• 한국시뮬레이션학회논문지
• /
• 제16권2호
• /
• pp.45-54
• /
• 2007

최근 시뮬레이션 최적화를 통한 입 출력 변수의 분석에 관한 많은 연구가 진행되고 있다. 이와 같은 연구에서 메타모델을 활용한 기법이 많이 제시 되고 있는데, 대부분은 중요(종속) 변수를 목적함수로, 설계(독립) 변수를 제약 조건으로 다목적 최적 함수를 구성하여 실험을 진행하고 최적해를 찾는다. 본 논문에서는 직접적인 설계 변수의 선택을 하기 위하여 설계 변수를 벡터의 형태로 전환하여 목적함수로 구성하고, 설계 변수의 정의역과 회귀 메타모델을 이용하여 제약조건을 구성하여 다목적 최적 함수를 구성하여 파레토 최적해 집합을 산출 하는 방법을 제시 하였다. 이와 같은 분석을 사용하여 최적해의 개념이 아닌 최적해 집합을 제시함으로서 설계자가 자신의 시스템에 가장 적당한 설계 변수의 선택이 가능해 지며, 메타모델의 에러 변수($\epsilon$)를 줄이기 위한 대안의 선택도 가능 할 것이다. 이와 같은 분석 기법은 관련 분야뿐 아니라 일반적인 시스템 설계 변수의 적용에도 충분히 이용이 가능 할 것이다.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.152-157
• /
• 2003

Process design of hot forging, asymmetric to symmetric rib-web shape steel, which is used for the turnout of railway express has been investigated. Owing to the big difference in shape between the initial billet and the final forged product, it is impossible to hot forge the rail in a single step. Therefore, multi step forging as well as die design for each step are necessary for the production. The deformation behavior during hot forging has been analyzed by the numerical simulation through commercial FEA software, $DEFORM^{TM}$-2D. Modification of the design and repeated simulation have been carried out on the basis of the simulation result. For comparison with the simulation results. flow analysis experiment using plasticine has been also carried out. The results of the flow analysis experiment showed good agreement with those of the simulation. Therefore, the developed process design could be applied to the actual production.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 추계학술대회 논문집
• /
• pp.63-69
• /
• 1999

The research trend of the simulation optimization has been focused on exploring continuous decision variables. Yet, the research in discrete decision variable area has not been fully studied. A new research trend for optimizing discrete decision variables ha just appeared recently. This study, therefore, deals with a discrete simulation method to get the system evaluation criteria required for designing a complex probabilistic discrete event system and to search the effective and reliable alternatives to satisfy the objective values of the given system through a on-line, single run with the short time period. Finding the alternative, we construct an algorithm which changes values of decision variables and a design alternative by using the stopping algorithm which ends the simulation in a steady state of system. To avoid the loss of data while analyzing the acquired design alternative in the steady state, we provide background for estimation of an auto-regressive model and mean and confidence interval for evaluating correctly the objective function obtained by small amount of output data through simulation with the short time period. In numerical experiment we applied the proposed algorithm to (s, S) inventory system problem with varying Δt value. In case of the (s, S) inventory system, we obtained good design alternative when Δt value is larger than 100.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.25-30
• /
• 2019

This paper presents the design strategy for the optimal RTM molds of Carbon Fiber Reinforced Plastic (CFRP) by carbon fiber draping and resin flow simulation. First, the mold shape and molding condition were determined considering the undercut and die face of the product in the draping simulation, which made the preliminary shape of the product by compressing the carbon fiber. After that, the diffusion behavior during the injection of resin in the mold was predicted by the resin flow simulation. Finally, the optimal mold shape was designed by selecting the locations of resin injection port and vent based on total results of simulations. In this paper, the mold of automotive side mirror case was selected as the representative product. Also, the actual mold was manufactured based on the simulation design to confirm the practicality of it. This study is expected to contribute to the industry as a technology to improve the reliability and productivity of CFRP producted by RTM process.

