• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.244-251
• /
• 2016

In defense domain, mission level and engagement level simulation tools exist. In order to experiment a simulation scenario for obtaining results of both mission level and engagement level simulations, we should write a same simulation scenario in a mission level simulation tool as well as an engagement level simulation tool, and we have to operate these tools for analysis of each purpose. Moreover, we could not guarantee that these scenarios are completely same since each scenario is composed of different fidelities of simulation models, although the scenarios are written by a same experimenter and with same simulation purpose. To deal with the difficulties, I propose an approach to analysis of both mission level and engagement level simulations from one simulation result. For this, I have built Composite Combat Mission Planning Simulation Environment (CCMPSE). In this paper, the HLA/RTI based simulation composition technology and my experiences for the designed Composite Combat Mission Planning Simulation Control System (CCMPSCS) are explained. Moreover, This paper also conducts a case study with EADSIM, SADM, and the CCMPSCS. Finally, this paper provides lesson learned from the case study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.1
• /
• pp.178-190
• /
• 1999

This study was conducted to develop a simulation model for the growth dynamics of pigs and to describe quantitatively protein deposition depending on the amino acid composition of feed protein. In the model it is assumed that the essential processes that determine the utilization of feed protein in the whole body are protein synthesis, breakdown of protein, and oxidation of amino acid. Besides, it is also assumed that occurrence of protein deposition depends on genetic potential and amino acid composition of feed protein. The genetic potential for the protein deposition is the maximum capacity of protein synthesis, being dependent on the protein mass of the whole body. To describe the effect of amino acid composition of feed on the protein deposition, a factor, which consist of ten amino acid functions and lie between 0 and 1, is introduced. Accordingly a model was developed, which is described with 15 flux equations and 11 differential equations and is composed of two compartments. The model describes non linear structure of the protein utilization system of an organism, which is in non steady state. The objective function for the simulation was protein deposition(g/day) cal culated according to the empirical model, PAF(product of amino acid functions) of Menke. The mean of relative difference between the simulated protein deposition and PAF calculated values, lied in a range of 11.8%. The simulated protein synthesis and breakdown rates(g/day) in the whole body showed a parallel behavior in the course of growth.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.4
• /
• pp.90-96
• /
• 2006

Computer simulation was carried out to develop the tracer composition of a high performance to be able to be observed by not only the naked eye but also the thermal imaging system attached to the weapon system. The results of computer simulation show that the optimum Mg content among the trace compositions is about 40% and the formulation consisted of Viton A has a higher flame temperature compared with that of chloride compound. But the only use of Viton A radiates a yellow light and the composition adding a chloride compound radiates the red light. The light intensity of the tracer composition involving Viton A is higher than that of chloride compound. The tracer composition involving Viton A shows more clear images in case of all tests.

• Journal of the Korean housing association
• /
• v.19 no.4
• /
• pp.21-29
• /
• 2008

The purpose of this study is to evaluate preferences for spatial composition by urban design guidelines of detached housing areas using CG simulation, with the aim of contributing to the improvement and management of residential townscapes. The list of urban design guidelines for detached housing areas was derived from an analysis of urban design guidelines and landscape regulations from the U.S.A, Japan, and Korea. These guidelines comprise building guidelines, landscape guidelines, street guidelines, and sign guidelines. Through the preferences revealed by CG simulation, an optimum presentation method for the urban design guidelines was determined. Based on the results of preferences, an appropriate management system and regulation standards were proposed. In conclusion, the efforts carried out on the study and legislation of a management system and regulation standards for the urban design guideline will accomplish the amenity of residential environments.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.811-817
• /
• 2002

Gibbs ensemble Monte Carlo simulations were performed to calculate the vapor-liquid coexistence properties for the binary mixtures $CO_2/CH_3OH$, $CO_2/C_2H_5OH$, and $CO_2/CH_3CH_2CH_2OH.$ The configurational bias Monte Carlo method was used in the simulation of alcohol. Density of the mixture, composition of the mixture, the pressure-composition diagram, and the radial distribution function were calculated at vapor-liquid equilibrium. The composition and the density of both vapor and liquid from simulation agree considerably well with the experimental values over a wide range of pressures. The radial distribution functions in the liquid mixtures show that $CO_2$ molecules interact more stogly with methyl group than methylene group of $C_2H_5OH$ and $CH_3CH_2CH_2OH$ due to the steric effects of the alcohol molecules.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.258-265
• /
• 2006

