• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.35.2-35.2
• /
• 2011

A wind turbine power performance test is very important to wind turbine manufacturers because a wind farm developer or planner must want to define power performance characteristics and reliability of new wind turbines. Based on the IEC 61400-12-1, A wind turbine test site has to be nicely installed at flat terrain for testing. We are developing the wind power system which is IEC wind class IIa model with rated power of 3MW. KEPCO's Gochang power testing center was considered as candidates to build the test site without site calibration. This paper aims to verify the validity of the test site by using implement site assessment result that was based on IEC 61400-12-1.

• Corrosion Science and Technology
• /
• 제8권3호
• /
• pp.116-118
• /
• 2009

Korea Institute of Construction Materials founded Seosan Outdoor Exposure Test Site 2005 at Korea, which is a part of Worldwide Exposure Network (WEN). To evaluate the test site along with other exposure test sites, three different types of paints have been under real time weathering conditions at three major weathering test facilities around the world. Using these test specimens several spectroscopic experiments along with physical tests have been performed. Also acceleration tests have been performed using the same paints. The correlation of weathered paints among three different test facilities and accelerated test results has been compared. From the results the reliability of Seosan Weathering Test Facility and reasonable life time prediction tests are discussed.

• 풍력에너지저널
• /
• 제9권4호
• /
• pp.65-71
• /
• 2018

To establish an offshore wind turbine test site, a wind resource assessment of the candidate site is required as a preliminary procedure. The wind resource assessment must be performed with at least one year of wind data. If the assessment is performed with short-term wind data, the results cannot validate the wind conditions of the candidate site. This study performs wind resource assessment of Kokunsangun-do to investigate the wind conditions of the candidate site. The wind data is measured by the Automatic Weather System (AWS) of the Korea Meteorological Administration, located at Maldo. The data is for five years, measured from 2013 to 2017. Measured wind data is statistically processed with a 10-minute average scheme to find out the dominant wind direction and wind power density, with yearly wind speed distribution (Weibull-based). This study contributes to build a database of wind energy resources around Maldo. Also, the results of this study could be used for the establishment of an offshore wind turbine test site.

• 한국안전학회지
• /
• 제32권6호
• /
• pp.46-53
• /
• 2017

The risk is expressed as consequence of damage multiplied by likelihood of failure. The installation of a protective system reduces the risk by reducing the likelihood of failure at the facility. Also, the protective system has different effects on the likelihood of failure according to the proof test cycle. However, when assessing risks in the Off-site Risk Assessment (ORA) system, the variation in risk was not reflected according to the proof test cycle of protective system. This study was conducted to examine the need for proof test and the importance of cycle setting by applying periodic proof test of the protective system to ORA. The results showed that the likelihood of failure and the risk increased with longer proof test cycle. The risk of a two-yearly proof test was eight times greater than that of a three-month cycle. From the results, the protective system needs periodic proof test. Untested protective system for a long term cannot be reliable because it is more likely to be failed state when it is called upon to operate. In order to reduce the risk to an acceptable level, it is effective to differently set the proof test cycle according to the priority. This study suggested a more systematic and accurate risk analysis standard than ORA. This standard is expected to enable an acceptable level of risk management by systematically setting the priority and proof test cycle of the protective system. It is also expected to contribute to securing the safety of chemical facilities and at the same time, will lead to the development of the ORA system.

• Environmental Engineering Research
• /
• 제7권2호
• /
• pp.59-66
• /
• 2002

• 한국환경복원기술학회지
• /
• 제21권4호
• /
• pp.75-86
• /
• 2018

This research was thereby made to study and analysis ecological, landscape, and stability qualities of roadside cut Slopes in expressways and national highways that went through revegetation works. Also, evaluation items and framework for integrated assessment of plant structure and restored state for the maintenance were suggested. Following is the summary of the result. firstly, for stabilization of introduced native plant species on roadside cut slops, assessment on the post-project environmental management through long-term monitoring and maintenance works must be made. It signifies a form of authentic recovery and restoration by the native plants. second, current evaluation framework on the test beds is well managed with clear evaluation standards and table while its method of assessing the post management with only test bed results lacks conformity with this study site. Newly developed evaluation framework on the post construction sites is estimated to be used as assessment standards on any roadside construction sites. Third, after site investigation distinction was observed among different revegetating construction types in the long-term perspective. Due to the different duration time of vegetation state between seed-spray measures(degraded in time) and layer-spray measure(maintained), the use of coarse straw-mat mulching work or Coir net was suggested in long term maintenance of cut slopes. forth, segmentation of post environmental assessment is organized into three large categories of "ecological", "stabile", and "landscape" qualities regarding post restoration quality and stability of slope through native plants with which categories marks 50, 30, 20 points of rates. fifth, components of the post environmental assessment were segmented in twelve categories driving results from former experimental construction and newly focused items on site. In the future, it is possible to propose a customized assessment method considering the location and location of construction work if the research on the application of post-environment assessment methods for road construction surface recording is conducted systematically.

