• 대한공간정보학회지
• /
• 제14권3호
• /
• pp.31-37
• /
• 2006

기존의 터널 측량 방법은 관측시간이 많이 소요되고, 이로 인한 공사비 증가 및 공사기간 지연 등의 문제점을 가지고 있기 때문에 터널측량에서의 오차요인과 시간 및 경비절감 문제 등을 해결할 수 있는 측량시스템을 개발하여 효율성 증대를 위한 측량방법을 제안하였다. 이러한 문제점들을 해결하기 위하여 측량 장비와 Note book 컴퓨터를 연결하여 현장에서 실시간으로 터널측량과 동시에 위치 및 오차들을 결정할 수 있는 시스템을 개발하였다. 터널측량시스템을 개발함으로서 터널 측량시 오차발생과 터널 굴착시의 미굴 및 여굴의 가능성을 최소화하여 시공품질의 향상과 원가 절감 및 공기 단축 등의 효과를 가져 올 수 있도록 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.399-406
• /
• 1999

Recently, the construction of the several highway bridges in the karst area have encountered severe problems associated with cavities and sinkholes. To solve this problems, it is important to understand the distribution characteristics of cavities in the construction site on limestone area. This paper briefly describes the different types, the distribution control factors and the infill sediment types of lime-cavities in the study area, bridge site in the karst area and propose the effective method of survey design. Cavity system may be divided into two main groups, 1)'slot and cave system'and 2)'sinkhole and cave system'. And the shape, the size and the distribution pattern of cavity are controlled by three main factors - rock type, geological structure and ground water condition. Additionally, infill sediment may be considered as one of the important design factors for foundation design and divided into four types by sediment properties. There are geophysical thechnics and geologic survey and drilling test, etc. by the survey method to interpretate characteristics of cavity system, and this methods are optimally designed at the site investigation stage.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권11호
• /
• pp.532-537
• /
• 2006

Lightning induced faults accounts for more than 66% at the transmission lines of KEPCO. The lightning causes damages to power system equipments including transmission line, the blackout of electricity and the electro-magnetic interference. Because of this reason, we need the real time lightning information for the optimal operation of power system. And, it is required to obtain and accumulate the lightning current parameters for the insulation design. In 2005, KEPRI constructed a lightning detection network, the KLDNet (i.e. Kepco Lightning Detection & Information System) and launched a lightning information service for KEPCO customers. It is intended to provide data service on the operation of transmission lines and collect lightning-related data, which is the most important factor regulating power system design and operation. The new system will replace LPATS, the old detection system, which has been operating since 1995 and is rapidly failing in terms of both detection performance and location accuracy. The purpose of this paper is to explain the work performed and the results of that work in performing a site survey of several locations. The purpose of the site survey is to find locations acceptable for the installation of a lightning location receiver in support of a Lightning detection system(LDS). A restriction was placed on the surveyed locations, as they must belong to the Korea Electric Power Company. This requirement was made to facilitate the communication needs of the LDS network. Total of 15 sites were evaluated as possible LDS sensor sites. Some of the sites were rejected for physical reasons and therefore no electrical testing was performed. Of the 15 sites, total of 10 sites were considered acceptable and 5 sites were rejected for various reason. In this paper, we would like to explain the site survey and detection efficiency for LDS.

• 한국정보통신학회논문지
• /
• 제20권9호
• /
• pp.1696-1703
• /
• 2016

본 논문에서는 현재 해양수산부에서 운영 중인 NDGPS 기준국을 SBAS 기준국으로 공동 활용하기 위한 목적으로 사이트 환경 관점에서의 타당성을 확인한다. 이를 위하여 SBAS 기준국의 사이트 환경 요구사항을 도출하고, 본 요구사항을 확인할 수 있는 절차를 수립한다. 그리고 수립된 기준국 사이트 환경 조사 절차를 기반으로 NDGPS 기준국의 현장 조사를 실시하고 그 결과를 분석한다. 이때, 사이트 환경 조사를 위한 사이트 선정은 NDGPS 기준국 17개소를 대상으로 한다. 본 논문의 내용은 NDGPS 기준국을 SBAS 기준국으로 공동 활용하기 위하여 고려해야 할 요소도출 및 위성항법시스템 분야의 기준국 선정 및 구축 시 활용할 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.202-203
• /
• 2020

Unlike price calculation by cost accounting, which categorizes costs into material costs, labor costs, and miscellaneous expenses to determine the construction budget price, construction cost calculation based on Construction Standard Unit Prices utilizes unit prices extracted from market prices of items from projects already completed to estimate costs of similar construction projects. Although unit price information is collected through construction site surveys to revise these construction standard unit prices every year, but due to the limitations of the site survey method, it is difficult to quickly implement the rapid changes in the construction methods and market prices. As such, an important issue that arose was the identification of work items whose prices need urgent revision. This study conducted research on factors that need to be considered when developing online survey system for monitoring construction site market prices. This study is expected to enhance convenience for users, and provide an efficient data collection and management system for administrators.

