• Transactions of Materials Processing
• /
• v.29 no.6
• /
• pp.316-322
• /
• 2020

The flow stress curve is usually determined via uniaxial tensile or simple compression test. However, the flow stress curve up to high strain cannot be obtained using these two tests. This study presents a simple method for obtaining the flow stress curve up to high strain via FE analysis, a simple compression test, and an indentation test. In order to draw the flow stress curve up to high strain, the indentation test was carried out with the pre-stained specimen using the simple compression test. The flow stress curve of Al6110 was evaluated up to high strain using the proposed method, and the result was compared with the flow stress curve of the uniaxial tensile test of the initial material.

• Cartoon and Animation Studies
• /
• s.47
• /
• pp.381-412
• /
• 2017

Character conveys rich storytelling and various design elements. Domestic characters are changing and developing in various forms through SNS and offline sources, which are being developed in the aspect of contents industry. The purpose of this study is to find out and discuss the factors that character users are using Korean characters as storytelling and color factor. In terms of storytelling, they prefer adventure, fantasy, absurd and humorous stories. In terms of color, it seems that they prefer a character with simple and simple color/ warm color and warm / cute color composition. On the other hand, characters with a simple story, which is the main subject of early childhood education, fashion, or toys in the aspect of storytelling, are not preferred. In terms of color, it was shown that 4 or more colors were combined without a main color. These main colorless characters gave complex feelings that are not preferred. In terms of storytelling, it is necessary to develop and develop the contents of OSMU(One-source Multi use) through story development with adventure and fantasy structure. In terms of color, it is necessary to configure the user with a simple and simple color which is preferred by the users. Also, the assembly robot toy character needs to increase the satisfaction of the character through simple color composition. As a result of this study, the factors that satisfy the users in terms of storytelling and color are derived. These results will contribute to the development of theoretical aspects, storytelling aspects, and character design industry aspects. Despite the significance of the above paper, it was inevitable to limit the research on the analysis of the storytelling of specific characters, the research through the color analysis framework, the accurate data analysis on the color analysis, and the simple comparative analysis of one.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.5 s.236
• /
• pp.609-616
• /
• 2005

While the SIMPLE algorithm is most widely used for the simulations of flow phenomena that take place in the industrial equipments or the manufacturing processes, it is less adopted for the simulations of the free surface flow. Though the SIMPLE algorithm is free from the limitation of time step, the free surface behavior imposes the restriction on the time step. As a result, the explicit schemes are faster than the implicit scheme in terms of computation time when the same time step is applied to, since the implicit scheme includes the numerical method to solve the simultaneous equations in its procedure. If the computation time of SIMPLE algorithm can be reduced when it is applied to the unsteady free surface flow problems, the calculation can be carried out in the more stable way and, in the design process, the process variables can be controlled based on the more accurate data base. In this study, a modified SIMPLE algorithm is presented fur the free surface flow. The broken water column problem is adopted for the validation of the modified algorithm (MoSIMPLE) and for comparison to the conventional SIMPLE algorithm.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.13
• /
• pp.5123-5126
• /
• 2014

Background: To evaluate the diagnostic performance of IOTA simple rules in differentiating between benign and malignant ovarian tumors. Materials and Methods: A study of diagnostic performance was conducted on women scheduled for elective surgery due to ovarian masses between March 2007 and March 2012. All patients underwent ultrasound examination for IOTA simple rules within 24 hours of surgery. All examinations were performed by the authors, who had no any clinical information of the patients, to differentiate between benign and malignant adnexal masses using IOTA simple rules. Gold standard diagnosis was based on pathological or operative findings. Results: A total of 398 adnexal masses, in 376 women, were available for analysis. Of them, the IOTA simple rules could be applied in 319 (80.1%) including 212 (66.5%) benign tumors and 107 (33.6%) malignant tumors. The simple rules yielded inconclusive results in 79 (19.9%) masses. In the 319 masses for which the IOTA simple rules could be applied, sensitivity was 82.9% and specificity 95.3%. Conclusions: The IOTA simple rules have high diagnostic performance in differentiating between benign and malignant adnexal masses. Nevertheless, inconclusive results are relatively common.

• Transactions of Materials Processing
• /
• v.15 no.6 s.87
• /
• pp.467-472
• /
• 2006

The forming limit diagram of tube is required for the part design and the formability analysis of tube hydroforming. The finite element analyses of simple bulge test were done to obtain the various strain combinations on FLC. The finite element analysis results were shown that the bursting at various strain combinations could be induced by simple bulge test. The experiment oi tube bulge test was carried out according to the test condition that obtained from finite element analysis and the left hand side of forming limit diagram was built.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.7
• /
• pp.574-578
• /
• 2001

The stability analysis for the fuzzy logic controller (FLC) has widely been reported. Furthermore many research in the FLC has been introduced to decrease the number of parameters representing the antecedent part of the fuzzy control rule. In this paper we briefly explain a single-input fuzzy logic controller (SFLC) or simple-structured FLC which uses only a single input variable. And then we analyze that it is absolutely stale based on the sector bounded condition. We also show the feasibility of the proposed stability analysis through a numerical example of a mass-damper-spring system.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.505-510
• /
• 1996

A simple model for RAM (Reliability, Availability and Maintainability) analysis and its computer code are developed for application to DUPIC fuel fabrication system. The approach is obtained by linking the allocation model (top-down method) to bottom-up method for RAM analysis. As a result, the availability requirement of subsystem, as well as the buffer storage requirement between processes, are evaluated for the DUPIC facility..

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.269-272
• /
• 2006

The anchorage zone of prestressed concrete members is a critical region where a large concentrated force due to prestressing by tendons is introduced. In this study, the ACI, AASHTO LRFD, CEB-FIP design criteria and the nonlinear strut-tie model approach are applied to the ultimate strength analysis of simple anchorage zones of 18 post-tensioned concrete members tested to failure. From the result of ultimate strength analysis, the advantages and disadvantages of each method are compared and discussed.

• Journal of Mechanical Science and Technology
• /
• v.19 no.11
• /
• pp.2016-2024
• /
• 2005

In this work, a mixed beam approach that combines both the stiffness and the flexibility methods has been performed to analyze the coupled composite blades with closed, two-cell cross-sections. The Reissner's semi-complementary energy functional is used to derive the beam force-displacement relations. Only the membrane part of the shell wall is taken into account to make the analysis simple and also to deliver a clear picture of the mixed method. All the cross section stiffness coefficients as well as the distribution of shear across the section are evaluated in a closed-form through the beam formulation. The theory is validated against experimental test data, detailed finite element analysis results, and other analytical results for coupled composite blades with a two-cell airfoil section. Despite the simple kinematic model adopted in the theory, an accuracy comparable to that of two-dimensional finite element analysis has been obtained for cases considered in this study.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1036-1042
• /
• 2003

The hot embossing process has been mentioned as one of major nanoreplication techniques. This is due to its simple process, low cost, high replication fidelity and relatively high throughput. As the initial step of quantitating the embossing process , simple parametric study about embossing time have been carried out using high-resolution masters which patterned by the DRIE process and laser machining. Under the various embossing time, the viscous flow of thin PMMA films into microcavities during compression force has been investigated. Also, a study about simulating the viscous flow during embossing process has planned and continuum scale FDM analysis was applied on this simulation. With currently available test data and condition, simple FDM analysis using FLOW3D was made attempt to match simulation and experiment.