• 동력기계공학회지
• /
• 제4권4호
• /
• pp.70-77
• /
• 2000

On the dynamic behavior of a simple beam the influences of the velocities and distance of two moving masses have been studied by numerical method. The instant amplitude of a simple beam is calculated and analyzed for each position of the moving masses represented by the time functions. As increasing the velocties of two moving masses on the simple beam, the amplitude of the transverse vibration of the simple beam is decreased and the frequency of the transverse vibration of the simple beam is increased. As the distance between two moving masses increase, the transverse displacement of the simple beam is decrease. The simple beam is very stable in second mode at $\bar{a}=0.5$ and in third mode at $\bar{a}=0.3$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.701-705
• /
• 2000

On the dynamic behavior of a simple beam subjected to an uniformly distributed tangential follower force, the influences of the velocities and magnitudes of a moving mass have been studied by numerical method. The instant amplitude of a simple beam is calculated and analyzed for each position of the moving mass represented by the time functions. The uniformly distributed tangential follower force is considered in its critical value of a simple beam, and four values of velocity is also chosen. Their coupling effects on the deflections of a simple beam are inspected too. When a moving mass moves after middle zone of a simple beam at the low velocities, its deflection is increased by the coupling of an uniformly distributed tangential follower force and moving mass.

• 동력기계공학회지
• /
• 제4권4호
• /
• pp.65-69
• /
• 2000

On the dynamic behavior of a simple beam subjected to an uniformly distributed tangential follower force, the influences of the velocities and magnitudes of a moving mass have been studied by numerical method. The instant amplitude of a simple beam is calculated and analyzed for each position of the moving mass represented by the time functions. The uniformly distributed tangential follower force is considered within its critical value of a simple beam, and four values of velocity is also chosen. Their coupling effects on the deflections of a simple beam are inspected too. When a moving mass moves after middle zone of a simple beam at the low velocities, its deflection is increased by the coupling of an uniformly distributed tangential follower force and moving mass.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.82-88
• /
• 2002

A simple beam subjected to a uniformly distributed tangential follower force and the successive two moving spring-mass systems upon it constitute this vibration system. The influences of the velocities of the moving spring-mass system, the distance between the successive two moving spring-mass systems and the uniformly distributed tangential follower force have been studied on the dynamic behavior of a simple beam by numerical method. The uniformly distributed tangential follower force is considered within its critical value of a simple beam without the successive two moving spring-mass systems, and three kinds of constant velocities and constant distance of the successive two moving spring-mass systems are also chosen. Their coupling effects on the transverse vibration of the simple beam are inspected too.

• 전산구조공학
• /
• 제10권1호
• /
• pp.213-223
• /
• 1997

복잡한 구조물의 거동을 해석하는 데 있어서 초기 설계단계에서 부터 쉘요소를 사용하여 해석하는 것은 많은 시간과 경비가 요구된다. 이에 경비절감의 측면에서 쉘구조물을 단순 보구조물에 의해 모델링함에 의해 분석하고자 하는 연구가 진행되어왔다. 본 연구에서는 단순화된 보구조물의 결합부에 고려하기 위한 유연도를 나타내는 굽힘회전강성을 결정하는 방법을 제안하고, 제안된 방법을 통해 얻어진 결합부에서의 유연도을 보구조물의 결합부에 적용하여 비선형해석을 수행한다. 수치해석 결과로 쉘구조물에서 나타나는 기하학적 비선형거동을 결합부에서 유연도를 고려하는 단순 보구조물에 의해 작은 오차의 범위안에서 기술할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제14권3호
• /
• pp.307-330
• /
• 2002

