• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.13-19
• /
• 2018

This research is to optimize Single-Piece Side otr reinforcement using Hot-stamping and to strengthen weak regions on Single-Piece Side otr reinforcement. As a consequence, the weight and the number of parts were reduced and resulting in improvement of impact and stiffness performance when compared to multi-piece construction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.8
• /
• pp.1110-1118
• /
• 1999

This study was to examine the effects of garment types on thermal insulation using a thermal manikin. cotton polyester wool silk and rayon were selected as outer wears like a blouse a skirt slacks and one-piece for this study Acetate was chosen as a lining. Brief and upper innerwear with long sleeves(cotton) were also chosen as the innerwear. The results were as follows: 1. The thermal insulation of the garment of single layer was in proportion to the covering area of garment in all types of clothing. 2. On adding the innerwear or the lining or both the thermal insulation of the each garment of single layer were showed a different trends by garment types. The thermal manikin insulations of one-piece dress adding the innerwear was higher than those of blouse-skirt suits. The thermal insulation of one-piece dress adding the innerwear and lining was lower than those of blouse-skirt suits. 3. The increasing rates of thermal insulation of multi-layered garments had different value by garment types but garment made of rayon and silk were showed very high increasing rates of thermal insulation. 4. The increasing rates of the thermal insulation of one-piece dress added the lining the innerwear or both except polyester showed the highest value and then blouse-slacks suits' turn came ound Blouse-skirt suits had the lowest the increasing rates of thermal insualition value.

• The Research Journal of the Costume Culture
• /
• v.9 no.3
• /
• pp.485-500
• /
• 2001

The purpose of this study is to develop the formal wear for social activity of dwarf. Second investigation for choices of designs based upon data from the first questionnaire investigation, led us to make proposals for design, pattern production, garment-cutting and dressmaking. The effect of wearing the made-up garments was carefully evaluated in order to establish principles for the development of clothes for dwarf. Conclusion is as follow. Dwarf felt uneasy in conventional street dress. When buying clothes their most important criteria was design wanted clothes that would help them to look taller. Analysis of design preference to complement perceived physical weak points revealed: 'a pink ensemble' comprising of a high-waist, one-piece dress, and a black slacks suit comprising of a striped, single-breasted, tailored jacket, and straight-type slacks and blouse. It was found that a bolero jacket and a high-waist, ankle-length, one-piece dress helped create an optical illusion of increased height, for both the wearer and an observer. A pastel ton-pink, one-piece also created this effect on small bodily types, as well as offering a silky, mellow attractiveness. A suit of a striped, single-breasted tailored jacket, and straight-type slacks and blouse, created the two fold illusion of disguising hip imbalance with the length of the jacket and drawing an onlooker\`s gaze to the wearer\`s face through the tailored collar, they also looked taller due to the stripes.

• Architectural research
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2009

In contemporary architecture, glass is being used less as a single piece for the exterior envelope, due to a variety of influences such as increased performance regulations, the market environment and technical developments. An architectural exterior wall today is usually installed as a 'ystem' wall, not as a single plane glass wall. That brings up the necessity to question the appropriateness of the materiality of an individual piece of glass for the exterior envelope in urban settings. Therefore, in many cases it is appropriate to examine materiality of glass as a system. A new examination of materiality can be carried out by analyzing the interactions between layers that constitute a system. This paper examines the experimental use of glass systems in contemporary architecture, and analyzes them to interpret the relationship between the layers of each system in order to establish the diversified materiality of glass in contemporary architecture.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.6
• /
• pp.110-116
• /
• 2005

A single-piece-machined-part has superior characteristics to an assembly of several pieces of part especially for aircraft components. It is necessary to develop high efficient 'multi-head router machine' for machining a large size single-piece-part on a large scale. In this type machine, many cutting chips are generated. These chips should be removed automatically f3r productivity and part precision. In this study, the design evaluation of the cutting chip collecting apparatus for 'multi-head router machine' was complemented using performance test and finite element analysis.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.688-693
• /
• 2007

Most frame structures cannot be manufactured in a single-piece form. Ideally, when a structure is built up by assembling multi pieces, assembly at the joints should be rigidly performed enough to have almost full stiffness, which is difficult for practical reasons such as manufacturing cost and time. In this research, we aim to develop a manufacturability-oriented compliance-minimizing topology optimization using a ground beam model incorporating additional zero-length elastic joint elements. In the present formulation, design variables control the stiffness of zero-length elastic joints, not the stiffness of beams. Because joint stiffness values at the converged state can be utilized to select candidate assembly locations and their strengths, the technique is extremely useful to design multi-piece frame structures. An optimal layout is also extracted based on the stiffness values.

