• Computers and Concrete
• /
• v.4 no.4
• /
• pp.273-284
• /
• 2007

The paper considers a theoretical model for the study of the process of transfer of sulfate ions in saturated porous media - mineral composites. In its turn, the model treats diffusion of sulfate ions into cement based composites, accounting for simultaneous effects such as filling of micro-capillaries with ions and chemical products and liquid push out of them. The proposed numerical algorithm enables one to account for those simultaneous effects, as well as to model the diffusive behavior of separate sections of the considered volume, such as inert fillers. The cases studied illustrate the capabilities of the proposed model and those of the algorithm developed to study diffusion, considering the specimen complex configuration. Computations show that the theoretical assumptions enable one to qualitatively estimate the experimental evidence and the capabilities of the studied composite. The results found can be used to both assess the sulfate corrosion in saturated systems and predict and estimate damage of structures built of cement-based mineral composites.

• Asian Journal for Public Opinion Research
• /
• v.5 no.4
• /
• pp.266-284
• /
• 2018

This paper adopts the big data research method, and draws 491 data from the Tianya Forum about the Simultaneous Renting and Purchasing policy of Guangzhou. The qualitative analysis software Nvivo11 is used to cluster the main questions about the Simultaneous Renting and Purchasing policy in the forum. The 36 high-frequency word frequencies are obtained through text clustering. Through rooted theory analysis, the main driving factors for summarizing people's doubts are 9 main categories, 3 core categories, and the model of driving factors for online forums is established. The study finds that resource factors are the most key factor, economic factors are the important drivers, and policy guiding factors are sub-important drivers.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.34-41
• /
• 2011

This paper presents a frequency-response test performed on an antagonistic actuation system consisting of two Mckibben pneumatic artificial muscles and a pneumatic circuit. A linear model, capable of estimating the dynamic characteristics of the antagonistic system in the operating range of pneumatic artificial muscles, was optimally calculated based on frequency-response results and applied to a multiple simultaneous specification control scheme. Trajectory tracking results showed that the presented multiple simultaneous specification controller, built experimentally by three PD typed sample controllers, satisfied successfully all required control specifications; rising time, maximum overshoot, steady-state error.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3127-3135
• /
• 1994

An approach to the simultaneous optimal design of structure and control system for large free-free flexible beam is presented. The flexible beam is modeled by the finite element method. And the reduced model of small degree of freedom is constructed by use of modal analysis. The tapered beam is considered so that the number of design variables is not dependent on the increasing number of finite elements. The width of several points of tapered beam and control gain are taken as design variables. The shape of beam and control gain are optimized simultaneously for the minimum weight of total structure including control system subject to the constraints of the magnitude of displacement of beam. It is shown that the simultaneous optimal design of structure and control systems is indeed useful.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2069-2074
• /
• 2016

This paper presents a methodology based on evolutionary optimization for simultaneously optimizing design parameters of controller and components of plant. Genetic programming(GP) based bond graph model generation is adopted to open-ended search for the plant. Also GP is applied to represent the controller with a unified method. The formulations of simultaneous plant-controller design optimization problem and the description of solution techniques based on bond graph are derived. A feasible solutions for a plant/controller design using the simultaneous optimization methodology is illustrated.

• The Journal of Korea Robotics Society
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2013

Body gesture Recognition has been one of the interested research field for Human-Robot Interaction(HRI). Most of the conventional body gesture recognition algorithms used Hidden Markov Model(HMM) for modeling gestures which have spatio-temporal variabilities. However, HMM-based algorithms have difficulties excluding meaningless gestures. Besides, it is necessary for conventional body gesture recognition algorithms to perform gesture segmentation first, then sends the extracted gesture to the HMM for gesture recognition. This separated system causes time delay between two continuing gestures to be recognized, and it makes the system inappropriate for continuous gesture recognition. To overcome these two limitations, this paper suggests primitive body model encoding, which performs spatio/temporal quantization of motions from human body model and encodes them into predefined primitive codes for each link of a body model, and Selective/Asynchronous Input-Parallel State machine(SAI-PSM) for multiple-simultaneous gesture recognition. The experimental results showed that the proposed gesture recognition system using primitive body model encoding and SAI-PSM can exclude meaningless gestures well from the continuous body model data, while performing multiple-simultaneous gesture recognition without losing recognition rates compared to the previous HMM-based work.

• STI Policy Review
• /
• v.6 no.1
• /
• pp.1-23
• /
• 2015

Based on the work of Anand et al. (2013) we measure inclusive income growth, which combines growth in gross domestic product (GDP) per capita and growth in the equity of the income distribution. Extending the work of Causa et al. (2014), we estimate a dynamic simultaneous structural equations model of GDP per capita and inclusive income on panel data for 63 countries over the 1990-2013 period. We estimate both equations in error correction form by difference GMM (generalized method of moments). Among the explanatory variables of the level and the distribution of GDP per capita we include R&D (research and development) expenditure per capita. In OECD countries we obtain a large positive effect of R&D on GDP. R&D is found to have a positive effect on the social mobility index but its impact on the income equity index at first decreases, then switches around to become slightly positive in the long run. In non- OECD countries, R&D is found to decrease inclusive income, mostly through a negative growth effect but also because of a slightly increasing income inequity effect.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.21 no.4
• /
• pp.10-20
• /
• 1984

When the hydrodynamic coefficients of the ship maneuvering equation are estimated by captive model test, it is difficult to take account of the scale effect between model and full scale ship. This scale effect problem can be overcome by processing the sea trial data with system identification. Extended Kalman filter is used as a system identification technique for the modification of the simulation equation as well as the estimation of hydrodynamic coefficients The phenomena of simultaneous drifting of linear coefficients occur. It is confirmed that two coefficients in each pair-$(Y_v',\;Y_r'-m'u'),\;(N_v',\;N_r')$-are simultaneously drifting and all 4 coefficients are drifting together. Particularly simultaneous drifting and 2 coefficients in each pair is more significant. It is also shown that the simultaneous drifting of 4 coefficients can be reduced by choosing the input data which have the random v'/r' curve and 4 coefficients are estimated within $2{\sim}4%$ error, which may be noise level. So, it is recommended to operate the rudder randomly in sea trial or model test for the application of system identification technique.

• Journal of the Korean Statistical Society
• /
• v.26 no.4
• /
• pp.429-443
• /
• 1997

We consider the problem of obtaining several types of simultaneous confidence bands for the survival curve under the additive risk model. The derivation uses the weak convergence of normalized cumulative hazard estimator to a mean zero Gaussian process whose distribution can be easily approxomated through simulation. The bands are illustrated by applying them from two well-known clinicla studies. Finally, simulation studies are carried outo to compare the performance of the proposed bands for the survival function under the additive risk model.

• Environmental and Resource Economics Review
• /
• v.12 no.4
• /
• pp.559-577
• /
• 2003

This paper analyzes household bottled water and water purifier expenditures, taking into account three important characteristics: expenditures may be censored at zero, may be interdependent across expenditure type, and may be endogenously and jointly determined. Censoring, interdependence, and endogeneity of the two expenditures are examined through simultaneous equation bivariate Tobit model. Expenditure function parameters are estimated using a 1997 household survey data collected in Seoul. The study detected interdependence between the two expenditures in the data. Moreover, the coefficient of one expenditure variable is statistically significant in the other expenditure equation. Thus, the overall results show that the simultaneous equation bivariate Tobit model employed here is appropriate for this analysis of the two expenditures. Finally estimated income and household size elasticities of the expenditures are presented.