• Journal of Ship and Ocean Technology
• /
• 제10권3호
• /
• pp.27-35
• /
• 2006

The static stability of a high-speed hovercraft is estimated by model tests, simplified restoring moment equations and CFD. Well-known methods to increase the stability of hovercrafts are introduced. Roll and pitch moments of a scaled model with a skirt system are measured over inclination angles. The tests are performed on cushion at zero speed both on-land and over-water. To predict the static stability performance, simple restoring moment equations and CFD approach are introduced. Both shows a quantitative difference from the model test results, however, could be used as a design tool for relative comparison prior to model tests.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.78-85
• /
• 2013

This paper presents the sliding mode control methods for anti-lock brake system (ABS) with the friction force observer. Using a simplified quarter car model, the sliding mode controller for ABS is designed to track the desired wheel slip ratio. Here, new method to find the desired wheel slip ratio which produces the maximum friction force between road and tire is suggested. The desired wheel slip ratio is varying according road and tire conditions to produce maximum friction force. In order to find optimum desired wheel slip ratio, the sliding mode observer for friction force is used. The proposed sliding mode controller with observer is evaluated in simulation, and the control design is shown to have high performance on roads with constant and varying adhesion coefficients.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.329-331
• /
• 2001

This paper representes a realization of a fuzzy logic speed controller for BLDC motor drives. Fuzzy sets are regulated by using parameters of BLDC motor. Simplified reasoning methods are used for defuzzification. Fuzzy logic speed controller is designed by using the high performance of DSPchip (TMS320F240). By experiment, it is confirmed that the speed of BLDC motor well follows an command speed in the load variables or low-speed area.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.75-80
• /
• 1999

The water requirement of crops in paddy fields is composed of evapotranspiration and infiltration. The determination of effective rainfall has the great significance for the irrigation managements and system design. There are numerous methods to estimate effective rainfall. The FreeBoard Model(FBM), ond of them , is popular because it can describe the algorithm of effective rainfal with simplified and general formation. The purpose of this study is to evaluate effective rainfall by field measurement , to compare this closely with the results from freeboard model and modified freeboard model , and to find out which of two models is more consistent with the results obtained by measurements.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.111-116
• /
• 1998

The squeal of drum brakes was investigated numerically and experimentally. Modal testings were performed for shoes, drums, backing plates and their assemblies. In order to predict the squeal phenomena, stability analysis was performed based on a simplified self-excited vibration model. Based on modal testings, the dynamic properties of the brake elements and the parameters used in this analysis were determined. The geometries of shoes and drums were also considered. The result shows that the modification methods of the shoe and the drum design are feasible for noise reduction.

• 한국해양공학회지
• /
• 제37권6호
• /
• pp.256-265
• /
• 2023

Many numerical methods have been developed since 1961, but unresolved issues remain. This study developed a numerical method to address these issues and determine the coefficients and properties of rotational waves with a shear current in a finite water depth. The number of unknown constants was reduced significantly by introducing a wavelength-independent coordinate system. The reference depth was calculated independently using the shooting method. Therefore, there was no need for partial derivatives with respect to the wavelength and the reference depth, which simplified the numerical formulation. This method had less than half of the unknown constants of the other method because Newton's method only determines the coefficients. The breaking limit was calculated for verification, and the result agreed with the Miche formula. The water particle velocities were calculated, and the results were consistent with the experimental data. Dispersion relations were calculated, and the results are consistent with other numerical findings. The convergence of this method was examined. Although the required series order was reduced significantly, the total error was smaller, with a faster convergence speed.

• 복식
• /
• 제62권7호
• /
• pp.13-28
• /
• 2012

This study examines history of Korean peony patterns and characteristics of peony patterns on the fabric. It is classified according to expression methods, and it analyzes the characteristics of 71 kinds of peony woven on 66 Korean fabrics. First, it was observed that 38 of the 66 studied fabrics (57.6%) were relics from the 17th century, and from this it can be deduced that the peony patterns began to appear regularly around the latter half of the 16th century and were used habitually in the 17th century. Second, 71 kinds on 66 fabrics can be divided into Real Type, Design Type, and Abstraction Type according to expression methods. Among these types, 49 kinds of them are Real Types (69.0%), forming the greatest part and 19 kinds belonging to the Design Type (26.8%), and lastly, 3 kinds were under the Abstraction Type (4.2%). In particular, peony patterns of Design Types and Abstraction Types from the 17th century and from the 19th century to the 20th century were more prevalent, compared with those before the 16th century or the 18th century. Third, Real Types shown on the Korean fabrics are subdivided into 9 types, and the Real Type A among them, which describes to be as real as possible, is 12 kinds, the largest number of them. Therefore, real and natural pattern of peony is the favorite type in Korea, while rather emphasized pattern of peony is the more preferred pattern in China. And also Design Types are subdivided into 6 types again; There are 6 kinds of design type A, the largest part of Design Types. Patterns of Design Type A are most similar to real peony flowers, but more simplified than the Real Type A. This result also contrasted with the trend in China, where the Design Type C, expressed petals in detail was the favored pattern. Fourth, 9 kinds of unique types are found in Korean fabrics, especially Real Type M has not been shown on Chinese fabrics. Real type M, consisting of two parts, inner and outer, where two curve lines between two parts appear as antennas of a butterfly.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.459-470
• /
• 2014

