• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.227-234
• /
• 2003

In this study, an equivalent continuum model for single wall carbon nanotube is proposed. The model links interatomic potentials and atom structure of a materials to a constitutive model on the continuum level. The Young's modulus and shear modulus were predicted by the model. The predictions were in good agreement with the prior experimental results available in the literatures. Also, the strain energy of the carbon nanotube was predicted as a function of the radius of the carbon nanotube.

• 대한의용생체공학회:의공학회지
• /
• 제10권3호
• /
• pp.303-308
• /
• 1989

A new estimationn mothod of single-EP(evoked potential) using adaptive algorithm and paralnetrlc model is proposed. Since the EEG(eletroencephalogram) signal is stationary in short time interval the AR(autoregressive) parameters of the EEG are estimated by the Burg algorithm using the EEG of prestimulus interval. After stimulus, the single-EP is estimated by adaptive algorithm. The validity of this method is verified by the simulation for generated auditory single-EP based on parametric model.

• 대한토목학회논문집
• /
• 제14권1호
• /
• pp.217-229
• /
• 1994

Lade의 Double surface와 Single surface 구성모델의 변형을 예측의 정도를 비교평가하기 위하여 백마강모래로 두 구성식의 토질매개변수를 다수 구하고 각 변수의 통계치를 분석하였다. 이 통계치를 이용하여 일반함수의 변동계수를 산정하는 1계근사법으로 두 구성모델의 변형율에 대한 변동계수를 해석하였다. 그 결과 각 토질매개변수의 결정에는 Single surface 구성모델의 변수가 Double surface 구성모델의 변수보다 변동계수가 작게 나타나므로 매개변수결정에 일관성이 있는 반면 확률론으로 해석한 축 변형율의 변동계수는 Double surface 구성모텔에서 안정된 값을 나타내고 있으며, 체적 변형율에서는 두 구성모델 모두 안정된 해석결과를 보인다. 이는 두 구성모델의 특성을 비교한 다른 연구 결과와 일치하는 경향으로서 확률론에 의한 구성식의 평가가 효과적인 수단임을 알 수 있었다.

• 한국농공학회지
• /
• 제42권3호
• /
• pp.97-106
• /
• 2000

The study is closely relevant to Lade's single work hardening model. This model has been shown to have good applicability to cohesive soils. However the validation of this model on the clayey soils has not been satisfactorily reported. To scrutinize the applicability of this model on clayey foundation the laboratory tests for Kwangyang clayey soils were performed using the improved cubical triaxial test apparatus designed originally by Lade. A computer program was developed by which soil parameters for the single work-hardening model can be rationally determined by deleting some dispersed test data generated usually at the initial stage of laboratory tests. And using the program numerical analysis of the cubical clayey specimens using intermediate principal stress was carried out and a good agreement between observed values and numerical results was found.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.91-94
• /
• 2013

Commercial computational fluid dynamics (CFD) codes traditionally rely on the computational efficiency of the simplified single-film apparent char kinetic model to predict char particle temperatures and char conversion rates in pulverized coal boilers. The aim of this study is to evaluate the reliability of the single-film apparent kinetic model and to suggest the importance of proper use of this model. For this, a parametric study was conducted with a consideration of main parameters such as Stefan flow, product species, particle evolution, and kinetic parameters.

• 한국컴퓨터정보학회논문지
• /
• 제12권4호
• /
• pp.209-219
• /
• 2007

100PPM 품질인증시스템은 1995년 공업진흥청의 주도하에 추진되어져, 우리나라 산업부분의 품질경쟁력 제고에 기여하였다. 2000년에는 국내의 중소기업을 대상으로 보다 더 완벽한 수준의 Single PPM 품질인증시스템으로 상향 조정토록 하였고, 출하불량률과 시장 불량률 수준을 10ppm 이하로 줄이는 것을 품질목표로 하고 있다. 현재까지 1.818개의 회사들이 Single PPM 품질인증시스템을 인증 받았으며, Single PPM 품질혁신운동은 21C의 사회 경제적인 무결점 목표를 달성하기 위한 품질혁신운동이다. 이 논문의 목적은 Single PPM 품질혁신운동이 현재 처해있는 문제점들을 개선하고자, Kano 모델에 기반을 둔 글로벌 지속가능 품질혁신(GSQI) 지수를 개발하고, 이를 통하여 Single PPM 품질혁신운동의 개선을 도모하고자 함이다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.572-579
• /
• 2006

