• Journal of the Korean Chemical Society
• /
• v.57 no.3
• /
• pp.335-340
• /
• 2013

A chemical reaction of PBDEs was implemented using the polyethylene glycols (PEGs) and KOH, along with different reaction conditions such as temperatures and times. Removal efficiencies of PBDEs before and after chemical reaction were examined by difference of concentration. PBDEs was not removed at lower temperatures of 25 and $50^{\circ}C$. However, under the increased temperature, removal efficiency of PBDEs in ${\sigma}$-xylene was gradually increased, showing completely removal of PBDEs containing 5-6 bromines on biphenyl frame. When increasing the reaction conditions to 4 hours and $150^{\circ}C$, removal efficiency of PBDEs reached almost 100%. In studying the reaction of PEGs with PBDEs, it confirmed that the PBDEs led to less brominated by PEGs through a stepwise process with the successive elimination of bromines.

• Korean Journal of Metals and Materials
• /
• v.50 no.10
• /
• pp.735-743
• /
• 2012

The aim of this study was to analyze the effect of the cooling rate after heat treatment on the microstructure and mechanical properties of 2507 duplex stainless steels. Heat treatment was carried out at $1050^{\circ}C$ for 1 hr, followed by controlled cooling. The cooling rates were $175.6{\times}10^{-3}^{\circ}C/s$, $47.8{\times}10^{-3}^{\circ}C/s$, $33.3{\times}10^{-3}^{\circ}C/s$, $16.7{\times}10^{-3}^{\circ}C/s$, $11.7{\times}10^{-3}^{\circ}C/s$, $5.8{\times}10^{-3}^{\circ}C/s$ and $2.8{\times}10^{-3}^{\circ}C/s$, which resulted in variations of the microstructure, such as the fractional change of the ferrite phase and sigma phase formation. Fatigue, hardness, impact and tensile tests were performed on the specimens with different cooling rates. The precipitation of the ${\sigma}$ phase caused a hardness increase and a sharp decrease of toughness and tensile elongation. The fatigue limit of the sample with a cooling rate of $5.8{\times}10^{-3}^{\circ}C/s$ was 26 MPa higher than that of the sample with a cooling rate of $175.6{\times}10^{-3}^{\circ}C/s$. Our observations of the fracture surface confirmed that the higher fatigue resistance of the specimen with a cooling rate of $5.8{\times}10^{-3}^{\circ}C/s$ was caused by the delay of the fatigue crack growth, in addition to higher yield strength.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1334-1337
• /
• 2007

A steel pallet to carry lighter logistic articles is developed based on the DFSS(design for Six Sigma) methodology. Combining the conventional DFSS(Design For Six Sigma) methodology with that of VE(Value Engineering) is the novel feature of this paper to achieve maximum cost reduction. In this paper, systematical steps to achieve the required structural spec's are presented by conventional DMEDI(Define-Measure-Explore-Develop-Implement) process. To imply the target costing, evaluation of functions consisting of the pallet has been performed by value methodology. Then best design concept is selected in the Explore step, following structural optimization utilizing FEM. Finally the performance of prototype is investigated by pilot test in the Implement step. The developed steel pallet is being commercialized in the fields of automated ware house.

• Bulletin of the Korean Mathematical Society
• /
• v.25 no.2
• /
• pp.167-170
• /
• 1988

Versions of Tannaka duality in operator algebraic context have been obtained in [6], [8] etc. Suppose .sigma.is an automorphism of a von Neumann algebra M, on which there is an action .alpha. of a compact group G such that .sigma. vertical bar $M^{\alpha}$=id, where $M^{\tau}$is the fixed point algebra under the action .alpha.. Then it is shown that if there is an action .tau. of a group H which commutes with .alpha., and which is ergodic in the sense that the fixed point algebra $M^{\tau}$ is trivial, then there exists g.mem.G such that .sigma.=.alpha.(g). Recently Evans and Kishimoto ([4]) showed the versions of Tannaka duality in $C^{*}$-settings under some conditions.s.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.273-273
• /
• 2006

