• 제목/요약/키워드: Side Rail

검색결과 145건 처리시간 0.03초

Lung RPO 선량전달시, Carbon Couch Side Rail과 Vac-lok이 미치는 영향 (Effect of Carbon Couch Side Rail and Vac-lok In case of Lung RPO irradiation)

  • 김석민;곽근탁;이승훈;김정수;권형철;김양수;이선영
    • 대한방사선치료학회지
    • /
    • 제30권1_2호
    • /
    • pp.27-34
    • /
    • 2018
  • 목 적 : 폐의 우측후사방향 선량전달시, Carbon Side Rail과 환자 고정기구인 Vac-lok이 미치는 영향을 보고자 한다. 대상 및 방법 : Vac-lok의 오른쪽 부분을 10, 20, 30 mm 두께로 제작하였다. 측정은 유리선량계를 이용하여 측정하였고, 측정점은 팬텀 우측 폐의 center Point를 기준으로 좌, 우, 하, 상 방향 각각 A, B, C, D Point로 설정 하였다. 각 point에 유리선량계를 삽입한 후 couch의 Side Rail을 외측(Out)으로 뺀 후 vac-lok을 놓지 않은 no vac-lok, 그리고 10, 20, 30 mm의 vac-lok 위에 팬텀을 세팅하였다. 중심점에 6 MV 광자선을 조사야 $10{\times}10cm^2$, SAD 100 cm, 겐트리 각도 $225^{\circ}$로 하여 300 MU/min 선량률과 100 MU 조사선량을 전달하였다. 측정은 5회씩 실시하였고, 마찬가지로 Side Rail을 내측(In)으로 넣은 후 각 point에 대해서도 같은 조건으로 5 회씩 측정하여 평균값을 산출하였다. 결 과 : side rail에 따라서는 중심점, A, B, C, D Point 각각 -11.8 %, -12.3 %, -4.1 %, -12.3 %, -7.3 %의 선량 감소를 보였다. Side-Rail-Out에서 10 mm vac-lok의 경우 약 -0.9 %가 감소되었고, 20 mm vac-lok 사용 시 약 -2.0 %, 30 mm vac-lock 사용 시 약 -3.0 %가 감소되었다. Side-Rail-In에서 10 mm vac-lok의 경우 약 -1.0 %가 감소되었고, 20 mm vac-lok 사용 시 약 -2.1 %, 30 mm vac-lok 사용 시 약 -3.0 %가 감소되었다. Side-Rail-In 상태의 no vac-lok 선량 값을 기준으로 Side-Rail-Out 상태의 10, 20, 30 mm vac-lok을 사용할 때, side rail에 대한 선량 감소에 더하여 중심점에서는 약 -0.9 %, -1.8 % -2.4 %, A point에서는 -0.5 %, -1.6 %, -2.1 %, B point에서는 약 -0.9 %, -2.0 %, -3.2 %, C Point에서는 -1.0 %, -2.1 %, -3.1 %, D point에서는 약 -1.0 %, -1.6 %, -3.1 %의 추가적인 선량 감소를 나타냈다. 결 론 : 폐를 비롯한 우측후사방향 방사선 치료 시 side rail에 대해 주의를 기울이고, vac-lok 제작 시 vaclok 두께에 대해 관심을 갖는다면 더 나은 치료 효과를 기대해 볼 수 있으리라 사료된다.

  • PDF

배면횡압에 대한 분기기의 성능 비교 (Comparison of Performance of Turnout for Wheel Back Side Pressure)

  • 문경호;정우진;목재균
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 추계학술대회 논문집
    • /
    • pp.830-835
    • /
    • 2004
  • In railway systems, the performance of turnout is one of the most important factors to improve the train's speed. Standard turnout, in which one track is split in main track side and turnout side. Because the main track side remains linear, speed restriction can be alleviated while train pass the main track side. The factors of speed restriction in main track side are strength of crossing and tongue rail, wheel back side pressure of guard rail and wing rail. In this study, we measured wheel back side pressure of guard rail to compare improved turnout with present turnout. In result, the wheel back side pressure of improved turnout was lower than present turnout, so its performance was proved.

