Abstract
A CMOS rail-to-rail high voltage buffer amplifier is proposed to drive the gamma correction reference voltage of large TFT LCD panels. It is operating by a single supply and only shows current consumption of 0.5mA at 18V power supply voltage. The circuit is designed to drive the gamma correction voltage of 8-bit or 10-bit high resolution TFT LCD panels. The buffer has high slew rate, 0.5mA static current and 1k$\Omega$ resistive and capacitive load driving capability. Also, it offers wide supply range, offset voltages below 50mV at 5mA constant output current, and below 2.5mV input referred offset voltage. To achieve wide-swing input and output dynamic range, current mirrored n-channel differential amplifier, p-channel differential amplifier, a class-AB push-pull output stage and a input level detector using hysteresis comparator are applied. The proposed circuit is realized in a high voltage 0.18um 18V CMOS process technology for display driver IC. The circuit operates at supply voltages from 8V to 18V.
대형 TFT LCD 판넬의 감마보정전압을 구동하기 위한 레일-투-레일 고전압 CMOS 완충 증폭기를 제안하였다. 이 회로는 단일 전압하에서 동작하고 18V 전압원에서 0.5mA 의 전류소비특성을 나타내며 8비트/10비트 고해상도 TFT LCD 판넬의 감마보정 전압 구동을 위하여 설계하였다. 이 회로는 높은 slew rate, 0.5mA의 정적 전류특성을 나타내며 1k$\Omega$의 저항성/용량성 부하구동 능력을 가지고 있다. 또한 넓은 출력 공급범위를 지니며, 5mA의 출력 정전류를 내보낼 경우 50mV미만의 옵셋전압 특성을 가진다. 또한, 용량성 부하 구동시 입력기준 옵셋전압이 2.5mV 미만인 좋은 특성을 나타낸다. 본 논문에서는 넓은 스윙입력범위와 출력 동작 범위을 얻기 위해 전류미러형 n-채널 차동증폭기, p-채널 차동증폭기, AB-급 푸쉬-풀 출력단, 히스테리시스 비교기를 사용한 입력레벨 검출기 등을 사용하였다. 제안된 회로는 고전압 디스플레이 구동 IC에 사용하기 위해 0.18um 18V 고전압 CMOS 공정기술에 의해 제작되었다. 제안된 회로는 8~18V의 공급 전압 범위에서 동작한다.