• 제목/요약/키워드: Single Sensor

검색결과 1,577건 처리시간 0.031초

CdZnTe 검출기를 이용한 개인용 Pocket Surveymeter의 제작 및 특성 (Development and Testing of CdZnTe Detector for Pocket Surveymeter)

  • 이홍규;강영일;최명진;왕진석;김병태
    • Journal of Radiation Protection and Research
    • /
    • 제21권1호
    • /
    • pp.1-7
    • /
    • 1996
  • 본 논문에서는 bulk형 CdZnTe 감마선 검출기의 제작과 이를 이용한 개인용 선량율계의 제작 및 그 특성에 관하여 기술하였다. 감마선 검출기는 고압 Bridgman법으로 성장된 비저항이 $10^9ohm-cm$이상인 단결정을 사용하였으며 electroless deposition법으로 금전극을 형성시켜 사용하였다. 제작된 CdZnTe 검출기는 $^{109}Cd$의 22.2 keV 감마선과 $^{241}Am$의 59.6 keV 감마선에 대하여 상온에서 각각 4.8keV와 2.2keV의 분해능을 보였다. 또한 이 검출기를 이용하여 개인용 선량율계를 제작하였는데 662keV의 $^{l37}Cs$의 감마선에 대하여 1mR/hr에서 10R/hr의 선율에서 변동율 5%이하의 좋은 직진성을 보였고 온도변화 및 조사선율의 각도분포에 대하여도 좋은 응답 특성을 보였다.

  • PDF

Hand Gesture Segmentation Method using a Wrist-Worn Wearable Device

  • Lee, Dong-Woo;Son, Yong-Ki;Kim, Bae-Sun;Kim, Minkyu;Jeong, Hyun-Tae;Cho, Il-Yeon
    • 대한인간공학회지
    • /
    • 제34권5호
    • /
    • pp.541-548
    • /
    • 2015
  • Objective: We introduce a hand gesture segmentation method using a wrist-worn wearable device which can recognize simple gestures of clenching and unclenching ones' fist. Background: There are many types of smart watches and fitness bands in the markets. And most of them already adopt a gesture interaction to provide ease of use. However, there are many cases in which the malfunction is difficult to distinguish between the user's gesture commands and user's daily life motion. It is needed to develop a simple and clear gesture segmentation method to improve the gesture interaction performance. Method: At first, we defined the gestures of making a fist (start of gesture command) and opening one's fist (end of gesture command) as segmentation gestures to distinguish a gesture. The gestures of clenching and unclenching one's fist are simple and intuitive. And we also designed a single gesture consisting of a set of making a fist, a command gesture, and opening one's fist in order. To detect segmentation gestures at the bottom of the wrist, we used a wrist strap on which an array of infrared sensors (emitters and receivers) were mounted. When a user takes gestures of making a fist and opening one's a fist, this changes the shape of the bottom of the wrist, and simultaneously changes the reflected amount of the infrared light detected by the receiver sensor. Results: An experiment was conducted in order to evaluate gesture segmentation performance. 12 participants took part in the experiment: 10 males, and 2 females with an average age of 38. The recognition rates of the segmentation gestures, clenching and unclenching one's fist, are 99.58% and 100%, respectively. Conclusion: Through the experiment, we have evaluated gesture segmentation performance and its usability. The experimental results show a potential for our suggested segmentation method in the future. Application: The results of this study can be used to develop guidelines to prevent injury in auto workers at mission assembly plants.