  • PDF

조립식(組立式) 탁자(卓子)의 CBA접합부(接合部) 강성(剛性)에 관(關)한 연구(硏究) (A Study on the Stiffness of CBA(Corner Block with Anchor Bolt) Joint in Knockdown Type Table Furniture)

  • 정우양;이필우
    • Journal of the Korean Wood Science and Technology
    • /
    • 제17권2호
    • /
    • pp.34-64
    • /
    • 1989
  • 포장(包裝) 용적(容積) 감소에 따른 수송비(輸送費) 절감(節減) 효과(效果)가 있어 조립시(組立式) 탁자류(卓子類) 가구(家具)의 제작(製作)에 널리 쓰이는 CBA(corner block with anchor bolt) 접합방식(接合方式)은 일정기간(一定期間) 사용(使用)함에 따라 접합부위(接合部位)가 약해지고 그 결과(結果) 구조(構造)가 불안정(不安定)하게 되는 반강접합(半剛接合)(semi-rigid joint) 특유(特有)의 결점(缺點)도 지니고 있다. 따라서 본(本) 연구(硏究)에서는 CBA 접합(接合) 강도(强度)에 영향하는 주요(主要) 설계(設計) 인자(因子)로서 side rail 규격, corner block의 side rail에의 부착시(時) 보강재(補强材)의 효과(效果) 및 corner block관통 anchor bolt의 사용(使用) 수(數) 그리고 corner block의 형태등(等)의 평가(評價)를 하기 위해 22개(個)의 접합군(接合群) 별(別)로 총(總) 88개(個)의 table section 시험체(試驗體)를 제작(製作)한 후(後)그들의 강성(剛性) 계수(係數)(Z - 값) 및 유효강도(有效强度)를 수평 하중(荷重)에 의한 변형측정(變形測定) 실험(實驗)을 통해 결정(決定)한 후 설계(設計) 인자별(因子別) 효과(效果)를 비교 분석(分析)하였다. 분석결과(分析結果), side rail의 높이 증대(增大) 및 corner block 부착시(時) PVAc 수지(樹脂)의 사용효과(使用效果)가 뚜렷하여 유효강도(有效强度)의 유의적(有意的) 향상(向上)을 나타냈고 anchor bolt의 효과(效果) 역시 2개 사용시(使用時)가 1개 사용시(使用時) 보다 훨씬 큰 것으로 나타났다. 또 side rail 높이 와 anchor bolt 사용(使用) 수(數)간에는 상호작용(相互作用) 효과(效果)도 있었다. 그러나 side rail의 두께 효과(效果)는 22mm에서 25mm로 증대(增大)시켰을때 뚜렷한 상승 경향(傾向)은 보여주지 못했다. 한편 corner block의 형태는 MDF를 주재료(主材料)로 사용(使用)한 탁자(卓子) 설계시(設計時)는 두께 25mm, 높이 100mm의 side rail에 PVAc 수지(樹脂)로 보강(補强)하고 mitered corner block에 2개(個)의 anchor bolt를 관통시킨 경우가 유효강도(有效强度) 3171.7 kgf-cm로 22개의 접태군(接台群)들 중 최대치(最大値)를 나타냄으로써 miter type이 rectangular type보다 바람직한 것으로 나타났다. 결론적(結論的)으로 자재(資材)의 효과적(效果的) 이용(利用)을 통한 생산비(生産費) 절감(節減)과 동시(同時)에 구조(構造)의 안정(安定)된 강도적(强度的) 측면(側面)을 고려할 때, 두께 22mm, 높이 75mm의 MDF side rail에 mitered corner block을 PVAc 수지(樹脂)와 나사못을 이용하여 부착한 후(後) 2개(個)의 anchor bolt를 관통시키는 방법(方法)을 가장 합리적(合理的)인 MDF 사용(使用) 조립시(組立式) 탁자(卓子) 설계(設計) 방안(方案)으로 제시(提示)하는 바이다.

  • PDF

Continous rail absorber design using decay rate calculation in FEM

  • Molatefi, Habibollah;Izadbakhsh, Soroush
    • Structural Engineering and Mechanics
    • /
    • 제48권4호
    • /
    • pp.455-466
    • /
    • 2013
  • In recent years, many countries have added railway noise to the issues covered by noise regulations. It is known that the rail is the dominant source of rolling noise at frequency range of 500Hz-2000Hz for the conventional speeds (<160km/h). One of the effective ways to reduce noise from railway track is using a rail vibration absorber. To study the acoustic performance of rail absorber, the decay rates of vibration have long been used by researcher. In this paper, A FE model of a periodic supported rail with infinite element in ABAQUS is developed to study the acoustic performance of the rail absorber. To compute the decay rates, acceleration responses along the rail transferred to MATLAB to obtain response levels in frequency domain and then by processing the response levels, the decay rates obtained for each1/3octav band. Continous rail absorber is represented by a steel layer and an elastomer layer. The decay rates for conventional rail and rail with one-side absorber and also, the rail with two side absorber are obtained and compared. Then, to improve the system of rail absorber, a steel plate with elastomer layer is added to bottom of the rail foot. The vertical decay rate results show that the decay rate of rail vibration along the track is significantly increased around the tuned frequency of the absorber and thus the rail vibration energy is substantially reduced in the corresponding frequency region and also effective in rail noise reduction.

