• 한국통신학회논문지
• /
• 제26권12B호
• /
• pp.1733-1740
• /
• 2001

A monolithic 5 GHz image reject mixer using a 0.5-m GaAs MESFET technology is designed and simulated. The Mixer exhibits a 13.56 dB down-conversion gain, a SSB (Single SideBand) noise figure of 11.91 dB, an input IP3 (third order intercept point) of -3.73 dBm and a PldB (1-dB compression point) of -11.0 dBm. The critical issue in the image reject mixer is the phase accuracy and magnitude balance of the 90 phase shifting network. The proposed image reject mixer realizes a 90 phase shifter on chip. This phase shifting network does not need any phase adjusting to achieve the phase error specification of 3 over a frequency range from 800 MHz to 1GHz. The simulated overall image rejection ratio is better than 50 dB.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1941-1945
• /
• 2011

In this paper, we propose a real-time classifier to distinguish humans from livestock by using the spatial integral. The image-difference method and the Expectation Maximization are used to reduce noises in input image. A histogram analysis based on Simulated Annealing and the fuzzy-Bayesian algorithm are used to classify human and livestock. Finally, the experiment results show the validity of the proposed method.

• 항공우주기술
• /
• 제6권1호
• /
• pp.97-102
• /
• 2007

위성의 성능은 위성 생산물에 의해 평가될 수 있다. 위성 기술 수준이 진입 단계인 경우 대부분의 노력이 위성 작동 및 안전성에 집중되지만, 위성 기술이 적정 수준 이상으로 확보된 이후에는 위성 성능 및 임무 성공에 개발 노력이 집중된다. 특히 광학 위성의 경우 사용자에게 전달되는 위성 영상 품질이 임무 성공 여부와 직접적으로 관련되어 있다. 본 논문은 위성 설계 단계에서 위성 영상 품질 평가에 사용될 수 있는 MTF가 반영된 가상영상을 제작하는 방법을 제시하는 것을 내용으로 한다.

• 한국멀티미디어학회논문지
• /
• 제7권3호
• /
• pp.349-356
• /
• 2004

본 논문에서는 SA(simulated annealing) 알고리듬에 기반한 4-f 광 상관 시스템을 이용하여 실제적인 영상 보안 시스템을 제안하였다. 반복적인 SA알고리듬을 이용하여 이진 위상 성분을 갖는 암호화된 영상과 키 영상을 얻고, 4-f 광 상관 시스템을 이용하여 암호화된 영상과 키 영상과의 상관을 통해 복호화된 영상이 구해진다. 제안된 방법에서는 암호화된 영상 및 키 영상이 이진 위상 성분으로 구성되므로 광 보안 시스템을 구현하기 쉬운 장점이 있다. 그리고 만약 암호화된 영상을 암호화 시스템내에서 고정시키고, 키 영상 정보만을 달리 하면 서로 다른 영상을 복호화할 수 있으므로 차별화된 인증시스템에 응용할 수 있는 장점도 있다. 컴퓨터 시뮬레이션 결과는 두 영상(암호화 및 키 영상)의 이진 위상 성분에도 불구하고, 복호화영상이 생성됨을 보여준다.

• 센서학회지
• /
• 제14권6호
• /
• pp.387-394
• /
• 2005

In order to design SOI CMOS image sensors, SOI MOSFET model parameters were extracted using the equation of bulk MOSFET model parameters and were optimized using SPICE level 2. Simulated I-V characteristics of the SOI NMOSFET using the extracted model parameters were compared to the experimental I-V characteristics of the fabricated SOI NMOSFET. The simulation results agreed well with experimental results. A unit pixel for SOI CMOS image sensors was designed and was simulated for the PPS, APS, and logarithmic circuit using the extracted model parameters. In these CMOS image sensors, a nano-wire MOSFET photodetector was used. The output voltage levels of the PPS and APS are well-defined as the photocurrent varied. It is confirmed that SOI CMOS image sensors are faster than bulk CMOS image sensors.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.100-103
• /
• 2007

A microlens array has been required to improve light conversion efficiency in image sensors. A microlens array can be usually fabricated by photoresist reflow, hot-embossing, micro injection molding, and UV-imprinting. Among these processes, a UV-imprinting, which is operated at room temperature with relatively low applied pressure, can be a desirable process to integrate microlens array on image sensors, because this process provides the components with low thermal expansion, enhanced stability, and low birefringence, furthermore, it is more suitable for mass production of high quality microlens array. In this study, to analyze the optical properties of the wafer scale microlens array integrated image sensor, another wafer scale simulated image sensor chip array was designed and fabricated. An aspherical square microlens was designed and integrated on a simulated image sensor chip array using a UV-imprinting process. Finally, the optical performances were measured and analyzed.