Accurate heat release analysis based on the cylinder pressure trace is important for evaluating combustion process of diesel engines. However, traditional single-zone heat release models (SZM) have significant limitations due mainly to their simplified assumptions of uniform charge and homogeneity while neglecting local temperature distribution inside cylinder during combustion process. In this study, a heat release analysis based on single-zone model has been evaluated by comparison with computational simulation result using Fire-code, which is based on multidimensional model (MDM). The limitations of the single-zone assumption have been estimated, To overcome these limitations, an improved model that includes the effects of spatial non-uniformity has been applied. From this improved single-zone heat release model (Improved-SZM), two effective values of specific heat ratios, denoted by ${\gamma}_V$ and ${\gamma}_H$ in this study, have been introduced. These values are formulated as the function of charge temperature changing rate and overall equivalence ratio. Also, it is applied that each equation of ${\gamma}_V$ and ${\gamma}_H$ has respectively different slopes according to several meaningful periods during combustion progress. The heat release analysis results based on improved single-zone model gives a good agreement with FIRE-code results over the whole range of operating conditions of target engine, Hyundai HiMSEN H21/32.

• Structural Engineering and Mechanics
• /
• 제48권1호
• /
• pp.57-75
• /
• 2013

It is still inadequate for investigating the highly nonlinear and complex mechanical behaviors of single-layer latticed domes by only performing a force-based demand-capacity analysis. The energy-based balance method has been largely accepted for assessing the seismic performance of a structure in recent years. The various factors, such as span-to-rise ratio, joint rigidity and damping model, have a remarkable effect on the load-carrying capacity of a single-layer latticed dome. Therefore, it is necessary to determine the maximum load-carrying capacity of a dome under extreme loading conditions. In this paper, a mechanical model for members of the semi-rigidly jointed single-layer latticed domes, which combines fiber section model with semi-rigid connections, is proposed. The static load-carrying capacity and seismic performance on the single-layer latticed domes are evaluated by means of the mechanical model. In these analyses, different geometric parameters, joint rigidities and roof loads are discussed. The buckling behaviors of members and damage distribution of the structure are presented in detail. The sensitivity of dynamic demand parameters of the structures subjected to strong earthquakes to the damping is analyzed. The results are helpful to have a better understanding of the seismic performance of the single-layer latticed domes.

• 조명전기설비학회논문지
• /
• 제26권9호
• /
• pp.40-46
• /
• 2012

The single-phase switched reluctance motor(SRM) has only one inductance variation and the positive torque is generated in the restricted section. So, it cannot be started by itself. To solve this problem, many researchers have addressed the several starting method for the single-phase SRM. This paper is focused on the torque characteristics of the single-phase SRM according to starting method. The four major starting method - permanent magnet, saturable stator pole, to grade the rotor, stepped rotor pole - is selected to analyze the torque characteristics. The analysis model of each starting method is designed to changed the pole shape or inserting other material in the basic model. The torque characteristics of each analysis model is obtained by using FEM analysis. The FEM analysis is performed at incremental rotor positions over half inductance cycle in any one pole with 250AT, 500AT, 750AT. The distortion factor of each analysis model is analyzed through the FFT to compare the distortion between basic model and four analysis model.

• 대한토목학회논문집
• /
• 제13권3호
• /
• pp.163-172
• /
• 1993

본 문은 Lade의 Single surface 구성모델의 변형율 예측 능력을 평가하기 위해 백마강모래를 사용, 등방압축시험과 배수삼축시험을 반복 시행하여 모델에 필요한 각 토질매개변수값을 다수 구하여 통계처리 하였다. 그리고 1계근사법을 이용하여 이 구성모델의 변형율 예측능력을 확률론적으로 평가하였다. 그 결과 변동계수와 상관계수를 효과적으로 이용하여 토질매개변수의 수를 줄일 수 있을 것으로 기대되며 변동계수가 0.51 이하로서 이 구성모델의 변형율 예측 능력은 확률론적으로 매우 안정된 구성모델임을 알았다.