치료계획 시스템을 이용한 Varian Standard Couch 모델링의 유용성 평가 (The evaluation for the usability ofthe Varian Standard Couch modelingusing Treatment Planning System)

  • 양용모;송용민;김진만;최지민;최병기
    • 대한방사선치료학회지
    • /
    • 제28권1호
    • /
    • pp.77-86
    • /
    • 2016
  • 목 적 : 방사선 치료 시 Carbon Fiber Couch에 의한 감약이 일어난다. 본 연구에서는 치료계획 시스템(Treatment Planning System: TPS)을 이용해 Varian사의 Varian Standard Couch(VSC)를 모델링 하여 유용성을 평가하고자 한다. 대상 및 방법 : 선형가속기(Clinac IX, VARIAN, USA)의 CBCT(Cone Beam Computed Tomography)를 이용하여 VSC의3가지 조건Side Rail Out Grid(SROG), Side Rail InGrid(SRIG), Side Rail In OutSpine Down Bar(SRIOS)로 스캔 한 후 TPS(Pinnacle9.8, Philips, USA)로 전송하여 Side Rail, Side Bar Upper, Side Bar Lower, Spine Down Bar를 Automatic Contouring하여 모델링 하였다. 전산화 단층촬영(Light Speed RT 16, GE, USA)으로 스캔 한 Cheese Phantom(Middelton, USA) 을 TPS로 전송하여 모델링 한 VSC를 적용하였다. 측정 점은 Cheese Phantom내의 Ion Chamber(A1SL, Standard imaging, USA)이며 Isocenter에 위치시켜 Energy(4, 10MV), Gantry Angle($5^{\circ}$간격으로 측정), Field Size($3{\times}3cm^2$, $10{\times}10cm^2$)에 변화를 주어 각 100MU의 동일한 조건에서 얻은 계산 값과 측정값을 비교하였으며 Side Bar Upper에 의한 감약을 비교하기 위해 SRIG조건에서 $127^{\circ}$를 포함하였다. 결 과 : CBCT를 이용해 얻은 VSC의 Density를 TPS에서 확인한 결과 $0.9g/cm^3$였으며 Spine Down Bar의 경우 $0.7g/cm^3$로 나타났다.Side Rail, Side Bar Upper, Side Bar Lower, Spine Down Bar에서 각 17.49%, 16.49%, 8.54%, 7.59%의 감약이 일어났으며모델링의 정확성을 평가하기 위해 계산 값과 측정값을 비교한 결과 평균 1.13%의 오차가 보였으며 Spine Down Bar를 지나는 $170^{\circ}beam$에서 1.98%로 가장 많은오차를 보였다. 결 론 : TPS이용해 모델링 한 VSC의 유용성을 평가하기 위해계산 값과 측정값을 비교한 결과 최대1.98%의 오차를 보였다. 방사선 치료계획 시 VSC를 모델링 하여 적용한다면선량에 대한 예측이 가능해 더욱 정확한 치료를 하는데 도움이 될 것으로 사료된다.

  • PDF

노인요양병원에서의 침대난간(Side Rail) 사용에 대한 환자가족의 인식 (Family Member's Perceptions of Side Rail Use in Geriatric Hospital)

  • 이금재;박경숙;박연숙
    • 디지털융복합연구
    • /
    • 제14권12호
    • /
    • pp.503-513
    • /
    • 2016
  • 본 연구는 노인요양병원에 입원한 환자가족들이 환자의 침대난간 사용을 어떻게 인지하고 있는지를 기술하고 탐색하기 위해 시도되었다. 수집된 자료는 심층면담을 이용하였고, Cavanagh의 내용분석(content analysis)방법으로 분석하였다. 연구결과 노인요양병원에서 침대난간 사용에 대한 환자가족의 인식은 예방적 안전, 이동의 편리함, 의례적인 간호, 감옥같은 생활, 부상위험, 침대난간의 대체 가능한 대안의 6가지 주제로 도출되었다. 관습화된 침대난간 사용의 긍정적 효과가 침대난간 사용에 대한 환자 가족들의 부정적 견해보다 중요하게 생각되고 있다는 점을 연구를 통해 알 수 있었고, 병원관계자들이 환자개인의 자유, 신체적 속박, 속박에 대한 부작용, 대안에 대한 이슈에 대해 환자와 환자가족들과 의사결정을 함께 할 것을 제안하고자 한다. 병원의 의료환경 변화로 인해, 의료행위의 효과성과 효율성, 위험관리, 그리고 근거기반실무가 강조되고 있다. 그러나 침대난간 사용이나 신체적 속박 문제는 해답을 쉽게 찾을 수 없는 주제이며 간호사들은 침대난간 사용에 있어 엄격한 사용지침에 따라 명확하게 간호행위를 수행해야 할 것이다.