• Journal of Conservation Science
• /
• v.36 no.3
• /
• pp.197-212
• /
• 2020

This study analyzed the microstructure of ring-pommel swords, excavated from Ancient Tombs, Hadae, Ulsan and examined their production technique, using non-destructive testing and a metallurgical method. The results confirmed that the five ring-pommel swords, unearthed in Ancient Tombs, Hadae, Ulsan, as identified by radiographic non-destructive testing, had been solely manufactured using iron, through forging based on the single-piece technique. Furthermore, these results were compared with previous studies, and the manufacturing techniques of single-piece ring-pommel swords were categorized into three types: pure iron - changing the shape, pure iron - changing the shape - carburization, and steel - changing the shape - quenching. The ring-pommels of four swords had around 0.7% of carbon content, which is as much as for eutectoid steel and higher than for other parts of these swords, such as the backs of their blades and handles. The weapon function of a small ring-pommel sword, under 60cm in length, was maximized by quenching focusing on its blade. Conversely, the martensite quenching structure was not observed in four ring-pommel swords shorter than 75cm. In other words, the same types of single-piece ring-pommel swords(late in 2C~early in 4C) were unearthed from Ancient Tombs, Hadae, and the group who has manufactured these swords is presumed to have limited their effectiveness, functionally depending on purposes, through an iron-making process and heat-treatment techniques.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.149-153
• /
• 2000

Substituting composite structures for conventional metallic structures has many advantages because of higher specific stiffness and specific strength of composite materials. In this work, one-piece propeller shafts composed of carbonfepoxy and glass/epoxy composites were designed and manufactured for a rear wheel drive automobile satisfying three design specifications, such as static torque transmission capability, torsional buckling and the fundamental natural bending frequency. Single lap adhesively bonded joint was employed to join the composite shaft and the aluminum yoke. For the optimal adhesive joining of the composite propeller shaft to the aluminum yoke, the torque transmission capability of the adhesively bonded composite shaft was calculated with respect to bonding length and yoke thickness by finite element method and compared with the experimental result. Then an optimal design method was proposed based on the failure model which incorporated the nonlinear mechanical behavior of aluminum yoke and epoxy adhesive. From the experiments and FEM analyses, it was found that the static torque transmission capability of composite propeller shaft was maximum at the critical yoke thickness, and it saturated beyond the critical length. Also, it was found that the one-piece composite propeller shaft had 40% weight saving effect compared with a two-piece steel propeller shaft.

• Journal of the Korean Society of Costume
• /
• v.51 no.6
• /
• pp.101-115
• /
• 2001

This study is to examine the characteristics of fabrics in Koryo dynasty by reviewing the fabrics for enshrining oblations inside a buddhist statue in MoonSoo temple, which are currently possessed in SooDuk temple. The research results follows : The fabrics are 33 pieces in total : 28 Pieces of normal fabrics, 5 pieces of fabrics that is used for covering the five grains, and others like variegated silk threads. Out of 33 pieces of fabrics are there 31 pieces of silk and 2 pieces of ramie. The tabby fabrics, which have the most pieces among the fabrics, are 11 pieces in total. There are 1 piece of designed tabby fabri. whose patterns are expressed by dyeing. as well as non-designed tabby fabric. The twill fabrics are 8 pieces in total. Its patterns are mainly the type that small patterns are consecutively reiterated. And they have various patterns including plant patterns, such as lotus pattern, flower pattern. etc., animal patterns such as dragon pattern. etc., geometric patterns. such as turtoise-shell pattern. swastika, etc. The leno and gauze fabrics are 1 piece of 4-end complex designed-gauze and 1 piece of gill gauze. The compound woven fabrics are 2 pieces of brocaded gauze and 3 pieces of brocaded twill. Brocaded gauze is a kind of brocaded fabrics and is made by adding a gold thread between wefts of already weaved gauze. The figured fabrics are 1 piece of tabby fabric, 6 pieces of twill fabrics, 4 pieces of leno and gauze fabrics, and 5 pieces of compound woven fabrics. All of them are 16 pieces out of all 33 pieces and amount to almost 50%. Single-patterned fabrics, that is one pattern is expressed individually, are much more than any others. Plant patterns are the ones that are used the most.

• Journal of Fashion Business
• /
• v.1 no.3
• /
• pp.19-34
• /
• 1997

The role of fashion image in modern society is being diversified from product planning to consumer satisfaction. In this research, after surveying female college students, the diversified modern fashion image was patterned. On the analogy of the relationship between these patterned image and design factors, the following conclusion was obtained. 1. The most popular styles are jacket and pants suits, three-piece outfits, tight mini-skirts and X-silhouette. Little decoration is used in general. simplicity is shown as trend by utility fabrics in single color-black, brown, beige and blue-with no pattern. Various materials such as wool, cotton, wool or cotton blended with other materials, silk, satin, knit, lace, vinyl and leather are used. 2. Fashion image is divided into four factors; factors that show fad, dignity, activity and simplicity. 3. Factors that show fad; style of tops, material of bottoms and length of bottoms reflect fad. blousons, three-piece outfits, pants rather than skirts, X-silhouette and mini-skirts are prevailing. Vinyl, leather, knit, lace and satin are the materials well used. 4. Factors that show dignity; Style and material of tops, the way of top and bottom pieces are matched and length of bottom or pieces reveal the characteristics. Jackets, blouses, half-coats and one-piece outfits rather than two-pieces are popular. Tight skirts in natural or midi length or pleated skirts are common. Wool, wool blended with other materials, leather and X-silhouette are design factors that reveal dignity well. 5. Design factors that show active image; Straight pants, three-piece outfits, T-shirts, shirt -blouses, vests, and blausons are popular. Knit and lace are used for tops, leather and vinyl are used for bottom pieces and cotton is widely used. Y- or H-silhouette are used to show active image.