• 전기학회논문지
• /
• 제65권4호
• /
• pp.601-610
• /
• 2016

The light-emitting diode (LED) has been used in a variety of industrial fields and for general 0lighting purposes on account of its high efficiency, low power consumption and long lifespan. The LED is driven by direct current; therefore, an AC/DC converter is typically required for its use. An electrolytic capacitor is generally used for stabilizing DC voltage during use of the AC/DC converter. However, this capacitor has a short lifespan, which makes it a limiting factor in LED lighting. Furthermore, LED lighting requires a dimmable control to enable energy savings and fulfil a growing consumer demand. In this paper, the dimmable single-stage power factor correction (PFC) continuous conduction mode (CCM) flyback converter that employs no electrolytic capacitor is presented. The LC resonant filter is alternatively applied to reduce the 120[Hz] ripple on the output. And the optimum value of the LC resonant filter parameters considering both efficient and performance is analysed. Simulation and experimental results verify the satisfactory operation of the converter.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.939-950
• /
• 2015

A single-stage AC-AC converter has been designed for a wind energy conversion system (WECS) that eliminates multistage operation and DC-link filter elements, thus resolving size, weight, and reliability issues. A simple switching strategy is used to control the switches that changes the variable-frequency AC output of an electrical generator to a constant-frequency supply to feed into a distributed electrical load/grid. In addition, a modified random sinusoidal pulse width modulation (RSPWM) technique has been developed for the designed converter to make the overall system more efficient by increasing generating power capacity and reducing the effects of inter-harmonics and sub-harmonics generated in the WECS. The technique uses carrier and reference waves of variable switching frequency to calculate the firing angles of the switches of the converter so that the three-phase output voltage of the converter is very close to a sine wave with reduced THD. A comparison of the performance of the proposed RSPWM technique with the conventional SPWM demonstrated that the power generated by a turbine in the proposed approximately increased by 5% to 10% and THD reduces by 40% both in voltage and current with respect to conventional SPWM.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.472-473
• /
• 2010

1kW~10kW급의 UPS 토폴로지로서 Line Interactive UPS가 많이 사용되고 있다. Line Interactive UPS는 Single Stage의 AC/DC 변환기 구조를 갖으며 정상상태에서는 적은 전류로 DC측 에너지 저장장치의 충전상태를 유지만 하면 되므로 운전 효율이 높고 가격이 저렴하다. 그러나 고성능의 전류/전압 제어기술이 요구되므로 제품화하는데 어려움이 많다. 본 논문에서는 MATLAB Simulink와 연동하여 간단히 다양한 제어알고리즘을 구현 할 수 있는 dSPACE 장비를 사용하여 실험 장치를 구축하고 Single Stage UPS의 제어알고리즘을 구현하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.205-210
• /
• 2001

A new single stage power factor corrected AC/DC converter has been proposed, that is unified with buck topology and suitable for universal input. The design example of the proposed converter lot 5V 12A application has been presented. The design considerations and simulation results for the proposed converter have been shown. The simulation results show that the line input current harmonics can meet IEC 1000-3-2 Class D requirements for the line input voltage from 90 to 260V.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.242-245
• /
• 2007

PDP TV의 전력 효율을 향상시키기 위해서는 PDP의 구동과정에서 발생하게 되는 불필요한 전력소모와 AC 입력으로부터 원하는 DC를 얻기 위한 과정 중에 발생하는 전력 소모를 최소화하여야 한다. 일반적인 PDP 구동을 위한 입력 전원단은 2단 구조의 역률 보상형 컨버터를 채용하고 있으며, PDP 구동시 전력소모가 가장 큰 서스테인 드라이버와 독립적으로 구성된다. 그러나 이러한 회로의 구현은 저가의 PDP를 요그하는 시장 상황에 유연하게 대처하는데 많은 어려움을 준다. 따라서 본 눈문에서는 최소의 전력 변환 단계를 가지는 PDP용 전원공급장치와 서스테인 구동 드라이버를 결합한 회로를 제안한다. 제안하는 시스템은 1단방식의 입력전원부 구성을 통해 전력 변환단을 최소화하여 전력 변환 중에 발생하는 손실을 최소화하며, PDP 서스테인 드라이버의 구동전압을 직접 공급하는 형태로 구성하여 시스템의 부피의 감소, 원가 절감을 이룰 수 있다.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1288-1297
• /
• 2016

