturalness. Four criteria and 10 subcriteria were selected and two evaluation indices such as VN-value and VN-class were used. The criteria were characterized by syntaxonomical informations of hemeroby concept and potential natural vegetation, hierarchical system between criteria, and ordinal scale of VN-values. VN-values were classified into 11 ordinal levels and condensed to five VN-classes for facilitating practical use. A vegetation map of naturalness described by combination o( two indices was proposed as an alternative resolution of the DGN map. We also discuss the organization of the map content which is a matter of grid size (unit-area). In the case study, a grid size proper to show a full account of real information of actual vegetation is less 250-grid (250 $\times$ 250 $m^2$) in a medium size of city area containing relatively fragmented ecosystems. In conclusion, it was recognized that this new assessment technique was useful and vegetation assessment was accomplished with the smaller grid size in Korea.

• 대한본초학회지
• /
• 제29권6호
• /
• pp.7-13
• /
• 2014

Objectives : Anti-obesity drugs that have been developed so far have limited efficacies and considerable adverse effects affecting tolerability and safety. Therefore, most anti-obesity durgs have been withdrawn. We tried to develop anti-obesity agent by combinations from herbs that are used in food ingredients as well as in traditional medicines. Methods : The 80% (v/v) ethanol extracts from Bamboo (Phyllostachys pubescence) leaf (BL) and Scutellaria baicalensis (SB) and their 1:1 combination (BLSB) was evaluated on high fat diet induced obese mice compared to Omega-3 as a positive control. The mice were divided into six groups (n=5), one group fed a normal diet (ND), and the others fed a high fat diets for eight weeks. Two weeks after starting feeding the diets, the high fat diet groups were orally administered vehicle and Omega-3, BL, SB, and BLSB at dosage of 200 mg/kg/day for six weeks. All groups were assayed for body weights, food efficiency ratio, blood biochemistry parameters, and organic tissue weights. Results : BLSB group showed significant reductions in body weight gain and fat weights of liver and epididymal adipose tissue compared to BL or SB alone as well as control. Total-cholesterol and LDL-cholesterol levels significantly decreased, and HDL-cholesterol level increased. In liver tissue, macrovesicular steaotisis was remarkably improved and its fat cell size was also significantly decreased. Conclusions : These results suggested that a combination preparation of bamboo leaf and S. baicalensis has anti-obesity effect and have synergistic effect compared to bamboo leaf or S. baicalesis.

• 한국항행학회논문지
• /
• 제15권5호
• /
• pp.705-713
• /
• 2011

본 논문에서는 Network RTK 보정정보 생성 프로세스에서 핵심 process인 기준국간 미지정수 결정을 위해 Hatch filter를 이용한 방법과 L1/L2 측정치 조합을 활용하는 방법에 대해 소개하고 시뮬레이션 데이터 및 실측 데이터를 활용하여 그 성능을 비교 및 검증하였다. 각각의 방법에 대해 수식 전개를 수행하였으며, 사용자 성능 검증을 위해서 다중 기준국 네트워크에 대해 생성한 보정정보와 사용자 위치에서 생성한 보정정보의 차이값을 비교하였다. 각각의 기준국간 미지정수 결정 방법을 실측 데이터에 적용하여 사용자 성능을 예측한 결과, Hatch filter를 사용한 경우에는 단일 기준국 RTK 기반의 방법에 비해 다중 기준국 네트워크에서 생성된 보정정보를 사용하는 것이 사용자 성능을 크게 향상시키는 결과를 확인하였다. 그러나 사용자의 미지정수에 영향은 없으나, 상당한 크기의 바이어스 오차가 포함되는 것을 확인하였고 그 원인에 대해 분석하였다. L1/L2 측정치 조합을 이용한 경우, Hatch filter를 사용한 방법에 비해 사용자에 발생하는 오차의 크기가 훨씬 감소하였으며 잔차의 경향성도 훨씬 감소한 것을 확인하였다.

• 동의신경정신과학회지
• /
• 제31권4호
• /
• pp.301-314
• /
• 2020

Objectives: The purpose of this study was to provide clinical evidence to support the use of herbal medicine combined with western medicine for BPSD. Methods: Studies were identified by searching CNKI, Pubmed, EMBASE, Cochrane Library, SCIENCEON, RISS, KMbase, KISS, OASIS. Literature searches of Chinese, English, and Korean databases were performed. Two authors independently extracted the data and evaluated the quality of each study. Results: The literature search identified 203 articles. Of these, 7 were selected for the analysis. The risk of bias in most studies was unclear. The most frequently used diagnostic tools were the NINCDS-ADRDA and DSM-IV. The most commonly used results indicator was NPI. In 6 of the 7 papers, combination treatment (herbal & Western medicine) was statistically significantly more effective than single treatment (Western medicine alone) for BPSD. No significant adverse events were reported. Conclusions: Herbal medicine in combination with Western medicine is more effective for treating BPSD than Western medicine alone. However, the quality of the studies used in this study was uncertain and the sample size was too small. Based on the findings of this study, more high-quality clinical trials are needed to confirm the efficacy of combination treatment.