고무차륜 AGT 경량전철 차량-주행궤도 안전성 평가 (Safety evaluation of rubber-tired AGT light rail vehicle-running track)

  • 임태건;김연수;이안호;김지명
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.1644-1647
    • /
    • 2005
  • This study was aimed at evaluating the structural safety for rubber tired AGT system. Based on these, AGT system which was developed for first time in domestic is need to verify structural safety. So we measured the characteristics of guide-rail, switch rail, side wall in the constructed test track for rubber tired AGT system. Finally, all results of test showed that structural safety of the rubber tired AGT system.

  • PDF

고속충돌시험기 개발 및 부재의 충돌특성 실험에 관한 연구 (I) (A Study on the Development of Test Rig for High Speed Frontal Crash and Test of Members ($\textrm{I}$))

  • 강신유;장인배;김헌영;정규진;박경환
    • 한국정밀공학회지
    • /
    • 제17권6호
    • /
    • pp.119-126
    • /
    • 2000
  • In this paper. a simple high-speed crash test rig for members of vehicle was developed for the improvement of crashworthiness of vehicle's side rail. The cart hanging the specimen is accelerated up to 35 mph by the force of freely dropping weight and 1:3 accelerating pulleys. The cart with shock absorbers travels on the rail roads, so it does not transfer any additional vibration to the specimen. To measure the test results, two types of accelerator are considered. the one is a strain gage type and the other is a piezo type. The test rig is rated good to test the specimen like a side rail of vehicle as developing the vehicle's structures in the early design stage.

  • PDF

A Study on the Development of Test Rig for High Speed Frontal Crash and Test of Members

  • Shin-You. Kang;In-Bae. Chang;Jang, Hye-Jeong
    • International Journal of Precision Engineering and Manufacturing
    • /
    • 제3권3호
    • /
    • pp.21-27
    • /
    • 2002
  • In this paper, a simple test rig of high-speed crash for the front members of vehicles was developed for the improvement of crashworthiness of vehicle's side rail. The cart hanging the specimen is accelerated up to 35 mph by the traction wire and by the force of freely dropping weight and 1:3 accelerating pulleys. The cart with shock absorbers travels on the rail roads, so it does not transfer any additional vibration to the specimen. In order to measure the energy absorbed by the specimen when it collapse to the wall and during it deform, the two strain gage type load cells are used at the wall place. The test rig rated good to test the specimen like a side rail of vehicle as developing the vehicle's structures in the early design stage.

온간하이드로포밍을 이용한 알루미늄 자동차부품 제조기술 개발 (Development of Manufacturing Technology for Aluminum Automotive part with Warm Hydroforming)

  • 손성만;이문용;김봉준;문영훈;이영선
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2006년도 제5회 박판성형 SYMPOSIUM
    • /
    • pp.93-98
    • /
    • 2006
  • Warm forming technology was classified into hot gas forming of using compressible fluid as a nitrogen gas and warm hydroforming of using the incompressible fluid as a thermal oil by using medium fluid. In this study, the aluminum side-rail part was developed with warm hydroforming technology. For the warm hydroforming system, top and bottom die was designed to insert heating cartridge in die cavity and special indirect fluid heating system was designed to heat the thermal oil. As increase the temperature, hydroformability was increased linearly. Aluminum side-rail center part was formed 90% at the internal pressure of 100bar and perfectly formed at 300bar within a moderate temperature. The tube material used for warm hydroforming was a aluminum 6000 series alloy with the diameter of 120mm, thickness of 5mm, length of 1,300mm. Warm hydroformed side-rail center part had 20% of maximum expansion ratio and below 20% of maximum thinning ratio at corner radius. This results were provided to show warm hydroforming possibility for aluminum automotive components.

  • PDF