• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.297-303
• /
• 2012

Samsebul, the altar portrait behind the statue of Buddha in the main building of Bonghwang temple in Andong, has been designated as Tangible Cultural Property No. 406. These alter portraits have significance as the standard of the research of Samsebul in Joseon period. In this study, fibre of the ground textile is identified using microscopic examination, solubility test, ATR-FT-IR, SEM, XRD. Two samples from Yaksabul(A, B), one sample from Seokgabul(C), and one sample from Amitabul(D), which were collected during the conservation process, were prepared for this study. In previous record, above samples were documented as hemp. Due to severe deterioration and accumulated dust layers on these samples, it was hard to recognize them with naked eyes, but through this study, we could identify that all samples except one from Yaksabul(A) are silk.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.1-11
• /
• 2019

This study examined the cause of the phenomenon of shrinkage in machine-embroidered fabrics, specifically those made of thin and pliable fabrics. Four woven fabrics and two knitted fabrics were selected as samples for analysis. The fabrics selected were silk organza, flax linen, polyester chiffon, cotton batiste, polyester raschel mesh, and cotton jersey. The thickness and drapability of the fabrics were observed and the shrinkage of the various types of embroidered fabrics produced using satin & step stitch techniques were measured. Moreover, the correlation between the shrinkage of the machine-embroidered fabrics and the drapability of the original fabrics was analyzed. Also, the colorfastness of six embroidery yarns was determined. The results of the study are as follows: first, the shrinkage of machine-embroidered fabrics increased at a greater rate than in embroidered knitted fabrics as compared to rates in embroidered woven fabrics. Moreover, in terms of stitch techniques, there was a greater shrinkage rate when satin stitch was applied compared to step stitch. Second, the shrinkage rate of machine-embroidered fabrics decreased when a stabilizer was fused onto the fabric. The shrinkage rate also decreased for fabrics when fused with paper stabilizer compared to those without it, and the rate decreased at a greater amount with paper stabilizer as compared to alginate film. Third, since there was a strong correlation between the shrinkage rate of the embroidered fabric and the drapability ratio of the original fabric, it was generally the case that the more pliable the fabric was, the greater the shrinkage rate was when the fabric was embroidered. Fourth, while the embroidery yarns mainly used in machine-embroidery presented an overall excellent level of colorfastness, there was slight color migration of level 4 to level 5 when using viscose rayon.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.3
• /
• pp.52-67
• /
• 2021

This study is an attempt to explore the roles of and the collaborative relationship between Daheojang and Maedeupjang. Daheojang and Maedeupjang share a similar manufacturing process. However, in modern times, Daheojang totally disappeared, and Maedeupjang was designated as an intangible cultural property. The present study will investigate the role of Daheojang and Maedeupjang based on the literature of the Joseon dynasty. Daheojang were craftsmen who made bands and strings of woven or twisted silk strands. They made mangsu and tassels or made knots to produce magnificent artifacts. Maedeupjang complete all steps of the process, from refining, dyeing, combining threads, daheo, maedeup, to the tassel. Daheojang in the Joseon dynasty was the center of this process. Daheojang belonged to almost all Uigwe because it used items ranging from large uso to cushion straps. Dahoe is a craft with various items and techniques. It has been widely used to produce majestic items like formal dresses, ritual ceremony pieces, and mountings, as well as daily items like jodae, pocket straps, and norigae. Based on the records of Uigwe in the late Joseon dynasty, the study explored the collaborative relationship between Daheojang and Maedeupjang. Sambang, the room where both Daheojang and Maedeupjang belong, was the room to produce the royal chair. The royal chair essentially includes large uso. The large uso is an artifact that ties a knot in a thick circle more than two meters long. While Daheojang made rounded daheo, Maedeupjang made delicate and balanced knots. Also, they produced royal inscriptions together with a royal seal with decorative mangsu and a seal of thick rounded daheo. In order to learn about traditional technology, it is necessary to study the system of the times and social trends. Therefore, the study focused on Daheojang, who were common master craftsmen during the Joseon dynasty but now are not familiar to most people.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.283-291
• /
• 2009