물/1,2-Dichloroethane 계면에서 Cefotiam 약물 이온의 전이 반응 연구 및 약물 센서에 응용 (Electrochemical Study on Transfer Reaction of Ionizable Cefotiam across a Water/1,2-dichloroethane Interface and Drug Sensing Applications)

  • 리우샤오원;신타제시카;이혜진
    • 공업화학
    • /
    • 제29권5호
    • /
    • pp.581-588
    • /
    • 2018
  • 본 논문은 편극화된 물/1,2-dichloroethane (1,2-DCE) 계면에서 세포티암(cefotiam, CTM) 항생제 약물의 전이 반응을 전기화학적 방법으로 조사하였다. CTM 약물은 물의 pH에 따라 서로 다른 전하를 가지고 이온화되며 각 pH에서 이들 이온의 전이 반응을 연구함으로써 처음으로 CTM 약물이 좀 더 우세하게 물 또는 유기층에 분배되는 정도를 나타내는 상 분배 도표를 세웠다. 이를 바탕으로 CTM 약물의 형식 전이 전위값 및 형식 Gibbs 전이 에너지 값을 포함한 열역학적 정보와 함께 분배 계수를 포함한 중요한 약물동태학 정보를 얻었다. 특히 pH 3.0 수용액에서 양전하를 띠는 CTM 이온의 전이 반응을 순환전압전류법으로 조사한 결과 CTM 농도에 따라 측정한 전류 값이 비례하여 증가한다는 점을 확인하였다. 이를 바탕으로 CTM 이온을 정량 분석 가능한 센서를 개발하였다. 휴대성과 이동성을 보완하기 위해 polyethylene terephthalate 필름에 마이크로홀을 만들어 지지체로 사용하고, 1,2-DCE 유기용매를 polyvinylchloride-2-nitrophenyloctylether (PVC-NPOE) 유기성 젤로 대체하여 도포하는 방식으로 센서를 제작하였다. 상기 센서를 이용하여 CTM 약물을 $1{\mu}M$에서 $10{\mu}M$까지 정량 분석할 수 있었다.

스퀴드 심자도 장치를 이용한 심방성 부정맥의 측정 (Detection of Rapid Atrial Arrhythmias in SQUID Magnetocardiography)

  • 김기웅;권혁찬;김기담;이용호;김진목;김인선;임현균;박용기;김두상;임승평
    • Progress in Superconductivity
    • /
    • 제7권1호
    • /
    • pp.28-35
    • /
    • 2005
  • We propose a method to measure atrial arrhythmias (AA) such as atrial fibrillation (Afb) and atrial flutter (Afl) with a SQUID magnetocardiograph (MCG) system. To detect AA is one of challenging topics in MCG. As the AA generally have irregular rhythm and atrio-ventricular conduction, the MCG signal cannot be improved by QRS averaging; therefore a SQUID MCG system having a high SNR is required to measure informative atrial excitation with a single scan. In the case of Afb, diminished f waves are much smaller than normal P waves because the sources are usually located on the posterior wall of the heart. In this study, we utilize an MCG system measuring tangential field components, which is known to be more sensitive to a deeper current source. The average noise spectral density of the whole system in a magnetic shielded room was $10\;fT/{\surd}Hz(a)\;1\;Hz\;and\;5\;fT/{\surd}Hz\;(a)\;100\;Hz$. We measured the MCG signals of patients with chronic Afb and Afl. Before the AA measurement, the comparison between the measurements in supine and prone positions for P waves has been conducted and the experiment gave a result that the supine position is more suitable to measure the atrial excitation. Therefore, the AA was measured in subject's supine position. Clinical potential of AA measurement in MCG is to find an aspect of a reentry circuit and to localize the abnormal stimulation noninvasively. To give useful information about the abnormal excitation, we have developed a method, separative synthetic aperture magnetometry (sSAM). The basic idea of sSAM is to visualize current source distribution corresponding to the atrial excitation, which are separated from the ventricular excitation and the Gaussian sensor noises. By using sSAM, we localized the source of an Afl successfully.