DEVS formalism is advantageous in modeling large-scale complex systems and it reveals good readability, because it can specify discrete event systems in a hierarchical manner. In contrast, it has drawback in that the simulation speed of DEVS models is comparably slow since it requires frequent message passing between the component models in run-time. This paper proposes a method, called model composition, for simulation speedup of DEVS models. The method is viewed as a compiled simulation technique which eliminates run-time interpretation of communication paths between component models. Experimental results show that the simulation speed of transformed DEVS models is about 18 times faster than original ones.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.11a
• /
• pp.91-97
• /
• 2002

DEVS 형식론을 비롯한 모듈러한 시스템 모델링 방법은 복잡한 시스템을 모델링 할 때 유리하다. 반면에, 모듈러한 구성요소 모델들은 타 구성요소 모델의 상태 정보를 참조, 복사함으로써 빈번한 메시지 전달을 야기 시켜 시뮬레이션 속도가 저하되는 단점이 있다. 모델 합성법(Composition)은 여러 개의 요소모델들을 하나로 통합시키는 연산으로서 시스템 검증 분야에서 많이 사용되어져 왔다. 본 논문은 모델 합성법을 이용하여 구성요소 모델들 간에 주고받는 메시지 수를 줄이고 시뮬레이션 속도를 개선시키는 방법을 제안한다. 간단한 예제를 통하여 제안한 방법을 자세히 보여주고자 한다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.3
• /
• pp.258-266
• /
• 2000

Experimental investigation and cycle simulation of a capacity modulation of a heat pump system using a hydrofluorocarbon (HFC) refrigerant mixture, R32/134a as an alternative to R22, have been done. In the cycle simulation, the refrigeration system was operated by assigning the temperatures of the external heat transfer fluids with the heat exchangers generalized by an average effective temperature difference. Heating capacity, cooling capacity, and coefficient of performance (COP) of the system were investigated at several operating conditions. Experimental apparatus which had a refrigeration part and a composition changing part was built, and the performance of the heat pump system filled with R32/134a mixture was investigated. A gas-liquid separator was used in the experiment to change the composition by collecting the vapor and the liquid Phase separately, The mass fraction of the charged refrigerant in the heat pump system was 40/60 and 70/30 by weight percentage. The composition of the refrigerant with initial composition of 40/60 varied from 29/71 to 41/59 in the refrigeration cycle. For the refrigerant with initial composition of 70/30, the composition varied from 65/35 to 75/25.

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.337-343
• /
• 2021

In this work, self-absorption correction factor related to the variation of the composition and the density of soil samples were evaluated using the p-type HPGe detector. The validated MCNP5 simulation model of this detector was used to evaluate its Full Energy Peak Efficiency (FEPE) under the variation of the composition and the density of the analysed samples. The results indicates that FEPE calculation of low gamma ray is affected by the composition and the density of soil samples. The self-absorption correction factors for different gamma-ray energies which was fitted as a function of FEPEs via density and energy and fitting parameters as polynomial function for the logarithm neper of gamma ray energy help to calculate quickly the detection efficiency of detector. Factor Analysis for the influence of the element composition in analysed samples on the FEPE indicates the FEPE distribution changes from non-metal to metal groups when the gamma ray energy increases from 92 keV to 238 keV. At energies above 238 keV, the FEPE primarily depends only on the metal elements and is significantly affected by aluminium and silicon composition in soil samples.

• Communications for Statistical Applications and Methods
• /
• v.23 no.6
• /
• pp.517-529
• /
• 2016

This study compares the inverse transform and the composition methods for generating data from the Lindley distribution. The expression for the inverse of the distribution function for the Lindley distribution does not exist in closed form. Hence, authors of many empirical studies on the Lindley distribution used methods for generating Lindley variates other than the inverse transform. We generated data from the Lindley distribution using the inverse transform approach by obtaining the Lindley variates numerically; we also generated data from this distribution using the composition approach. Following the generation of the Lindley variates using these two methods, we compare some statistical properties of the estimates of the Lindley model parameters based on the generated data. We conclude that the two methods produce similar results.