Methyl Bromide that was used as fumigation gas turned out to be the substance of destroying the ozone layer. For that reason, at the Montreal Protocol in 1987 the use of methyl bromide was forbidden starting 2005 in the advanced country. Also according to the 2007 Bali Protocolly methyl bromide is expected to be forbidden and therefore the purpose of this study is to find out the effects of substitution fumigation gas (Ethylene Oxide+HFC 134a, Methyl Iodide, Cyanogen and Argon) on the metal(silver, copper and iron), wood(oregon pine), pigment(yellow, red, blue, white and black), textile(hemp, ramie, jute, silk1 and silk2 / indigo, safflower and cork) and paper. After the fumigation test, ethylene oxide+HFC 134a did not have changes in the weight and color of the material itself before and after the experiment. On exterior alteration, color change occurred partly on paper and metal. Also, in most materials color change extent was 0.5 to 1.5 on the average and showed scanty difference. The materials after the fumigation test with methyl iodide did not show weight changes after the test. However, color changes more than 1.0 was shown in most of the materials especially in dyed textile material. In blue pigment, the discoloration on the surface could be seen by naked eyes. Fumigation test with cyanogen gas did not show weight changes and discoloration is more than 1.5 before and after the test. The weight changes of test materials with the argon gas was decreased about 3 to 6%. It can be observed that discoloration on paper was generated. Color changes can be seen on jute dyed with safflower and cork for two weeks with argon gas and the extent was 6.3 and 6.0.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.508-512
• /
• 1998

The NTC thermistors were sintered by using microwave hybrid heating method at $1100^{\circ}C$~$1300^{\circ}C$ and those electrical properties were investigated. The obtained $B_{25^{\circ}C/85^{\circ}C}$ values from temperature dependence of electrical resisitivity were around 3100~3200 K which were almost the same values as conventionally sintered ones. Compared with conventional sintering process, this process could complete whole sintering process within 20 minutes. This the processing time and energy consumption could be reduced through this rapid heating by using microwave hybrid heating.t there were showed only two peaks, glycolide melting peak and lower molecular weight melting peak without lauryl alcohol. Conversion increased slowly with the reaction time up to 50 minutes, and then gave a sudden increase above that. The reaction time to disappear in glycolide melting peak during polymerization was shortened with the increase of lauryl alcohol content. Zero-shear viscosity of polyglycolic acid decreased with the increase of free acid content in glycolide.ssional energy and bending hysteresis increased. \circled3 Surface characteristics such as friction coefficient and thickness variation of highly shrinkage fabrics became relatively roughened state. \circled4 Since stiffened and roughened characteristics of highly shrinkage fabrics, drapabilities of them were significantly lowered. Additionally thermal insulation property of high shrinkage fabric was higher than that of low shrinkage fabric due to bulky and thickened feature. From the results, it is considered that the silk fabrics with high filling shrinkage have the good bulkiness and heat keeping properties and thus they have the suitable characteristics for high quality men's and women's formal garments.