  • PDF

다중분광 및 다중시기 영상자료 통합을 통한 토지피복분류 갱신 (Updating Land Cover Classification Using Integration of Multi-Spectral and Temporal Remotely Sensed Data)

  • 장동호
    • 대한지리학회지
    • /
    • 제39권5호
    • /
    • pp.786-803
    • /
    • 2004
  • 최근, 다중 센서 영상과 GIS 주제도 정보를 이용한 토지 피복 분류에 대해 관심이 증가하고 있는 추세이다. 그러나. 분류에 필요한 효과적인 GIS 정보를 충분히 보유하고 있음에도 불구하고, 최대우도법(MLE) 같은 전통적인 방법은 기존의 컴퓨터 프로그램들이 GTS 자료를 제대로 다룰 수 없다는 이유로 유용한 정보의 이용에 제한을 받아 왔다. 본 연구에서는 다중 파장대 및 다중 시기 영상을 이용하여 새로운 영상 분류기법을 제안하고자 한다. 특히 MLE기법을 확대하여 다중 스펙트럼 영상 자료 및 토지 피복 분류 자료 등을 함께 사용할 수 있도록 하였다. 또한 파라미터가 데이터에서 추정되는 경우 우도비(LRE) 추정법이 오히려 더 적합할 수 있어서 LRE기법도 함께 사용하였다. 연구 지역은 서해안 안면도 지역이며, 자료는 Landsat ETM+ 영상과 Landsat TM 영상을 이용하여 만든 토지 피복도이다. 연구 결과. 제안된 방법은 단일 스펙트럼 자료를 사용하는 것보다 현저히 개선된 분류 정확도를 나타낸다. 즉, 개선된 분류 영상들은. MLE를 사용했을 때는 $6.2\%$, LRE를 사용했을 때는 $9.2\%$의 분류 정확도 개선을 보였다. 또한 본 연구는 제시된 알고리즘이 토지 피복 변화에 따른 그 지역의 변화 지역 추출도 가능할 것으로 판단된다. 향후 토지피복 분류 결과는 실 세계에서 보다 정확한 의사결정을 위한 보완적인 자료로써 유용하게 사용될 수 있을 것이라는 판단된다.

초음파 도플러를 이용한 음성 인식 (Automatic speech recognition using acoustic doppler signal)

  • 이기승
    • 한국음향학회지
    • /
    • 제35권1호
    • /
    • pp.74-82
    • /
    • 2016
  • 본 논문에서는 음성 신호 대신 초음파 도플러 신호를 이용하여 음성을 인식하는 새로운 음성 인식 방법을 제안하였다. 제안된 방법은 주변 잡음에 대한 강인성과 무 접촉식 센서 사용에 따른 사용자의 불편함 감소를 포함하는 기존의 음성/무음성 인식 방법에 비해 몇 가지 장점을 갖는다. 제안된 방법에서는 40 kHz의 주파수를 갖는 초음파 신호를 입 주변에 방사하여, 반사된 신호를 취득하고, 취득된 신호의 도플러 주파수 변화를 이용하여 음성 인식을 구현하였다. 단일 채널 초음파 신호를 사용하는 기존의 연구와 달리, 다양한 위치에서의 취득된 초음파 신호를 음성 인식에 사용하기 위해 다채널 취득 장치를 고안하였다. PCA(Principal Component Analysis)특징 변수를 사용한 음성 인식에는 좌-우 모델을 갖는 은닉 마코프 모델을 사용하였다. 제안된 방법의 검증을 위해 60개의 한국어 고립어에 대해 6명의 화자로부터 취득된 초음파 도플러 신호를 인식에 사용하였으며, 기존 음성기반 음성인식 기법과 비교할 만한 수준의 인식율을 얻을 수 있었다. 또한 실험 결과 제안된 방법은 기존의 단일 채널 음성 인식 방법과 비교하여 우수한 성능을 나타내었으며, 특히 잡음 환경에서도 90 % 이상의 인식율을 얻을 수 있었다.

