• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.8
• /
• pp.56-63
• /
• 2010

This work proposes a 12b 100MS/s 0.13um CMOS pipeline ADC for battery-powered mobile video applications such as DVB-Handheld (DVB-H), DVB-Terrestrial (DVB-T), Satellite DMB (SDMB), and Terrestrial DMB (TDMB) requiring high resolution, low power, and small size at high speed. The proposed ADC employs a three-step pipeline architecture to optimize power consumption and chip area at the target resolution and sampling rate. A single shared and switched op-amp for two MDACs removes a memory effect and a switching time delay, resulting in a fast signal settling. A two-step reference selection scheme for the last-stage 6b FLASH ADC reduces power consumption and chip area by 50%. The prototype ADC in a 0.13um 1P7M CMOS technology demonstrates a measured DNL and INL within 0.40LSB and 1.79LSB, respectively. The ADC shows a maximum SNDR of 60.0dB and a maximum SFDR of 72.4dB at 100MS/s, respectively. The ADC with an active die area of 0.92 $mm^2$ consumes 24mW at 1.0V and 100MS/s. The FOM, power/($f_s{\times}2^{ENOB}$), of 0.29pJ/conv. is the lowest of ever reported 12b 100MS/s ADCs.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.165-172
• /
• 2013

Convergence is increasingly prevalent in the IT world which generally refers to the combination of two or more different technologies in a single device. Especially, the spectrum scarcity is becoming a big issue because there are exponential growth of broadcasting and communication systems in the spectrum demand. Cognitive radio (CR) is a convergence technology that is envisaged to solve the problems in wireless networks resulting from the limited available spectrum and the inefficiency in the spectrum usage by exploiting the existing wireless spectrum opportunistically. However, the very process of convergence is likely to expose significant security issues due to the merging of what have been separate services and technologies and also as a result of the introduction of new technologies. The main purpose of this research is focused on devising an adaptive security framework based on carousel for CR networks as a distinct telecommunication convergence application, which are still at the stage of being developed and standardized with the lack of security concerns. The framework uses a secure credential, named as carousel, initialized with the location related information from objects position, which is used to design security mechanisms for supporting privacy and various securities based on it. The proposed adaptive security framework could be used as a security building block for the CR network standards and various convergence applications.

• Journal of the Korean Geographical Society
• /
• v.42 no.2 s.119
• /
• pp.165-176
• /
• 2007

Absolute age of the deposition of 1.3 km-thick Bunthang sequence within the Skardu intermontane basin of the Central Karakoram was determined using radioactive decay of cosmogonic $^{10}Be$ and $^{26}Al$ burial dating. The Bunthang sequence deposited around 2.65 Ma, which is the oldest glaciation in the region. The timing of deposition of the Bunthang sequence is consistent with the previous suggestion that the basin filling took place between Brunhess and Matuyama chrons. Four major sedimentary facies interfinger within the Bunthang sequence: glacial diamict, lacustrine, fluvial and lacustrine facies upward. This sedimentary distinctiveness and the lack of evidence on the faults for alternative pull-apart basin model around the Bunthang sequence, suggest that the depressional basin was formed by deep subglacial erosion during the exrtensive Bunthang Glacial Stage and subsequently the sediments underlain by basal diamict, was quickly deposited by preglacial and paraglacial processes. Temporary ponding of the Indus River due to tectonic uplift in the downstream or blockage by mass movements might make the basin filing more possible. The hypothesis that the single ice sheet developed on the Tibetan Plateau during the global last glacial cycle should be refuted by the existence of the older extensive Bunthang glacier Furthermore, the extensive glaciation during the early Quaternary (and thus progressive decrease in extent with time) suggests that there may have been significant uplift of the Pamir to the west and Himalaya to the south, which would have reduced the penetration of westerlies and Indian summer monsoon and hence moisture supply to the region.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.739-746
• /
• 2008