The encapsulation of volatile organic electrolytes is a major challenge in practical applications of the DSSC. Ionic liquid (IL) within polymer electrolytes is an attractive candidate for replacement. Here we used a low viscosity ionic liquid 1-ethyl 3-methylimidazolium thiocyanate in order to modify ionic conductivity (${\sigma}$) of polymer electrolyte ($PEO:Kl/l_{2}$) and hence DSSC efficiency. The doping of IL enhanced ${\sigma}$ and attained maximum (${\sigma}=7.62{\times}10^{-4}S/cm$) at 80 wt% of IL concentration. Beyond this it was harder to get stable films. XRD confirmed that the intensity of the sharp PEO crystalline peaks decreased when IL was added. The DSC studies confirmed the reduction in crystallinity by adding ionic liquid.The efficiency of solar cell using aforesaid material was 0.6 % at 1 sun irradiation.

• International Journal of Internet, Broadcasting and Communication
• /
• v.5 no.2
• /
• pp.11-14
• /
• 2013

This paper describes the sigma-delta ADC/DAC digital block with two channels. The ADC block has comb filter and three half band filters. And the DAC block has 5th Cascaded-of-Integrators Feedback DSM. The ADC and DAC support I2S, RJ, LJ and selectable input data modes of 24bit, 20bit, and 16bit. It is fabricated with 0.35um Hynix standard CMOS cell library. The chip size is 3700*3700um. It has been verified using NC Verilog Simulator and Matlab Tool.

• Journal of Industrial Technology
• /
• v.13
• /
• pp.49-57
• /
• 1993

Bending fatigue tests were carried out on the specimenes with two different strength levels in order to investigate small crack growth rate. The main results obtained are as follows : (1) Small crack growth law, $da/dn=C{\sigma}_a{^n}a$ is useful several materials, but is not the rule applicable to all cases generally. (2) When da/dn in several specimens are equal, COD near the crack tip are also nearly equal. (3) Crack tip opening displacement(CTOD) is the main factor to control the small crack growth rate, and da/dn ${\propto}$ CTOD comes into being between the two. Accordingly, $da/dn=C({\sigma}_a{^2}/{\sigma}_s){^n}a^n$ shows the small crack growth rate being reflected crack closure phenomenon.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.719-723
• /
• 1996

In this research, The statistical characteristics of non-heated and nitro-carburized specimens are investigated under two stress levels (1.15 .sigma. $_{w}$ .leq. .sigma.$_{\alpha}$ .leq. 1.25 .sigma. $_{w}$). Seven specimens of each stress level are tested by rotary bending fatigue machine. The cycles about each crack length and crack propagation rate are used as statistical variagle of weibull distribution. By using concept of reliability function, reliable S-N formula of Nitro-Carburized specimen are gotten.ten.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2010.04a
• /
• pp.310-320
• /
• 2010

In this study, factors affecting the development of new products and research about the relevance of the factors based on the research model was configured. Existing research and technology commercialization process of discrimination that occur in the importance of risk management and open innovation company's competitive advantage in new product development and affect the reporter know what the effect is used as a control variable effects. Factor in the development of new products through research and innovation capacity and knowledge management activities, the introduction of open innovation and enterprise level ever due to the level of risk management controls and the need for effective research to study the model was proposed.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2002.06b
• /
• pp.55-55
• /
• 2002

An alternative sigma factor as encoded by the $\sigma$$\^$B/ gene in Streptomyces coelicolor A3(2) was known to be involved in the differentiation and osmotic stress response. Protein expression profiles of wild-type and a $\sigma$$\^$B/ mutant strain of S coelicolor A3(2), which is impaired in defense against osmotic stress, were compared in the absence and presence of osmotic stress, using 2-dimentional gel electrophoresis.(omitted)