This study proposes a single-stage light-emitting diode (LED) tube lamp driver with input-current shaping for T8/T10-type fluorescent lamp replacements. The proposed AC-DC LED driver integrates a dual-boost converter with coupled inductors and a half-bridge series-resonant converter with a bridge rectifier into a single-stage power conversion topology. This paper presents the operational principles and design considerations for one T8-type 18 W-rated LED tube lamp with line input voltages ranging from 100 V rms to 120 V rms. Experimental results for the prototype driver show that the highest power factor (PF = 0.988), lowest input current total harmonic distortion (THD = 7.22%), and highest circuit efficiency (η = 92.42%) are obtained at an input voltage of 120 V. Hence, the proposed driver is feasible for use in energy-efficient indoor lighting applications.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권7호
• /
• pp.343-351
• /
• 2003

In this paper, interleaved boost converter is applied as a first-stage converter in switch mode power supply. The first-stage converter plays a role to improve power factor. Interleaved Boost Power Factor Corrector(IBPFC) can reduce input current ripple as a single voltage control loop only without inner current loop, because input current is divided each 50% by two switching devices. Each converter cell is also operated in discontinuous current mode and inductor current of each converter is discontinuous. Total input current which is composed by each converter cell is continuous current. Thus, IBPFC is able to improve input current ripple. IBPFC operating in discontinuous current mode can be classified as six modes from switching state and be carried out state space averaging small signal modeling. A control transfer function is obtained according to the modeling. Not only steady-state characteristics but also dynamic characteristics is considered. Single voltage control loop is also constructed by the control transfer function. From experimental result, improvement of power factor and input current ripple are verified.

• 전력전자학회논문지
• /
• 제2권3호
• /
• pp.26-36
• /
• 1997

본 논문에서는 저용량의 응용 분야에 적합한 half-bridge 컨버터를 기반으로 하는 단상 AC/DC 컨버터를 제안한다. 제안된 컨버터는 고역률, 저하모닉 왜곡의 특성이 있으며 좋은 출력 레귤레이션 특성을 가지고 있다. 그리고 asymmetrical 제어를 통해 소프트 스위칭을 함으로써 스위칭 손실을 줄였으며 출력단의 정류손실을 줄이기 위해서 synchronous rectifier를 적용하였다. 또한 본 컨버터를 체계적으로 설계하기 위해 평균화법을 통한 모델링을 수행하여 설계식을 도출하였다. 이 설계식을 통하여 프로토타입 컨버터를 설계하여 실험한 결과 제안된 컨버터는 IEC555-2 규제를 만족하였고 정격에서 효율은 약 85%를 얻었다.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.172-180
• /
• 2012

Z-source inverters (ZSI) are used to realize both DC voltage boost and DC-AC inversion in single stage with a reduced number of power switching devices. A traditional MPPT control algorithm provides a shoot-through interval which should be inserted in the switching waveforms of the inverter to output the maximum power to the Z-network. At this instant, the voltage across the Z-source capacitor is equal to the output voltage of a PV array at the maximum power point (MPP). The control of the Z-source capacitor voltage beyond the MPP voltage of a PV array is not facilitated in traditional MPPT algorithms. This paper presents a unified MPPT control algorithm to simultaneously achieve MPPT as well as Z-source capacitor voltage control. Development and implementation of the proposed algorithm and a comparison with traditional results are discussed. The effectiveness of the proposed unified MPPT control strategy is implemented in Matlab/Simulink software and verified by experimental results.

• 전력전자학회논문지
• /
• 제5권1호
• /
• pp.79-87
• /
• 2000

본 논문은 저 도전 손실을 갖는 새로운 단단, 단일 스위치 역률보상 부스트형 교류/직류 변환기를 소개한다. 제안한 변환기는 약간의 구조적 차이점을 제외하고 기존의 변환기와 동일하게 해석될 수 있다. 먼저, 제안한 변환기와 기존의 변환기의 동작원리를 파악하여 두 변환기의 차이점을 이해하고 1단 역률 보상 교류/직류 변환기의 구조적 문제점인 에너지 저장 커패시터에서의 직류 전압 상승을 방지하기 위한 직류 부스 전압 궤환 방식을 도입하여 제안한 변환기에 적용하였다. 100W급 변환기를 제작/실험하여 본 변환기의 타당성을 검증하였다.