• Journal of Electrical Engineering and information Science
• /
• 제2권6호
• /
• pp.28-35
• /
• 1997

A new approach concurrent transistor sizing and buffer insertion for low power optimization is proposed in this paper. The method considers the tradeoff between upsizing transistors and inserting buffers and chooses the solution with the lowest possible power and area cost. It operates by analyzing the feasible region of the cost-delay curves of the unbuffered and buffered circuits. As such the feasible region of circuits optimized by our method is extended to encompass the envelop of cost-delay curves which represent the union of the feasible regions of all buffered ad unbuffered versions of the circuit. The method is efficient and tunable in that optimality can be traded for compute time and as a result it can in theory near optimal results.

• ETRI Journal
• /
• 제38권5호
• /
• pp.941-951
• /
• 2016

In this paper, cognitive radio and simultaneous wireless information and power transfer (SWIPT) are effectively combined to design a spectrum-efficient and energy-efficient transmission paradigm. Specifically, a novel SWIPT-based primary-secondary cooperation model is proposed to increase the transmission rate of energy/spectrum constrained users. In the proposed model, a multi-antenna secondary user conducts simultaneous energy harvesting and information forwarding by means of power splitting (PS), and tries to maximize its own transmission rate under the premise of successfully assisting the data delivery of the primary user. After the problem formulation, joint power splitting and beamforming optimization algorithms for decode-and-forward and amplify-and-forward modes are presented, in which we obtain the optimal PS factor and beamforming vectors using a golden search method and dual methods. Simulation results show that the proposed SWIPTbased primary-secondary cooperation schemes can obtain a much higher level of performance than that of non-SWIPT cooperation and non-cooperation schemes.

• Food Science and Preservation
• /
• 제13권5호
• /
• pp.623-628
• /
• 2006

This study was performed to develop extract materials from Elsholtzia splendens by analyzing the functionality and aroma profile by the simultaneous steam distillation extraction. The qualities of extracts such as total yield, total phenolic compound and electron donation ability were affected by extraction temperature than time. The main flavor compounds were analyzed as estragole, thymol and beta-caryophyllene. The response variables had significant with extraction temperature than tim. The established model was suitable to predict calculated value in experimental ranges. The optimum extinction conditions, which were limited of maximum value for dependent variables were $108^{\circ}C$ and 2.1 hr in the simultaneous steam distillation extraction method.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제2권4호
• /
• pp.207-223
• /
• 2015

In this paper a method for simultaneous swift non-linear analysis and optimal design/posture of mechanical/biomechanical systems is presented. The method is developed to get advantages of iterations in non-linear analysis and/or generations in genetic algorithm (GA) for the purpose of efficient analysis within the optimal design/posture. The method is applicable for both size and geometry optimizations wherein material and geometry non-linearity are present. In addition to established mechanical systems, the method can solve biomechanical models of human musculoskeletal system. Optimization-based procedures are popular methods for resolving the redundancy at joints wherein the number of unknown muscle forces is far more than the number of equilibrium equations. These procedures involve optimization of a cost function(s) which is assumed to be consistent with the central nervous system's strategy when activating muscles to assure equilibrium. However, because of the complexity of biomechanical problems (i.e., due to non-linear biomaterial, large deformation, redundancy of the problem and so on) efficient analysis are required within optimization procedures as suggested in this paper.

• Journal of the Korean Society for Precision Engineering
• /
• 제19권10호
• /
• pp.120-129
• /
• 2002

An integrated structure and controller design approach for rotating cantilever beam is presented. An optimization method is developed for improving positioning performance considering the elastic deformations during high speed rotation and adopting the beam shape and the control gains as design variables. For this end, a dynamic model is setup by the finite element method according to the shape of the beam. The mass and stiffness of the beam are distributed in such a way that the closed-loop poles of the control system should be located leftmost in the complex s-plane. For optimization method, the simulated annealing method is employed which has higher probability to find the global minimum than the gradient-based down-hill methods. Sequential design and simultaneous design methods are proposed to obtain the optimal shape and controller. Simulations are performed with new designs by the two methods to verify the effectiveness of the approach and the results show that the settling time is improved for point-to-point position controls.

• Computational Structural Engineering
• /
• 제9권3호
• /
• pp.179-186
• /
• 1996

A simple nonlinear programming(NLP) formulation for the optimal topology problem of structures is developed and examined. The NLP formulation is general, and can handle arbitrary objective functions and arbitrary stress, displacement constraints under multiple loading conditions. The formulation is based on simultaneous analysis and design approach to avoid stiffness matrix singularity resulting from zero sizing variables. By embedding the equilibrium equations as equality constraints in the nonlinear programming problem, we avoid constructing and factoring a system stiffness matrix, and hence avoid its singularity. The examples demonstrate that the formulation is effective for finding an optimal solution, and shown to be robust under a variety of constraints.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제36권10호
• /
• pp.947-953
• /
• 2008

MDO(Multidisciplinary Design and Optimization) framework can be an integrated environment or a system, which is for synthetic and simultaneous analysis and design optimization in various design fields of aerospace systems. MDO framework has to efficiently use and integrate distributed resources such as various analysis codes, optimization codes, CAD tools, DBMS and etc. in heterogeneous environment, and to provide graphical and easy-to-use user interfaces. Also, its development method can be changed by design objects and development environment. In this paper, we classify MDO frameworks into three types according to the development environments: Single PC-based, PLinda-based and Web Services-based MDO framework. And, we compare and analyze these frameworks.

• Wind and Structures
• /
• 제34권3호
• /
• pp.291-301
• /
• 2022

Although mostly used in wind turbine market, single rotor wind turbines have problems with transportation and installation costs due to their large size. In order to solve such problems, multi-rotor wind turbine is being proposed; however, light weight design of multi-rotor wind turbine is required considering the installation at offshore or deep sea. This study proposes the systematic design process of the multi-rotor wind turbine focused on its supporting structure with simultaneous consideration of static and dynamic behaviors in an ideal situation. 2D and successive 3D topology optimization process based on the density method were applied to minimize the compliance of supporting structure. To realize the conceptual design obtained by topology optimization for manufacturing feasibility, the derived 3D structure was modified to have shell structures and optimized again through parametric design using the design of experiments and the response surface method for detail design of their thicknesses and radii. The resultant structure was determined to satisfy the stress and the buckling load constraint as well as to minimize the weight and the resultant supporting structure were verified numerically.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.229-233
• /
• 1990

A new on-line optimization technique of a distillation column is presented. The equation decoupling method and the simultaneous solution method are combined to simulate the distillation process. The storage requirement is small enough to run on a PC. A improved successive quadratic programming is used to find the optimum operating conditions. The optimizer is intensively tested by using the dynamic simulator, SPEEDUP. After this, the technique is applied to a binary distillation column that treats methanol and water.

• Mass Spectrometry Letters
• /
• 제5권1호
• /
• pp.30-33
• /
• 2014

A solid phase extraction (SPE) method was optimized for the quantitative analysis of perfluorooctanoic acid (PFOA) in serum using hydrophilic-lipophilic balance SPE and LC-MS/MS. Fetal bovine serums spiked with $^{13}C_8$-PFOA before or after SPE were used as test samples for evaluation of the SPE efficiency. Simultaneous evaluation of matrix effects and absolute SPE recovery for $^{13}C_8$-PFOA in serum using different sample pre-treatments and SPE conditions allowed optimization of SPE process efficiency with minimal matrix effect and decent SPE recovery. Introduction of protein precipitation as a sample pre-treatment procedure for serum samples before SPE generally decreased matrix effect in LC-MS/MS analysis and provided more stable recovery of PFOA.