• Structural Engineering and Mechanics
• /
• 제62권4호
• /
• pp.455-464
• /
• 2017

Rayleigh damping model is recommended in the recently developed Performance-Based Earthquake Engineering (PBEE) methodology, but this methodology does not provide sufficient information due to the complexity of the damping mechanism. Furthermore, each Rayleigh-type damping model may have its individual limitations. In this study, Rayleigh-type damping models that are used widely in engineering practice are discussed. The seismic performance of a large-span single-layer latticed dome subjected to earthquake ground motions is investigated using different Rayleigh damping models. Herein a simulation technique is developed considering low cycle fatigue (LCF) in steel material. In the simulation technique, Ramberg-Osgood steel material model with the low cycle fatigue effect is used to simulate the non-uniformly distributed material damping and low cycle fatigue damage in the structure. Subsequently, the damping forces of the structure generated by different damping models are compared and discussed; the effects of the damping ratio and roof load on the damping forces are evaluated. Finally, the low cycle fatigue damage values in sections of members are given using these damping models. Through a comparative analysis, an appropriate Rayleigh-type damping model used for a large span single-layer latticed dome subjected to earthquake ground motions is determined in terms of the existing damping models.

• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.821-825
• /
• 2007

본 연구에서는 응력이력 의존적 소성포텐셜을 도입한 단일 경화 모델의 검증을 정규압밀, 약간 과압밀, 심한 과압밀 점토시료에 대하여 수행하였다. 단일 경화 모델은 한계상태 토질역학을 기본으로 비교적 적은 매개변수를 채택하여 최근에 개발된 탄소성 모델이다. 삼축압축시험이 정밀하게 수행되었으며 시험결과는 모델의 예측결과와 전반적으로 잘 부합하였다. 시험결과와의 차이는 단일 경화 모델이 주로 주응력 회전을 강조하기 때문이다. 그러나 소성일 H 및 주응력 회전각 변수를 통하여 지반재료에서 응력이력을 효과적으로 소성일에 반영할 수 있다는 사실이 검증되었다.

• Communications for Statistical Applications and Methods
• /
• 제11권1호
• /
• pp.161-168
• /
• 2004

A single-index model is useful in fields which employ multidimensional regression models. Many methods have been developed in parametric and nonparametric approaches. In this paper, posterior inference is considered and a wavelet series is thought of as a function approximated to a true function in the single-index model. The posterior inference needs a prior distribution for each parameter estimated. A prior distribution of each coefficient of the wavelet series is proposed as a hierarchical distribution. A direction $\beta$ is assumed with a unit vector and affects estimate of the true function. Because of the constraint of the direction, a transformation, a spherical polar coordinate $\theta$, of the direction is required. Since the posterior distribution of the direction is unknown, we apply a Metropolis-Hastings algorithm to generate random samples of the direction. Through a Monte Carlo simulation we investigate estimates of the true function and the direction.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1869-1875
• /
• 1995

The adhesively bonded tubular single lap joint shows a nonlinear relationship between the applied torque and the resulting displacement under the static-torsional loading, which is induced from the nonlinear properties of the adhesive. However the torque transmission capability in the case of the dynamic-torsional loading is much less than that in the case of the static-torsional loading, the stress level of the adhesive is usually in the region of the linear stress and strain relation and the stress distributions of the joint can be obtained by the linear analysis. In this paper, a failure model for the adhesively bonded tubular single lap joint under the torsional fatigue loading was developed with respect to the adhesive thickness that was a critical factor in predicting the static torque transional-cyclic loadings was proposed.

• 대한산업공학회지
• /
• 제28권4호
• /
• pp.351-359
• /
• 2002

In this paper, stochastically dependent single and sequential acceptance sampling plans are dealt when the process follows a Polya process model. A Monte-Cairo algorithm is used to find the acceptance and rejection probabilities of a lot. The number of defectives for the test to be accepted and rejected in a probability ratio sequential test can be found by using these probabilities. The formula to measure performance of these sampling plans is developed. Type I and II error probabilities are estimated by simulation. Dependent multiple acceptance sampling plans can be derived by extending the sequential sampling procedure. In numerical examples, single and sequential sampling plans of a Polya dependent process are examined and the characteristics are compared according to the change of the dependency factor.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.128-135
• /
• 1999

A driving simulators of aircraft and vehicle may consist of hydraulic power systems with many single-rod cylinders. The single-rod hydraulic systems are convenient but need more robust control scheme in order to achieve a reliable performance against the wide range of operating disturbances and the inherent model uncertainties. $H_{\infty}$ control scheme was implemented to the 2 degree-of-freedom hydraulic device similar to the simple driving simulator. With the reasonable disturbances from sensor, base and pump and also with the linearization of model, the simulation and experimental results showed good agreements.

• 한국경영과학회지
• /
• 제22권2호
• /
• pp.31-44
• /
• 1997

This paper presents an approximate analytical model to estimate the mean packet walting times at the stations in the IEEE 802, 6 subnetwork of a metropolitan area network. Each station is modeled as a two queue single server system, which serves data packets and requests from downstream stations according to the DQDB protocol. The model estimates the mean waiting time of the requests and in turn, using the discrete time work conservation law, estimates the mean waiting time for packets. Simulation experiments shows that the model accurately works even under very high traffic loads.

• 물과 미래
• /
• 제20권3호
• /
• pp.229-235
• /
• 1987

The purpose of this study is to estimate the parameters of linear reservoir models in order to derive the Instantaneous unit hydrograph from a given small experimental watershed. The linear reservoir model is a conceptual model, consisting of cascade or parallel equal linear reservoirs, preceded by a linear channel which involved Nash, SLR(single linear reservoir) and 2-PLR(two-parallel linear Reservoir) model. the Nash model have two parameters N and K, single linear reseroir has one parameter $K_I$ and two-parallel linear reservoirs have two parameters $K_1,\;K_2$; where N denote the number of reservoirs and K is the storage coefficient of each reservoirs.

• 대한화학회지
• /
• 제14권1호
• /
• pp.1-4
• /
• 1970

The methyl group does not possess an unshared pair of electrons. But F.A. Matsen has introduced the concept of the methyl group as a Pseudo-heteroatom which contributes a pair of electrons to ${\pi}$ system. In this heteroatom model, A. Streitwieser et al have assumed that the electrons in a methyl group behave to their approximation as a single electron pair on a single atom. But the theoretical basis on the heteroatom model hyper-conjugation has not studied yet. In this paper, Linear combination of Bond orbital and group theory is used to investigate the theoretical basis for it.

• 대한전기학회논문지
• /
• 제39권5호
• /
• pp.478-484
• /
• 1990

An automatic tuning method of a PID controller which is used for single input single output processes is proposed. In the proposed tuning method, the frequency response data model is adopted along with the performance index which is an integral of time weighted square error between reference model and process frequency response data model for tuning. This method is easier to retune when either the process dynamics is changed or the reference model is changed. Finally, an example is provided to show the usefulness of the method.