가상현실에서 표출된 라이드필름 제작 사례연구 - Warrior of the Dawn 제작사례를 중심 - (A Study on the Ride Film Appearing in Virtual Reality - the focus of Warrior of the Dawn -)

  • 김태형;정진헌
    • 한국멀티미디어학회논문지
    • /
    • 제11권9호
    • /
    • pp.1204-1212
    • /
    • 2008
  • 가상현실은 1920년대 vehiclesimula-tion(fight simulator)을 효시로 하여 정밀한 광학적/전자기적 장치의 발달로 군사적 목적 이외의 범위로 발전하기 시작하여 realistic display 기술을 선두로 오락, 의료, 학습, 영화, 건축설계, 관광 등 다양한 분야에서 점점 일반화 되어 지고 있다. 1989년 재론 래니어에 의해 가상현실이란 용어가 고안되었고, 모든 가상 프로젝트들을 하나의 단일 항목으로 묶을 수 있게 되었지만, 그 이전에 가상현실은 연구 되어져왔고 현재에 이르게 되었으며, 불가능한 것에 대한 새로운 경험은 인간에게 가상현실의 한 부문으로써 라이드필름을 개발하게 하였다. 라이드필름(Ride Film)의 어트랙션은 기술적 요소뿐만 아니라 인간의 심리적 기반을 분석하여 그 토대로 구성되어지며, 가상현실의 궁극적인 원칙은 상호작용에 의한 몰입이다. 진정한 상호작용은 인터페이스와 입력센서 그리고 반응능력을 요구하는데, 라이드필름(Ride Film)은 전형적인 상호작용성의 요소는 아니다. 따라서 본 연구는 가상현실 기반에서 연구되어온 기술 중심적 입장 외에, 경험 중심적 정의 측면에서 사이버상의 철학자라 불리 우는 마이클 하임 교수의 7가지 기초 개념, 즉 인공현실 / 상호작용 / 몰입 / 망으로 연결된 세계 / 원격현전 /시뮬레이션 / 온몬 몰입에 근거하여 가상현실로서의 적합성을 대입 분석해 보고, 완전한 몰입을 위한 라이드필름(Ride Film)의 발전 방향과 최적화된 결론을 도출하는데 목적을 두고 있다. 이런 관점에서 라이드필름(Ride Film)의 연구는 선례연구가 부족한 라이드필름(Ride Film)의 선행연구로써의 기틀과 디지털 영상을 한 차원 발전시키는데 기여할 것이라 여긴다.

  • PDF

최적화된 큐에서의 NMEA 멀티플렉서의 설계 및 구현 (Design and Implementation of NMEA Multiplexer in the Optimized Queue)

  • 김창수;정성훈;임재홍
    • 한국항해항만학회지
    • /
    • 제29권1호
    • /
    • pp.91-96
    • /
    • 2005
  • 현재 국내에서는 NMEA 멀티플렉서를 개발한 사례 띤 제품이 몇몇 업체가 있으나, 외국 제품보다 인지도 및 제품판매의 실적이 미비하다. 그러므로 외국의 고비용 장비를 수입하여 사용하거나, 멀티 포트를 이용하여 NMEA 신호를 전송하는 프로그램을 소프트웨어적으로 구현하여 사용하고 있다. 그러므로 고비용이 지출되거나, 각 응용프로그램마다 별도의 처리 부분을 작성해야하는 문제점이 있다. 또한, NMEA 신호를 출력하는 각각의 장비들은 제조회사 및 플랫폼이 다르므로 이중의 자원낭비 및 손실 등을 초래할 수 있다. 본 논문에서는 경제적으로 NMEA 멀티플렉서 모듈을 구현하기 위하여 가상 시스템을 구성하여 실험을 실시하였다. NMEA 신호를 입력하기 위해 각 장비들은 가상의 데이터를 가진 노드로 대치하여 멀티플렉서 구현을 위한 가상의 시스템을 구성하고, 여러 문제들을 보완하기 위하여 신뢰성 있는 처리방법과 고성능의 단일 하드웨어 모듈로서 독립적으로 동작할 수 있다. 최적화된 큐의 설계를 이용하여 모듈의 메모리 효율을 높이며, 주요 항해 장비인 자이로콤파스, 에코 사운드, GPS 등과 실시간으로 RS232 멀티포트를 통하여 입력되는 신호를 실제 PC에서 출력하여 통신의 정확성을 유지할 수 있는 NMEA 멀티플렉서의 설계 및 구현에 대하여 제안하였다.