• Advances in Computational Design
• /
• 제4권4호
• /
• pp.343-365
• /
• 2019

Among the themes related to earthquake countermeasures at construction sites, those for tower cranes are particularly important. An accident involving the collapse of a crane during the construction of a skyscraper has serious consequences, such as human injury or death, enormous repair costs, and significant delays in construction. One of the causes of deadly tower crane collapses is the destruction of the site joints of the tower crane mast. This paper proposes a new design method by static elastoplastic finite element analysis using a supercomputer for the design of the end plate-type tensile bolted joints, which are generally applied to the site joints of a tower crane mast. This new design method not only enables highly accurate and reliable joint design but also allows for a design that considers construction conditions, such as the introduction of a pre-tension axial force on the bolts. By applying this new design method, the earthquake resistance of tower cranes will undoubtedly be improved.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.446-459
• /
• 2017

Naval ships are assigned many and varied missions. Their performance is critical for mission success, and depends on the specifications of the components. This is why performance analyses of naval ships are required at the initial design stage. Since the design and construction of naval ships take a very long time and incurs a huge cost, Modeling and Simulation (M & S) is an effective method for performance analyses. Thus in this study, a simulation core is proposed to analyze the performance of naval ships considering their specifications. This simulation core can perform the engineering level of simulations, considering the mathematical models for naval ships, such as maneuvering equations and passive sonar equations. Also, the simulation models of the simulation core follow Discrete EVent system Specification (DEVS) and Discrete Time System Specification (DTSS) formalisms, so that simulations can progress over discrete events and discrete times. In addition, applying DEVS and DTSS formalisms makes the structure of simulation models flexible and reusable. To verify the applicability of this simulation core, such a simulation core was applied to simulations for the performance analyses of a submarine in an Anti-SUrface Warfare (ASUW) mission. These simulations were composed of two scenarios. The first scenario of submarine diving carried out maneuvering performance analysis by analyzing the pitch angle variation and depth variation of the submarine over time. The second scenario of submarine detection carried out detection performance analysis by analyzing how well the sonar of the submarine resolves adjacent targets. The results of these simulations ensure that the simulation core of this study could be applied to the performance analyses of naval ships considering their specifications.

• 한국환경과학회지
• /
• 제28권11호
• /
• pp.951-958
• /
• 2019

Seoullo7017, an elevated linear park, was created to redevelop obsolete road infrastructure as public space, which provides unique landscapes. This study was aimed to evaluate and suggest proper planting design for improving psychological benefits in Seoullo7017. Field survey and simulation experiment were carried out to investigate the user's perception on the landscapes. Many users had negative feelings of the present landscapes in Seoullo7017, due to concrete pavement and simple planting design using big concrete pots. Landscape simulation experiment showed this perception could change depending on planting design. In especial, herb species played an important role in improving the quality of landscape in a linear park and providing positive feelings such as refreshment, warmth and naturalness. This study suggested that planting design in a linear space needs to be focused rather on the planting style and species than the volume of greens.

• 한국CDE학회논문집
• /
• 제17권2호
• /
• pp.79-90
• /
• 2012

In digital virtual manufacturing simulation, Digital Human widely used to optimal workplace design, enhancing worker safety in the workplace, and improving product quality. However, the case of ergonomics simulation solutions to support digital human modeling, Optimal DHM (Digital Human Model) data needed to develop and perform DHM will collect information related to the production process. So simulation developer has burden of collecting information. In this study, to overcome the limitations of existing solutions, we proposed the ADAGIO(Automated Digital humAn model development for General assembly usIng Ontology) framework. The ADAGIO framework was developed for DHM ontology to support optimal deployment of digital virtual environment and in order to ensure consistency of simulation components that are required for simulation modeling was made of a library.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.46-51
• /
• 2009

Recently, the shock resistance and dynamic characteristics of hard disk drives have become more important due to their highly increased storage density and miniaturization. In this study, we have developed an ANSYS/Mechanical/LS-DYNA based HDD vibration/shock simulation tool for design engineers. This simulation tool using ANSYS APDL can produce a parametric finite element modeling of HDD automatically and has GUI-based applications using the script program language Tcl/Tk. In the present tool, we adopt the reliable methodology of vibration/shock simulation, which is experimentally verified. It is expected that this simulation tool can make the repetitive computational efforts for the shock-proof design of HDD drastically reduced.

• 한국시뮬레이션학회논문지
• /
• 제9권2호
• /
• pp.103-118
• /
• 2000

ITS(Intelligent Transportation System) is an advanced system which can effectively handle the current transportation problems. DSRC(Dedicated Short Range Communication) is considered as a promising technology since it has the capability of two-way communication and can serves to implement various ITS services. In this paper, we study DSRC based ITS telecommunication traffic analysis and suggest an architecture and network design of telecommunication network for DSRC services. We also perform a simulation study to validate the proposed network architecture and design for Metropolitan Seoul Area with various network alternatives. In this simulation, we use actual traffic data and road characteristics from Seoul area and use our DSRC service configuration.