• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1096-1098
• /
• 2003

SBC(Single Board Computer) is being developed for MSC(Multi-Spectral Camera) on KOMPSAT-2(Korea Multi-Purpose Satellite). SBC controls all the units of MSC system and gets commands and sends telemetry to and from spacecraft bus via 1553 communication channel. Due to the fact that SBC does very important roles for MSC system operation and SBC operates with 100% duty cycle, SBC is designed to have high reliability. SBC which has Intel 80486 as a main processor includes eight serial communication channels, one mil-std-1553 interface channel and several discrete interfaces. SBC incorporates 2Mbyte radiation hardened SRAM(Static Random Access Memory) and 1Mbyte flash memory. There are also PIC(Programmable Interrupt Controller), counter, WDT(Watch Dog Timer) in the SBC. In this paper, the design result of the SBC is presented.

• International Journal of Computer Science & Network Security
• /
• v.23 no.9
• /
• pp.162-165
• /
• 2023

Power can be generated from either renewable or non-renewable sources. Renewable sources are liked to maintain a strategic distance from contamination emanation and rely on upon fossil energizes which is decreasing day by day. The proposed sun powered vitality transformation unit comprises of a sun oriented exhibit, Bidirectional DC-DC converter, single stage inverter and AC. The inverter changes over DC control from the PV board into AC power and offered it to the heap which is associated with the lattice. The photovoltaic sun powered vitality (PV) is the most direct approach to change over sunlight based radiation into power and depends on the photovoltaic impact. The most extreme power point following of the PV yield for all daylight conditions is a key to keep the yield control per unit cost low for fruitful PV applications. Framework associated PV frameworks dependably have an association with people in general power matrix by means of an appropriate inverter in light of the fact that a PV module conveys just dc power. This project presents the new design, Development and Performance Analysis of a Grid Connected PV Inverter. Demonstrate that the proposed framework can lessen the Energy Consumption radically from the power board and give a solid support to the Grid.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.126.4-126
• /
• 2001

Recently, researches on CIM in product lines of industrial plant are widely progressed, automation of working environment with modernization of product equipments is realized and also, installation of integrated control system based on computer is activated. Since the CIM system is basically developed by using computer, there are several complicated problems such as design problem of hardware interface between computer and many product machines with individual special functions, software development problem with realtime data process and multi communication functions for realtime data monitoring and control of product machines This paper shows the development results for a single board type of microcontroller and a monitoring software based on realtime processing database system ...

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.10
• /
• pp.1-5
• /
• 2015

Based on the dual hardware and software with distributed recovery blocks, the centralized type fault tolerant store management system(SMS) was proposed. As a result of trade off study related to mutiplex hardware system design, dual single board computer(SBC) was adapted. To verify redundancy function of the proposed structure, the prototype SMS and weapon simulator were used. The proposed SMS operated normally without being affected by a primary SBC failure. The switching time from primary SBC to shadow SBC was within 200 ms. The reliability of the proposed SMS was predicted and compared with the non fault tolerant SMS, thereby it was proved that the proposed SMS has a higher reliability than the non fault tolerant system within effective range.

• Journal of Digital Contents Society
• /
• v.19 no.8
• /
• pp.1507-1514
• /
• 2018

The purpose of this study was to propose a functional improvement solution of integrated control board for safe driving of Smart electric wheelchair for a single person. In the case of existing electric wheelchair products in Korea and elsewhere, safety-related functions or devices are not included in many cases. Therefore, the incidence of electric wheelchair-related accidents is continuously increasing in the current situation in which the elderly and the disabled people have been continuously increased. However, currently only high and middle-priced products are equipped with basic safety devices in electric wheelchairs, so low-priced products require safety related functions. Therefore, sensing obstacles that the user can not recognize while moving an electric wheelchair and detecting automatically the terrain change to control the motor by developing a smart control platform. This provides an integrated control board that can be applied to various electric wheelchairs for more stable driving.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.114-129
• /
• 1996