The aim of this study is finding the optimal design parameters and the optimal operation variables of a reactive distillation column. Different from steady state optimization, dynamic optimization makes it possible considering operation ability as well as design problems at process design step. For performing dynamic optimization, dynamic simulation should be done first. If dynamic simulation is already finished, dynamic optimization can be performed with less effort than that of dynamic simulation.Reactive distillation systems involving reaction and separation in a single unit have the potential to reduce capital and operating costs, particularly when reaction have conversion constraint or when azeotropes exist making conventional separation difficult and expensive. This study here present work on the continuous distillation process, the homogeneous catalyzed esterification of methanol and acetic acid, the synthesis of methyl acetate. Based on an equilibrium stage model of a reactive distillation column a dynamic optimization problem was formulated and solved. And the results were verified by performing dynamic simulation and showing the variation of conversion and purity as the variation of the operation variables. As the results of dynamic optimization, this study found optimal feed ratio, reflux ratio and reboiler duty of this system. And as this study applied it to dynamic simulations the dynamic characteristics of a reactive distillation column are showed under optimal operating condition.

• Management & Information Systems Review
• /
• v.39 no.1
• /
• pp.75-91
• /
• 2020

The purpose of this study is to examine the application of in-depth interviews in terms of exploration on the basis of the theoretical basis of various aspects of consumer empathy, and the question of whether the consumer can expand to the process of self empathy. Most studies related to consumer empathy divide the responsive dimension of consumer empathy into rational and emotional dimension based on empathy theory, and look at the empathic response perceived by consumers to the stimulus presented from the current point of view. In this study, however, we want to go one step further and confirm that the consumers themselves can ultimately go to the self-empathy stage by forming a creative street of reproduction and redevelopment. As a result of exploratory research through in-depth interviews, it was indirectly confirmed that consumer's empathetic response to specific marketing stimulus exists at the level of creative and self-empathetic as well as the emphasis of previous studies. Based on these findings, this study confirmed that consumer empathetic responses could go beyond a single dimension to form a multidimensional structure and move toward an expanded structure of empathic self-creation. This suggests that consumers' empathic responses should be grasped in terms of continuity of empathic responses rather than explained in a specific dimension. Although this study is meaningful as an early research of exploratory nature, it is necessary to supplement various content validity and refine the research method through subsequent studies. This study is expected to expand the understanding that consumer's empathy can be extended to other people's empathy and to be self-empathy.

• Structural Engineering and Mechanics
• /
• v.31 no.2
• /
• pp.181-210
• /
• 2009

This paper presents the theoretical developments of an exact finite strip for the buckling and initial post-buckling analyses of isotropic flat plates. The so-called exact finite strip is assumed to be simply supported out-of-plane at the loaded ends. The strip is developed based on the concept that it is effectively a plate. The present method, which is designated by the name Full-analytical Finite Strip Method in this paper, provides an efficient and extremely accurate buckling solution. In the development process, the Von-Karman's equilibrium equation is solved exactly to obtain the buckling loads and the corresponding form of out-of-plane buckling deflection modes. The investigation of thin flat plate buckling behavior is then extended to an initial post-buckling study with the assumption that the deflected form immediately after the buckling is the same as that obtained for the buckling. It is noted that in the present method, only one of the calculated out-of-plane buckling deflection modes, corresponding to the lowest buckling load, i.e., the first mode is used for the initial post-buckling study. Thus, the postbuckling study is effectively a single-term analysis, which is attempted by utilizing the so-called semi-energy method. In this method, the Von-Karman's compatibility equation governing the behavior of isotropic flat plates is used together with a consideration of the total strain energy of the plate. Through the solution of the compatibility equation, the in-plane displacement functions which are themselves related to the Airy stress function are developed in terms of the unknown coefficient in the assumed out-of-plane deflection function. These in-plane and out-of-plane deflected functions are then substituted in the total strain energy expressions and the theorem of minimum total potential energy is applied to solve for the unknown coefficient. The developed method is subsequently applied to analyze the initial postbuckling behavior of some representative thin flat plates for which the results are also obtained through the application of a semi-analytical finite strip method. Through the comparison of the results and the appropriate discussion, the knowledge of the level of capability of the developed method is significantly promoted.