This study aims at postulating a simple methodology for predicting the failure modes of monotonically loaded reinforced concrete beam-column joints. All the factors that affect the failure modes of joints are discussed in detail using an experimental database of monotonically loaded exterior beam-column joints. The relative contributions of the strut and truss mechanisms to joint shear strength are determined based on the test results. A simple design equation for the beam longitudinal reinforcement ratio for joints with low, medium and high amount of stirrups is developed. The factors influencing the failure modes of monotonically loaded exterior beam-column joints are investigated in detail. Design charts that predict the failure modes of exterior beam-column connections both with and without stirrups are developed. Experimental data are compared with the design charts. The results show that the simple methodology gives very accurate predictions of the failure modes.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.167-168
• /
• 2014

Building destruction can be occurred by decreasing of structural stability and deformation according to fire. Especially, a structural behavior of beam can be shown a slightly difference by beam types. In this paper, an evaluation of the structural stability of beam made of ordinary structural steel designed by fixed and simple boundary condition was done by an analytic method using mechanical properties of SS 400 and an heat transfer theory.

• 한국화재소방학회논문지
• /
• 제29권4호
• /
• pp.33-38
• /
• 2015

강구조 건축물의 바닥하중은 보부재를 통하여 기둥부재로 전달되며, 보부재는 양단 고정단 또는 단순보 조건으로 구성된다. 양단 고정단 강재보와 한단 힌지 그리고 타단 회전단의 단순보는 경계조건의 차이에 따라 전달되는 최대하중과 처짐 등 구조적 내력성능이 상이하나, 화재 시 내화성능 평가는 단순보의 경계조건으로 평가되고 있다. 따라서 본 논문에서는 강재보의 경계조건에 따른 내력적 성능의 차이를 확인하기 위하여 일반 구조용 강재(SS 400)의 고온특성을 적용한 열전달해석 및 열응력해석을 수행하였으며, 그 결과 동일한 보부재의 길이와 단면 조건하에서 부정정 구조물인 고정단 경계조건이 정정 단순보 경계조건에 비해서 내력과 처짐이 건전한 것으로 나타났다. 따라서 강재 보의 내화시험 시 단순보로 시험하는 것이 안전측으로 판단되었다.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.146-153
• /
• 2004

Torsion beam rear suspension has been widely adopted to the rear suspension of vehicle by reason of simple structure and cost competitiveness. Since the kinematic characteristics of torsion beam rear suspension are determined by elastic behavior of torsion beam, quasi-static analysis based on finite element modeling of torsion beam has been conducted to obtain the kinematic parameters of torsion beam rear suspension. In this paper, simple kinematic equations with rear geometric parameters are derived to predict the kinematic behavior of torsion beam rear suspension. The suspension design parameters such as roll center height, roll stiffness, roll steer and roll camber can be easily obtained with the kinematic equations. The suggested kinematic equations are validated from comparison with the test results and solution offered by ADAMS. The suspension design parameters varied with the position of torsion beam are discussed.

• Structural Engineering and Mechanics
• /
• 제44권4호
• /
• pp.521-538
• /
• 2012

In this study, the transverse vibrations of an axially moving flexible beams resting on multiple supports are investigated. The time-dependent velocity is assumed to vary harmonically about a constant mean velocity. Simple-simple, fixed-fixed, simple-simple-simple and fixed-simple-fixed boundary conditions are considered. The equation of motion becomes independent from geometry and material properties and boundary conditions, since equation is expressed in terms of dimensionless quantities. Then the equation is obtained by assuming small flexural rigidity. For this case, the fourth order spatial derivative multiplies a small parameter; the mathematical model converts to a boundary layer type of problem. Perturbation techniques (The Method of Multiple Scales and The Method of Matched Asymptotic Expansions) are applied to the equation of motion to obtain approximate analytical solutions. Outer expansion solution is obtained by using MMS (The Method of Multiple Scales) and it is observed that this solution does not satisfy the boundary conditions for moment and incline. In order to eliminate this problem, inner solutions are obtained by employing a second expansion near the both ends of the flexible beam. Then the outer and the inner expansion solutions are combined to obtain composite solution which approximately satisfying all the boundary conditions. Effects of axial speed and flexural rigidity on first and second natural frequency of system are investigated. And obtained results are compared with older studies.