This paper describes the whole development phase for the underwater vehicle actuating system with high hydroload torque disturbance. This includes requirement analysis, system modeling, control algorithm design, real time implementation, test and performance evaluations. As for driving control algorithms, fuzzy logic, variable structure and PD(Proportional-Differential) algorithm were designed and implemented on board controller using a single chip microprocessor. Intel 8797. And test and performance evaluation is carried out both single test and wystem integration test. We could confirm the basic performance of actuating system through the single test and gereral developing work of any actuating systems was finished with a single performance test of actuating system without system integration test. But, we suggested that system integration test be needed. System integration test is carried out using G/C HILS(Guidance and Control Hardware-In-the -Loop Simulation) which is constituted flight motion simulator, load simulator, real time host computer and the related subsystems such as inertial navigation system, power supply system and Guidance and Control Computer etc.. The most important practical contribution of this paper is that full system characteristics such as minimal control effort, enhancement of guidance and autopilot performance by the actuating system using G/C HILS technique are investigated. Through full running G/C HILS, in spite of the passing to single tests, some control algorithm resulted in failure as to stability of full system and system time frame.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2E
• /
• pp.58-67
• /
• 1994

Hidden Markov Model (HMM)-based algorithms have been used successfully in many speech recognition systems, especially large vocabulary systems. Although general purpose processors can be employed for the system, they inevitably suffer from the computational complexity and enormous data. Therefore, it is essential for real-time speech recognition to develop specialized hardware to accelerate the recognition steps. This paper concerns with a real-time implementation of an isolated word recognition system based on HMM. The speech recognition system consists of a host computer (PC), a DSP board, and a prototype Viterbi scoring board. The DSP board extracts feature vectors of speech signal. The Viterbi scoring board has been implemented using three field-programmable gate array chips. It employs a hardware-efficient Viterbi scoring architecture and performs the Viterbi algorithm for HMM-based speech recognition. At the clock rate of 10 MHz, the system can update about 100,000 states within a single frame of 10ms.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.283-291
• /
• 1994

This paper describes about the behavior of the Striped mullet (Mugil cephalus) in the setnet by telemetry techniques. The telemetry system consists of a pinger of 50KHz, three omni-directional hydrophones and ultrasonic receivers, a single board computer for the signal processing, two RF transceivers for the data comunication and a personnel computer. The fish tagged the pinger was tracked by the LBL method, and its location was calculated by the hyperbolic method. The fish escaped from sea surface to 7m deep right after release and had been swum near the sea surface after 30 minutes being released. Also, in horizontal movements, the fish stayed long time around the enterance of the square net in setnet, and showed the escaping behavior repeatly. The average speed of the fish was about 0.41m/sec(1.1 times of the body length)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.273-282
• /
• 1994

This paper describes about the behavior of the lseraeli carp (Cyprinus cartio. body length 43cm) and the Red seabream (Chrysophrys major. body length 35cm) aquacultured by telemetry techniques. The telemetry system consists of a pinger of 50kHz, three omni-directional hydrophones and ultrasonic receivers, a single board computer for the signal processing, two RF transceivers for the data communication, and a personnel computer. Those fish tagged the pingers were tracked by the LBL method, and its location was calculated by the hyperbolic method. The average speed of the lsraeli carp was about 1.0 times of the body length in a farming water tank (24$\times$24$\times$1m), and the Red seabream 1.3 times of the body length in a farming raft (10$\times$10$\times$5m). A variation of the speed of the lsraeli carp was higher than the other one.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.263-272
• /
• 1994

The hardware and the software of the prototype telemtry system to monitor the behavior of the fish are designed. This system consistes of five parts I. e. three omni-directional hydrophones, three ultrasonic receivers, a single board computer for the signal processing, two RF transceivers for the data communication, and a personnel computer. The sensitivty of the hydrophones is -170dB(re 1V/$\mu$Pa), the gain and the 3dB receiving bandwidth of the ultrasonic receivers are 115dB and 1500Hz respectively, and the sampling period is 33.3$\mu$sec in the signal processing part. The positioning error of the system using hyperbolic method is estimated to be less than 0.2m in case that the pinger locates inside of the baselines. The perfomance of the system considering a practical use was examined by numerical simulation and a water tank test of a pinger tracking experiment. In results, the system developed in prototype was confirmed that it could be useful for monitoring the behavior of fish in the limited water area.