During ship design, welding-induced distortions are roughly estimated as a function of the size of the component as well as the welding process and residual stresses are assumed to be locally in the range of the yield stress. Existing welding simulation methods are very complex and time-consuming and therefore not applicable to large structures like ships. Simplified methods for the estimation of welding effects were and still are subject of several research projects, but mostly concerning smaller structures. The main goal of this paper is the application of a multi-layer welding simulation to the block joint of a ship structure. When welding block joints, high constraints occur due to the ship structure which are assumed to result in accordingly high residual stresses. Constraints measured during construction were realized in a test plant for small-scale welding specimens in order to investigate their and other effects on the residual stresses. Associated welding simulations were successfully performed with fine-mesh finite element models. Further analyses showed that a courser mesh was also able to reproduce the welding-induced reaction forces and hence the residual stresses after some calibration. Based on the coarse modeling it was possible to perform the welding simulation at a block joint in order to investigate the influence of the resulting residual stresses on the behavior of the real structure, showing quite interesting stress distributions. Finally it is discussed whether smaller and idealized models of definite areas of the block joint can be used to achieve the same results offering possibilities to consider residual stresses in the design process.

• 콘크리트학회논문집
• /
• 제14권6호
• /
• pp.989-1000
• /
• 2002

비선형 정적해석법과 같은 발전된 지진 해석 및 설계방법은 강도, 연성도, 에너지 소산량으로 대표되는 철근콘크리트 부재의 주기거동을 정확하게 예측하는 것이 필요하게 되었다. 최근 연구에서 휨지배 철근콘크리트 부재에 대하여 최대변형능력까지의 반복적인 주기거동에 의한 소산에너지량을 계산할 수 있는 방법이 개발되었다. 본 연구에서는 선행 연구를 토대로 에너지 소산량을 계산할 수 있는 간단한 수식을 제안하고, 이를 실험 결과와 비교하여 검증하였다. 또한 제안된 수식을 이용하여 축력, 철근비, 배근형태, 연성도 등이 에너지 소산능력에 미치는 영향에 대해 연구하였다. 제안된 수식을 통하여 기존의 경험에 기초한 방법보다 더 정확하게 구조물의 에너지 소산능력을 산정 할 수 있으며, 따라서 연구결과는 성능에 기초한 내진평가 및 설계법에 유용하게 이용될 것으로 판단된다.

• 한국지진공학회논문집
• /
• 제7권6호
• /
• pp.109-117
• /
• 2003

기존의 비선형 정적 및 동적 해석에서는 철근콘크리트 구조물의 에너지 소산능력을 정확히 고려하지 못하고 있다. 최근 연구에서는 휨지배 철근콘크리트 부재의 에너지 소산능력을 정확히 평가할 수 있는 식이 개발되었으며, 본 연구에서는 이 평가방법을 이용하여 에너지 소산능력을 정확히 고려할 수 있는 비선형 정적 및 동적 해석 방법을 개발하였다. 비선형 정적 해석을 위하여 에너지 스펙트럼 곡선을 개발하고 이를 적용하여 능력스펙트럼법을 개선하였으며, 또한 비선형 동적 해석을 위하여 철근콘크리트 부재의 단순화된 에너지 기초 주기거동모델을 개발하였다. 제안된 모델은 부재의 강성에 기초한 기존의 주기거동모델과는 달리 완전한 주기거동 발생시 소산되는 에너지를 정확하게 반영할 수 있다. 본 연구에서는 제안된 방법에 따라 비선형 정적 및 동적 해석법의 절차를 정립하였으며 이를 적용한 컴퓨터 해석 프로그램을 개발하였다. 제안된 해석 방법은 부재의 단면형태, 철근비, 배근형태 등 설계 변수에 따른 에너지 소산능력을 정확하게 고려하고 지진발생시 에너지 소산능력이 구조물의 성능에 미치는 효과를 반영할 수 있다.