• Environmental Analysis Health and Toxicology
• /
• 제22권2호통권57호
• /
• pp.171-175
• /
• 2007

Indigenous species means a species that is likely, due to historical presence, to occur at a specified site for some portion of its life span. Therefore, indigenous species can be useful as an indicator to assess environmental risk caused by hazardous chemicals in a specific site. So far a few toxicity studies using freshwater species which are indigenous to Korea have been carried out. In this study, a freshwater shrimp (Neocardina denticulata) indigenous to Korea was used for acute toxicity test of heavy metals. Neocardina denticulata were exposed to cadmium chloride $(CdCl_2)$, copper chloride $(CuCl_2)$ and zinc chloride $(ZnCl_2)$ using automatic flow-through system for 96 hours. The 96h LC50s were calculated as 0.043 $(0.042{\sim}0.045)mg\;CdCl_2/L,\;0.104(0.098{\sim}0.113)mg\; CuCl_2/L\;and\;2.021\;(1.633{\sim}2.594)mg\;ZnCl_2/L$. When compaired with some international standard species such as medaka(Oryzias latipes), Neocardina denticulata had high sensitivity. Therefore, this study suggested that Neocardina denticulata have possibilities for a sensitive test species to test heavy metal toxicity in aqua-system.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권1호
• /
• pp.109-119
• /
• 2015

최근 수십년간의 산업발달 및 인구증가에 따라 산업폐수 및 각종 비점오염원의 유입으로 수질오염이 심각한 실정이다. 이에 대해 국내 및 국외에서 이에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 유기물질의 분해효과가 있는 유용미생물과 포러스콘크리트를 이용하여 하천 현장에 설치하여 구조적 성능평가와 장기간 수질정화능력을 평가하였다. 구조적 성능평가 결과, 시험체의 공극률은 15%가 적절하다고 판단되며, 또한 수질정화성능 검토 결과 각항목에 대한 제거율은 SS 34.1%, BOD 14.6%, COD 34.9%, T-N 11.4%, T-P 12.6%를 나타냈다. 따라서 유용미생물을 이용한 포러스콘크리트의 현장적용시 수질을 정화시키는데 효과적이라고 판단된다.

• 대한치과보철학회지
• /
• 제36권5호
• /
• pp.758-771
• /
• 1998

Assessment of implant mobility is an important and reliable method to clinically evaluate implant stability. PerioTest is a precise and reproducible device that cam dynamically measure the reaction of damping characteristics of peri-implant tissue. The aim of this study is to evaluate the effects of amount of implant surface area, diameter, type, implantation site, degrees of cortical engagement, and length of time in function on PTVs and to find out the most determining factor on PTVs. The results are as follows 1. 5.0mm diameter implants show significantly lower PTV than that of 3.75mm diameter implants. 2. PTV in the mandible is significantly lower than that of the maxilla 3. In the maxilla, there is no significant difference in PTV during the first year of implant function, but during the second year a significant decrease in PTV is noted. 4. In the mandible, there is a significant decrease in PTV during the first and second year of implant function. 5. Implantation site seems to be the most determining factor on PTV among the influencing factors in this study. In conclusion, the amount of implant surface area, type, degrees of cortical engagement had no significant effect on PTV, but installation site and diameter influenced significantly on PTV

• 한국안전학회지
• /
• 제30권6호
• /
• pp.110-116
• /
• 2015

A 3D camera-based on-site work-related musculoskeletal disorder risk assessment(WMDs) tool has been developed. The device consists of Kinect a 3D camera manufactured by Microsoft, a servo-motor, and a mobile robot. To complement inherent narrow field of view(FOV) of Kinect, Kinect is rotated according to PID servo-control algorithm by a servo-motor attached underneath, to track movement of a subject, producing skeleton-based motion data. With servo-control, full 360 degrees tracking of a test subject is possible by single Kinect. It was found from experimental tests that the proposed device can be successfully employed for on-site WMDs risk assessing tool.