• The Korean Journal of Physiology
• /
• v.2 no.1
• /
• pp.39-45
• /
• 1968

Recently, in this department, pressure-displacement curve and breaking tension of dog and human tympanic membrane were studied using intact, fresh or dried tympanic membrane attached to external auditory meatus. However, physical property, proper elasticity-Young Modulus, of the tympanic membrane has not been clarified yet. Present study is attempted to further clarify proper Young Modulus of tympanic membrane, and to distinguish possible difference between layer of stratum radiatum and layer of stratum circulare of tympanic membrane in breaking tension and in Young Modulus. Tympanic membrane was excised from sacrificed dog, and preparation was made into the size of approximately 1 mm in width and 3 mm in length. In fresh or dried tympanic membrane, which was dried at $80^{\circ}C$ for 24 hrs., some preparations were made along the long axis parallel to the fibers of radial direction, and others were made along the long axis perpendicular to the radial fibers-circular direction. Breaking tension and displacement according to loading, were measured and Young Modulus was calculated in tympanic membrane preparations under the different experimental conditions. Results obtained are summarized as follows : 1. Young Modulus of fresh tympanic membrane in radial direction was $6.57{\times}10^8\;dyne/cm^2$, and that of fresh preparation in circular direction was $1.68{\times}10^8\;dyne/cm^2$. The Young Modulus of fresh tympanic membrane in radial direction resembles to that of silk and whale moustache. In dried tympanic membrane, Young Modulus of preparation of radial direction was $30.2{\times}10^8\;dyne/cm^2$ and that of preparation in circular direction was $25.0{\times}10^8\;dyne/cm^2$. 2. Breaking tension of fresh tympanic membrane was 44.9 gm/mm in radial preparation, and 7.9 gm/mm in circular preparation. In dried tympanic membrane, breaking tension was 46.7 gm/mm in preparation of radial direction, and 17.2 gm/mm in preparation of circular direction. 3. Much smaller breaking tension of the circular preparation-one fifth to the radial preparation-seemed to be responsible for the higher incidence of circular fiber breaking in tympanic membrane performation caused by trauma or sudden change in atmospheric pressure. 4. The correlation seemed to be very close between breaking tension and Young Modulus in tympanic membrane.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.3
• /
• pp.21-28
• /
• 2022

Fine dust enters the lungs or blood vessels through the respiratory tract through the air. Recently, due to the fine dust problem, the demand for air purifiers in Korea is also increasing rapidly. Moss is the oldest terrestrial plant, and it is known that it has the property of adsorbing and decomposing heavy metals and fine dust. To compare the effect of reducing fine dust between moss and the existing chemical filter (Hepa), a cube of 1 m³ was manufactured and the amount of fine dust reduction under a controlled environment was compared. Under the fine dust conditions, an umbrella moss filter, rat tail moss filter, feather moss filter, and silk moss filter were inserted for a total of 40 experiments, 10 times each in 4 different situations. The difference between the amount after 30 minutes was statistically significant for all filters. However, as a result of the test, it was confirmed that there was no statistically significant difference between filters for fine dust, mixed gas, CO₂, and O₂. In particular, it was confirmed that the previously claimed effect of oxygen generation was almost nonexistent. Through this result, it was confirmed that the reduction of fine dust is effective regardless of the species view of moss, and it is expected to replace or supplement the chemical filter of the existing air purifier through future improvement.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.45-53
• /
• 1973

1. The sericin solubility increased rapidly as the increase of water M-alkalinity. 2. The acidity of the treated water was nutralized at the over 25ppm of M-alkalinity. 3. The more M-alkalinity of the sample water is, the more M-alkalinity was found after cocoon treat. 4. The total hardness of sample water seemed to be droped as M-alkalinity increased. 5. The sericin solubility also seemed to be droped as the increase of water acidity. 6. In case of treat finish with cocoon, the acidity and total hardness seemed to increase as the acidity of the water increased, but M-alkalinity was nutralized at 20~40 ppm of water acidity or the M-alkalinity could not be found in case over 40ppm of acidity. 7. In case increase of iron component with sample water, sericin solubility seemed to drop down, and mangan component showed the same nature but dull drop. 8. After cocoon was treated with water, acidity, M-alkalinity and total hardness were increased by the extraction from cocoon shell because of pH and treating temperature but not because of iron componnent. Mangan component, however, affected as to increase of acidity and total hardness but to decrease for M-alkalinity. 9. In case change of M-alkalinity and total hardness, sericin solubility has increased also. 10. In case constant pH and total hardness, the more M-alkalinity is, the more sericin solubility was found. 11. In case constant pH, total hardness, and M-alkalinity, the more acidity is, the less sericin solubility was found. 12. In case constant pH(6.8) and M-alkalinity, the more total hardness is, the less sericin solubility was found. 13. Though the combination of water, high solubility water, medium solubility water and low solubility water were prepared. The high solubility water desolved sericin 2.2% more than low solubility water. And the medium solubility water desolved sericin as much as 2.4~2.9%. 14. It was found that the most important factors for filature water are pH, M-alkalinity, acidity and total hardness which may need more words for optimum filature water development. 15. In case of repeat use of water, the buffer action of water has increased so that the sericin solubility to be decreased.