• 한국항행학회논문지
• /
• 제24권4호
• /
• pp.273-279
• /
• 2020

한국형 SBAS (KASS)에서 기준국 사이트는 GPS/GEO 신호를 수집하고 감시하는 중요한 인프라 시설이다. SBAS 기준국은 상시 관측소보다 요구사항이 명확하고, 운영 단계에서 지속적인 유지보수가 필요하다. KASS 기준국 사이트 구축은 사이트 조사, 사이트 공사, 안테나 측지측량, 장비 설치 및 운영을 위한 준비가 필요하다. 사이트 조사는 사이트 가용 여부 및 시스템 성능 예측을 위한 단계이다. 기준국 사이트, 장비실 및 부대시설은 운영 기관이 사이트 요구 사항을 만족하도록 제공해야 한다. 기준국 안테나의 위치는 매우 중요한 정보로 측지측량을 통하여 정확도를 확보해야 한다. 정확한 위치의 안테나에서 측정된 측정치는 중앙처리국에 제공된다. 기준국의 정확한 위치는 향후 지속적인 위치 확인 및 업데이트를 수행해야한다. 기준국 사이트 구축이 완료 되면, 기준국 장비 설치 및 운영을 위한 업무를 수행한다. 본 논문에서는 7곳의 기준국 사이트의 구축 절차 및 결과를 제시하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권1호
• /
• pp.83-89
• /
• 2023

The Korea Augmentation Satellite System (KASS) system is a Satellite Based Augmentation System (SBAS) under development to provide APV-I SBAS service in the Republic of Korea. The KASS ground segment generates correction and integrity information for GPS measurements of KASS users using the accurate positions of KASS Reference Station (KRS) antenna phase centers. For this reason, the accuracy of KRS reference points through geodetic survey campaigns is one of the important factors for providing the KASS service in compliance with the required navigation performance. In order to obtain accurate positions, two geodetic survey campaigns were performed at several reference points, such as Mark, Center of Mast at Ground Level (CMGL), and Center of Hole in Top Plate (CHTP), of each KRS site using three different survey methods, the Virtual Reference Station (VRS), Flächen Korrektur Parameter (FKP), and raw data post-processing methods. By comparing and analyzing the results, the computed coordinates of the reference points were verified and Antenna Phase Center (APC) positions were calculated using KRS Antenna Reference Point (ARP) data, and the first KASS Site Acceptance Test (SAT#1) was performed successfully using the verified APC coordinates. After the first site survey activities, the KASS operators should maintain the coordinates with the required performance such that the overall KASS navigation performance commitment is guaranteed during the lifetime of 15 years. Therefore, the maintenance plan for the KRS antenna coordinates should be developed before the commissioning of KASS operation planned after 2023. Therefore, this paper presents a geodetic survey method selected for the maintenance activities and provides the rationale for using this method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1282-1288
• /
• 2010

In this study, Site Investigation Program of cut slope is developed using related techniques and experience got from practical application of Inventory Survey Program of cut slope in work for last 4 years. The Site Investigation Program is designed to can be loaded to the Mobile PC for convenience of carrying in filed, convenience of data input and revision, application of diverse programs, convenience of confirming data and facility of establishment of real-time database system using wireless communication like Inventory Survey Program. Also, for connection with Inventory Survey Program, it has a same work process and can establish real-time database system of almost data obtained in filed using stability analysis tool loaded in this program. Application of this developed program is expected to be an opportunity that can contribute to development of slope investigation and database system area using IT techniques.

• 항공우주시스템공학회지
• /
• 제3권1호
• /
• pp.6-11
• /
• 2009

It is anticipated that quality assurance for the Ka band Communication Payload System(COPS) development program of the communication, Ocean & Meteorological Satellite(COMS) may be a core technical factor to be concerned in order to avoid any failure, and to assure its final performance during the mission lifetime in space. Those can be managed and verified and assessed by performing the Quality Assurance (QA) and risk management which helps to prevent and to reduce the critical fails. This paper introduces the Product Assurance (PA) system and procedures for controlling and monitoring sub-contractors which were participated in Ka band Communication Payload System (COPS) development. Also this paper shows Quality Assurance (QA) procedures and detailed their processes for assured the product performed by local companies from site survey for selecting companies to delivery of their equipment.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제5권4호
• /
• pp.789-796
• /
• 2015

건축설계과정에서의 첫 단계로서 대지조사는 주로 대지와 그 주위 환경의 조사를 통해 이루어진다. 이를 위한 주된 방법으론 전통적인 현장조사와 함께, 최근에는 V-world, Google earth 와 같은 온라인 서비스의 지형데이터와 고해상도 항공사진이 이용된다. 그러나 도심 건축 환경은 변화는 이러한 서비스로만 조사하기에는 그 자율성이 부족하다. 최근 대중화되기 시작한 저가 무인비행체를 활용한 저고도 촬영 시스템은 기존의 고가의 무인비행체로만 가능하였던 고해상도 영상지도와, 3d 데이터 취득 등의 작업이 건축 설계 분야에서도 쉽게 접근 가능하게 하고 있다. 이에 본 논문에서는 저비용 초경량 무인항공기를 활용하여 도심 밀집 지역에서의 신속하고 경제적인 현황조사 방법을 제시하고자 한다.