• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.146-153
• /
• 1997

An experiment was conducted to figure out the atomization characteristics of a highly viscous biodiesel fuel with rice-barn oil applying and ultrasonic energy into it. A spray simulator for the droplet atomization, an ultrasonic system, and six different nozzles(3 pintle-type nozzles and 3 single hole-type nozzles) were made. To investigate effects of ultrasonic energy in a highly viscous liquid fuel, an immersion liquid method was used as a measurement method on droplet size distributions. It was found that the ultrasonic energy was effective for the atomization improvement of the rice-bran oil as a highly viscous biodiesel fuel and the factor나 such as the nozzle opening pressure, pin-edge angles, hole diameters, and collection distances affected the atomization of spray droplets.

• 센서학회지
• /
• 제23권2호
• /
• pp.142-147
• /
• 2014

Real time driver's respiration monitoring method for detecting driver's drowsiness is investigated. The sensor to obtain driver's respiration signal was a piezoelectric pressure sensor attached at the abdominal region of the seat belt. The resistance of the pressure sensor was changed according to the pressure applied to the seat belt due to the driver's respiration. Monitoring driver's respiration was carried out by driving on the virtual road in a driving simulator from Cheonan to Seoul and monitoring results were compared to the PELCLOS. Experiment results show that the driver's respiration signal can be used for detecting driver's drowsiness.

• 항공우주기술
• /
• 제10권1호
• /
• pp.70-78
• /
• 2011

일반적으로 압축성과 비압축성에 따라 사용되는 밸브의 유량 관계식은 다르다. 본 논문에서는 유체에 따라 유량 실험에 수행했고, 고유유량계수를 측정했다. 압축성 및 비압축성 유체에 대한 실험 결과, 고유유량계수는 정확히 일치했다. 1/2" 솔레노이드 밸브에 대한 유량실험 결과 고유유량계수는 약 2 이다. 실험을 통해 확보 된 솔레노이드 밸브의 고유유량계수는 아메심으로 모델링하여 밸브의 유동특성을 예측했다.

• Journal of Information Display
• /
• 제3권2호
• /
• pp.13-18
• /
• 2002

Numerical simulation is one of the most useful tools to study gas discharge phenomena that occur in alternating current plasma display panel (AC-PDP) cell. Most PDP cell simulations have been performed for two-dimensional cell, is cross-section along the address electrode. We developed a three-dimensional PDP simulator and applied it to a T-shaped electrode cell in order to show the effects of sustain electrode shape that cannot be included in two-dimensional simulation. The dependence of power consumption on electrode shape and area in the simulation showed the same trend as experiment.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.143-148
• /
• 2011

This paper is about the study on MPPT algorithm of PV module where mismatched solar cells exist. PSIM simulation tool was used to verify new MPPT algorithm and PV module modeling was made. It was verified for the proposed algorithm to track the right MPP of PV boost converter under mismatched condition, which shows a shading effect in PV module. An experiment will be done soon using PV simulator for verification of the proposed algorithm.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.437-440
• /
• 2009

In this paper, an aluminum ring forging process of manufacturing an optimized perform for a hot forging process is simulated using AFDEX 3D, a general-purpose metal forming simulator based on rigid-thermoviscoplastic finite element method. Non-isothermal analysis is carried out and the predictions are compared with the experiments in terms of dimensional accuracy. It was shown that the predictions are in good agreement with the experiments.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.48-56
• /
• 2004

This paper presents the GPS receiver's inherent interference effectiveness based on the receiver's internal processing gain. This research is to verify the weakness of the GPS satellite signals and evaluate the receiver's vulnerability in an interference situation. The experiment for the narrow band interference effectiveness for the L1 C/A code GPS receiver has been performed by using the Spirent GSS4765 jamming simulator. After analyzing the experimental result, it is compared with the calculated J/S value of the two different L1 C/A code GPS receivers. By the above result, the narrowband jamming effectiveness of the each jamming source and the jamming margin for the each receiver are to be analyzed in detail. Finally, we could utilize the result to analyze the jamming effectiveness on the GNSS receiver.

• 한국결정성장학회지
• /
• 제10권5호
• /
• pp.356-361
• /
• 2000

The radial position of OiSF-ring has been meaningful data in industry. Thus it's position was calculated by application of (V/G)/sub crit/ = 0.138 ㎟/minK and point defect dynamics for industrial scale grower with various pull rates. After the calculation, compared with experimental result. OiSF-ring diameters expected with calculation were good agreement with experimental results. In order to show validity of the predicted temperature distribution using STHAMAS which is one of the global simulator for Cz crystal growing, temperature was measured along the axis of crystal using thermocouples, and compared with the calculated temperature. We found the effective thermal conductivity K/sub m/ (r) which gives in accordance with the temperature distribution at the axis of crystal and crystal/melt interface shape between experimental and computational results. Therefore, effective thermal conductivity K/sub m/ (r) was applied instead of solving melt convection problem.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 춘계학술대회 논문집
• /
• pp.154-159
• /
• 2005

In this paper, We used the microphone unlike existing urodynamic inspection which diagnoses the LUTS(lower urinary tract symptoms) and proposed sound measurement the method which the urination happens and apply at a blockade diagnosis. To analyze the blockade degree, We made the experiment set to modeling the Lower Urinry System of the human body and made the microphone of the stethoscope form for the measurement of the urinary sound which the urination happens. We used PC for the analysis of the urinary sound to be measured and implemented the analysis program to use the MATLAB. Hereafter, An analysis result usage, The Practical use will be possible as one of new inspection methods's.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.177-178
• /
• 2013

Steel structures of the seaside area are naturally led to surface corrosion due to incoming salt. Signature measures for this are to replace steel with steel material with a high corrosion-resistance and to block salt and other deteriorative factors beforehand through finishing work such as surface coating. However, the variety in steel materials, finishing type, and construction methods makes adhesive weight of incoming salt different depending on each type. For this research, measurement results derived from an enhancement experiment on artificial incoming salt adhesive to 4 steel finishing types and 2 material types identified a difference of adhesive weight by each sampler.