• The Korean Journal of Zoology
• /
• v.39 no.4
• /
• pp.426-436
• /
• 1996

In previous studies, we have shown that lysosomal add phosphatase (LAP) activity increases at the dedifferentiation stage in the regenerating larval limbs of salamander, Hynobius leechii. Monoclonal antibodies against LAP were generated to determIne the spatial and temporal distribution of the protein In the regenerates.A total of 22 monoclonal antihodies recognizIng different epftopes of the protein were obtained, of which five strongly stained the regenerating limb by imunohistochemistry. in LAP immunohistochemical examination, LAP showed distribution coincident with the state of dedifferentiation, both spatially and temporally, in the limb regenerates. When unfractioned protein of regenerating salamander limbs were separated by gel electrophoresis and immunoblotted, the antibodies recognized a single protein band of 53 kl)a, which comigrates with a monomerlc subunit of IAR Using the anti-IAP antibodIes as probe, we investigated the cross-reactivities of LAPs from other sources. The immunoreadive bands on Western blots appeared to be the same In molecular mass-53 kl)a in axoloti and Xenopus, but no protein band was detected in mouse, Drosophila, or C. elegans.These results show that the antibodies generated in this study spedfically recognize Hynoblus leeclili IAp and that IAPs may be highiy conserved among amphibians. Furthermore, the distdbution of the protein is consistent with a role for LAP in the dedifferentiation process of limb regeneration.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.51-57
• /
• 2010

A CMOS rail-to-rail high voltage buffer amplifier is proposed to drive the gamma correction reference voltage of large TFT LCD panels. It is operating by a single supply and only shows current consumption of 0.5mA at 18V power supply voltage. The circuit is designed to drive the gamma correction voltage of 8-bit or 10-bit high resolution TFT LCD panels. The buffer has high slew rate, 0.5mA static current and 1k$\Omega$ resistive and capacitive load driving capability. Also, it offers wide supply range, offset voltages below 50mV at 5mA constant output current, and below 2.5mV input referred offset voltage. To achieve wide-swing input and output dynamic range, current mirrored n-channel differential amplifier, p-channel differential amplifier, a class-AB push-pull output stage and a input level detector using hysteresis comparator are applied. The proposed circuit is realized in a high voltage 0.18um 18V CMOS process technology for display driver IC. The circuit operates at supply voltages from 8V to 18V.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.4
• /
• pp.292-296
• /
• 2000

Mechenochemical reaction by planetary type ball mill is applied to prepare $Sm_2$$Fe_{17}$$N_{x}$ permanent magnet powders. Starting from pure samarium and iron powders, the formation process of hard magnetic $Sm_2$$Fe_{17}$$N_{x}$ phase by ball milling and a subsequent solid state reaction were studied. At as-milled stage powders were found to consist of amorphous Sm-Fe and $\alpha$-Fe phases in all composition of $Sm_2$$Fe_{100-x}$(x = 11, 13, 15). The dependence of starting composition of elemental powder on the formation of Sm-Fe intermetallic compound was investigated by heat treatment of as-milled powders. When Sm concentration was 15 at%, heat-treated powder consists of mostly $Sm_2$$Fe_{17}$$N_{x}$single phase. For synthesizing of hard magnetic $Sm_2$$Fe_{17}$$N_{x}$ compound, additional nitriding treatment was carried out under $N_2$gas atmosphere at $450^{\circ}C$. The increase in the coercivity and remanence was parallel to the nitrogen content which increased drastically at first and then gradually as the nitriding time was extended. The ball-milled Sm-Fe-N powders were expected to be prospective materials for synthesizing of permanent magnet with high performance.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.10
• /
• pp.569-578
• /
• 2003

Data dependencies are one of major hurdles to limit ILP(Instruction Level Parallelism), so several related works have suggested that the limit imposed by data dependencies can be overcome to some extent with use of the data value prediction. Hybrid value predictor can obtain the high prediction accuracy using advantages of various predictors, but it has a defect that same instruction has overlapping entries in all predictor. In this paper, we propose a new hybrid value predictor which achieves high performance by using the information of static and dynamic classification. The proposed predictor can enhance the prediction accuracy and efficiently decrease the prediction table size of predictor, because it allocates each instruction into single best-suited predictor during the fetch stage by using the information of static classification. Also, it can enhance the prediction accuracy because it selects a best- suited prediction method for the “Unknown”pattern instructions by using the dynamic classification mechanism. Simulation results based on the SimpleScalar/PISA tool set and the SPECint95 benchmarks show the average correct prediction rate of 85.1% by using the static classification mechanism. Also, we achieve the average correction prediction rate of 87.6% by using static and dynamic classification mechanism.