Improved Physical Properties of Ni-doped $BiFeO_3$ Ceramic

  • Yoo, Y.J.;Park, J.S.;Kang, J.H.;Kim, J.;Lee, B.W.;Kim, K.W.;Lee, Y.P.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.250-250
    • /
    • 2012
  • Recently, multiferroic materials have attracted much attention due to their fascinating fundamental physical properties and potential technological applications in magnetic/ferroelectric data storage systems, quantum electromagnets, spintronics, and sensor devices. Among single-phase multiferroic materials, $BiFeO_3$, in particular, has received considerable attention because of its very interesting magnetoelectric properties for application to spintronics. Enhanced ferromagnetism was found by Fe-site ion substitution with magnetic ions. In this study, $BiFe_{1-x}Ni_xO_3$ (x=0 and 0.05) bulk ceramic compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Fe_3O_4$ and NiO powders were mixed with the stoichiometric proportions, and calcined at $450^{\circ}C$ for 24 h to produce $BiFe_{1-x}Ni_xO_3$. Then, the samples were directly put into the oven, which was heated up to $800^{\circ}C$ and sintered in air for 20 min. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The Raman measurements were carried out with a Raman spectrometer with 514.5-nm-excitation Ar+-laser source under air ambient condition on a focused area of $1-{\mu}m$ diameter. The field-dependent magnetization and the temperature-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The x-ray diffraction study demonstrates the compressive stress due to Ni substitution at the Fe site. $BiFe_{0.95}Ni_{0.05}O_3$ exhibits the rhombohedral perovskite structure R3c, similar to $BiFeO_3$. The lattice constant of $BiFe_{0.95}Ni_{0.05}O_3$ is smaller than of $BiFeO_3$ because of the smaller ionic radius of Ni3+ than that of Fe3+. The field-dependent magnetization of $BiFe_{0.95}Ni_{0.05}O_3$ exhibits a clear hysteresis loop at 300 K. The magnetic properties of $BiFe_{0.95}Ni_{0.05}O_3$ were improved at room temperature because of the existence of structurally compressive stress.

  • PDF

능동 윤곽 기법을 적용한 단일 영상 기반 인공위성 상대항법 (Mono-Vision Based Satellite Relative Navigation Using Active Contour Method)

  • 김상현;최한림;심현철
    • 한국항공우주학회지
    • /
    • 제43권10호
    • /
    • pp.902-909
    • /
    • 2015
  • 본 논문에서는 인공위성 근접운용을 위한 단일 영상 기반 상대항법에 대한 연구를 수행하였다. 추적 위성은 하나의 카메라 센서만을 이용하여 표적 위성을 관측하고 영상추적을 통해 표적 위성의 위치 정보를 얻게 된다. 그러나 단일 영상만을 이용할 경우, 표적과의 상대 거리에 해당하는 깊이 정보를 얻기 힘들다. 이러한 문제를 해결하기 위해 능동 윤곽 기법을 영상 추적에 적용하였다. 능동 윤곽 기법을 통해 표적의 이미지 크기를 얻을 수 있고 이러한 형상 정보를 바탕으로 상대 거리를 간접적으로 계산할 수 있다. 두 인공 위성이 상대 운동을 하는 우주환경을 구현하고 가상의 카메라 영상을 생성하기 위해 3차원 가상현실이 이용되었다. 추적 위성은 UKF를 이용하여 표적 위성에 대한 상대위치를 추정하면서 글라이드슬로프 접근 기법을 이용하여 표적 위성에 근접한다. 상대항법의 성능을 분석하기 위해서 폐 루프 시뮬레이션을 수행하였다.