• 대한원격탐사학회지
• /
• 제26권3호
• /
• pp.297-304
• /
• 2010

Since the change in Doppler centroid according to moving targets brings alteration to the phase in azimuth differential signals of synthetic aperture radar (SAR) data, one can measure the velocity of the moving targets using this effect. In this study, we will investigate theoretically measuring the velocity of an object from azimuth differential signals by using range compressed data which is the interim outcome of treatment from the simulated SAR raw data of moving targets on the background of sea clutter. Also, it will provide evaluation for the elements that affect the estimation error of velocity from a single SAR sensor. By making RADARSAT-1 simulated image as a specific case, the research includes comparisons for the means of velocity measurement classified by the directions of movement in the four following cases. 1. A case of a single target without currents, 2. A case of a single target with tidal currents of 0.5 m/s, 1 m/s, and 3 m/s, 3. A case of two targets on a same azimuth line moving in a same direction and velocity, 4. A case of a single target contiguous to land where radar backscatter is strong. As a result, when two moving targets exist in SAR image outside the range of approximately 256 pixels, the velocity of the object can be measured with high accuracy. However, when other moving targets exist in the range of approximately 128 pixels or when the target was contiguous to the land of strong backscatter coefficient (NRCS: normalized radar cross section), the estimated velocity was in error by 10% at the maximum. This is because in the process of assuming the target's location, an error occurs due to the differential signals affected by other scatterers.

• 한국조경학회지
• /
• 제35권5호
• /
• pp.82-91
• /
• 2007

Currently, bridges are regarding as the structure with formative, scenic and environmental values more than their function as simple passageways. Because an attempt to work on the diversity of the bridge types and installation of the large structures on bridge are part of the project of the regional amenity enterprises, a study that harmonizes bridges with landscape is needed at this point in time. This background can influence the direction of bridge landscapes that considers local features by analysis of visual preferences on a bridge simulated scene. The results were as follows: analyzing the change of the simulated landscape image, forest landscape are damaged by the input of a bridge which was natural, harmonic and intimate. On the other hand, when a bridge was inserted into the ocean landscape, it was thought to improve the ocean landscape, especially, upper part form of arch bridge various or suspension bridge were improved in polished and various image. The insertion of a bridge into an urban landscape change from a negative image to a beautiful, harmonic and attractive image. The intimate, harmonic and natural image of a rural landscape was damaged by inserting a bridge. As analysis result about change of landscape preference by input of bridge, there is difference between before and after as input the bridge, and bridge influences as main object in the simulated scene. Visual preference was the highest in the ocean landscape, and the lowest in the suspension bridge in the rural landscape. The complicated shape of bridge follows on the background type difference certainly appear. Thee simulated scene preference except the urban landscape of the simulated scene fell generally Especially, fall of preference of girder bridge in the forest and ocean landscape, suspension bridge in the rural landscape appeared notedly.

• Spatial Information Research
• /
• 제19권1호
• /
• pp.29-40
• /
• 2011

정지궤도 해색 센서(GOCI: Geostationary Ocean Color Imager) 는 세계 최초의 정지궤도 위성으로 매일 1 시간마다 8 장의 영상을 획득 할 수 있어 육상파 해양 모두 활용성이 높은 위성이다. 그러나 500m의 GSD(Ground Sample Distance)를 지니는 서해성도 영상은 육성 활용에 한계가 있다. 최근, 컴퓨터 비전분야에서 활발히 진행 중인 기술인 Super Resolution(이하 SR)는 유사 시간대에 촬영한 저해상도 영상으로부터 고해상도 영상을 제작하는 기술로, 이를 시간 해상도가 높은 시계열 위성인 GOCI에 적용한다면 해상도가 향상 된 영상을 제작하는 기술로, 이를 시간 해상도가 높은 시계열 위성인 GOCI에 적용한다면 해상도가 향상 된 영상의 취득이 가능하며, 또한 광학 위성 영상의 단점인 구름에 의해 손실된 지상 정보의 복원이 가능할 것이다. 본 연구에서는, GOCI 자료를 위한 효율적인 초해상도 영상 복원 알고리즘 개발을 위한 선행연구로써 위성 영상 취득과정과 유사한 환경의 시뮬레이션을 통해 시계열 자료를 제작하고, 제작된 자료를 제안한 알고리즘에 적용함으로서 0.1 단위의 픽셀 정합도를 확인하였고, 원본 영상과 RMSE 0.5763, PSNR 52.9183 db, SSIM Index 0.9486의 정확도를 나타낸 HR 영상을 복원하였다.

• International Journal of Computer Science & Network Security
• /
• 제21권1호
• /
• pp.143-151
• /
• 2021

The enormous prevalence of transferring official confidential digital documents via the Internet shows the urgent need to deliver confidential messages to the recipient without letting any unauthorized person to know contents of the secret messages or detect there existence . Several Steganography techniques such as the least significant Bit (LSB), Secure Cover Selection (SCS), Discrete Cosine Transform (DCT) and Palette Based (PB) were applied to prevent any intruder from analyzing and getting the secret transferred message. The utilized steganography methods should defiance the challenges of Steganalysis techniques in term of analysis and detection. This paper presents a novel and robust framework for color image steganography that combines Linear Congruential Generator (LCG), simulated annealing (SA), Cesar cryptography and LSB substitution method in one system in order to reduce the objection of Steganalysis and deliver data securely to their destination. SA with the support of LCG finds out the optimal minimum sniffing path inside a cover color image (RGB) then the confidential message will be encrypt and embedded within the RGB image path as a host medium by using Cesar and LSB procedures. Embedding and extraction processes of secret message require a common knowledge between sender and receiver; that knowledge are represented by SA initialization parameters, LCG seed, Cesar key agreement and secret message length. Steganalysis intruder will not understand or detect the secret message inside the host image without the correct knowledge about the manipulation process. The constructed system satisfies the main requirements of image steganography in term of robustness against confidential message extraction, high quality visual appearance, little mean square error (MSE) and high peak signal noise ratio (PSNR).