• 한국농공학회지
• /
• 제21권2호
• /
• pp.81-103
• /
• 1979

The weathered granite soil involves problems in its stability in soil structures depending upon the reduction of soil strength due to the water absorption, crushability, and content of colored mineral and feldspar. As an attemt to solve the problems associated with soil stability, the crushability of weathered granite soil was investigated by conducting tests such as compaction test, CBR test, unconfined compression test, direct shear test, triaxial compression test, and permeability test on the five soil samples different in weathering and mineral compositions. The experimental results are summarized as follows: The ratio of increasing dry density in the weathered granite soil was high as the compaction energy was low, while it was low as the compaction energy was increased. The unconfined compressive strength. and CBR value were highest in the dry side rather than in the soil with the optimum moisture content, when the soil was compacted by adjusting water content. However, the unconfined compressive strength of smples, which were compacted and oven dried, were highest in the wet side rather than in soil with the optimum moisture content. As the soil becomes coarse grain, the ratio of specific surface area increased due to increased crushability, and the increasing ratio of the specific surface area decreased as the compaction energy was increased. The highest ratio of grain crushability was attained in the wet side rather than in the soil with the optimum moisture content. Such tendency was transforming to the dry side as the compaction energy was increased. The effect of water on the grain crushability of soil was high in the coarse grained soil. The specific surface area of WK soil sample, when compacted under the condition of air dried and under the optimum moisture content, was constant regardless of the compaction energy. When the weathered granite soil and river sand with the same grain size were compacted with low compaction energy, the weathered granite soil with crushability had higher dry density than river sand. However, when the compaction energy reached to certain point over limitation, the river sand had higher dry density than the weathered granite soil. The coefficient of permeability was lowest in the wet side rather than in the optimum moisture content, when the soil was compacted by adjusting soil water content. The reduction of permeability of soil due to the compaction was more apparent in the weathered granite soil than in the river sand. The highly significant correlation coefficient was obtained between the amount of particle breakage and dry density of the compacted soil.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.113-121
• /
• 2010

Granular Compaction Pile are commonly used to improve bearing capacity and reduce settlements of soft soil in coastal and lowland areas. In this paper, through the field load test results of straight granular compaction piles and taper granular compaction piles, material properties of ground and GCP for numerical analysis were drawn and numerical model was established. In the numerical analysis of taper granular compaction piles with 3 different sections, a optimum dimension of taper granular compaction pile was considered at the side of settlement.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1037-1047
• /
• 2013

다짐 에너지에 따른 노반 성토재의 탄성파 속도변화 특성을 규명하기 위하여 다양한 위치에서 채취한 시료를 이용하여 실내 다짐 시험, 실내 탄성파 측정 시험, 현장 탄성파 측정 시험을 실시하였다. 함수비 변화에 따른 압축파와 전단파 속도 변화 곡선은 다짐 곡선과 유사한 형태를 보인다. 다짐에너지가 100 %이상 되는 조건에서는 다짐 에너지가 증가하더라도 습윤 측의 다짐곡선과 탄성파 속도 곡선에 큰 변화가 없다. 압축파의 경우 건조 측에서 건조단위중량이 증가함에 따라 압축파 속도가 선형적으로 증가하는 양상이 나타나지만, 습윤 측에서는 건조단위중량이 증가함에 따라 지수함수의 형태로 압축파 속도가 비선형적으로 증가한다. 현장 시험으로 측정한 탄성파 속도는 구속압이 증가함에 따라 증가하며, 압축파 속도보다는 전단파 속도가 다짐 에너지 수준에 보다 민감하게 변화한다.

• 산업기술연구
• /
• 제22권B호
• /
• pp.211-218
• /
• 2002

The paper is to show the behavior of composit ground which is installed with sheet pile in soft soil improved by sand compaction pile. The results of load-settlement relationship, earth pressure, stress concentration characteristics, and final water content were obtained by centrifuge model test. Two cases of tests, installation of sheet pile on the corner and both side of the loading plate for the improved SCP ground which was designed twice of the footing width, were performed for the tests under the vertical and horizontal loading and both side of corner. Finite element program(CRISP) for sand compaction pile using elasto-plastic model and numerical analysis for soft soil using modified cam-clay constitutive equation were compared and analized with the results of model tests. The result of analysis show the increased bearing capacity of soil after, SCP and sheet pile was installed.

• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.133-142
• /
• 2011

본 연구에서는 국토해양부 기준으로 제시된 선회 다짐횟수를 가열아스팔트 혼합물과 중온아스팔트 혼합물을 이용하여 검증하는데 그 목적이 있다. 다짐횟수 검증을 위하여 굵은골재최대치수 13mm와 19mm 1등급 골재와 가열아스팔트 혼합물용 PG64-22와 PG76-22, 중온아스팔트 혼합물용 PG70-22 아스팔트를 사용하였다. 또한, 각각의 바인더 별로 권장 다짐온도를 기준으로 4가지 온도에서 선회다짐 100회와 마샬다짐 75회의 다짐량을 비교하였다. 두 다짐기를 공극률 상으로 평가할 때 전반적으로는 선회다짐기의 다짐이 다소 더 잘 되었다. 공극률에 대한 분산분석 결과 두 다짐기 사이에 19mm 혼합물에서는 통계적 유의차가 나타났고 13mm의 경우 유의차가 나타나지 않았다. 특히 일정 다짐온도 이하에서 다졌을 경우 두 다짐기 모두 다짐이 불량하여 다짐온도를 확보하여 다짐하는 것이 매우 중요한 것으로 나타났다. 따라서, "가열 아스팔트 혼합물의 생산 및 시공"에서 제시한 선회 다짐횟수 100회는 지침에서 제시한 아스팔트 혼합물의 다짐온도를 준수한다면 마샬다짐기 양면 75회 다짐과 유사하거나 다소 좋은 다짐 량을 나타내는 것을 알 수 있었다.

• 한국농공학회논문집
• /
• 제57권4호
• /
• pp.85-99
• /
• 2015

It is urgent to redevelop the superannuated reservoir levee through the levee raising for countermeasure to climate change and improvement of storage capacity of reservoir. However, low compaction degree of the raised reservoir levee owing to poor construction condition leads to degradation of the stability of the reservoir levee on seepage and earthquake. In this study, seepage and seismic behavior of raised reservoir levee with low compaction degree was evaluated through numerical simulation. From the simulated results, water level raising possibly induces crack and/or sinkhole on the surface of the poorly-compacted raised reservoir levee owing to the increase of the subsidences at the crown and the front side of that. In addition, relatively larger displacement and acceleration response at the front side of raised reservoir levee in seismic condition may degrade overall stability of reservoir levee. Therefore, reasonable construction management for the compaction of the raised reservoir levee is required for ensuring long-term stability on seepage and earthquake.

• 생물환경조절학회지
• /
• 제6권4호
• /
• pp.258-263
• /
• 1997

정식기에 의한 플러그묘 정식시 최적활착을 나타내는 관수량, 진압상태 등을 구명하여 관련정식기 개발과 최적 생육관리를 위한 기초자료를 획득하고자 기초시험과 포장실험을 실시한 결과를 요약하면 다음과 같다. 1. 작물별 정식 성공률은 정식호퍼 크기별로는 유의성이 없으며, 작물의 초장과 관련이 크며, 반자동 정식기의 최대 정식가능초장은 30cm, 최적초장은 28cm 이내로 조사되었으며, 고추와 배추 공히 정식시 관수 작업을 실시하려면 큰 규격의 호퍼가 적당할 것으로 판단되었다. 2. 정식 후 10일이 지난 상태에서 플러그묘의 생존율은 토양수분에 의한 영향이 크며, 고추의 경우 15%이상의 토양수분에서는 98%이상의 생존율을 보였고, 배추의 경우 16% 이상의 토양수분에서는 96% 이상의 생존율을 나타내었다. 그러나 고추와 배추를 심은 토양이 거의 완전 건조한 상태인 3.8%, 3.1% 각각의 토양수분에 대하여 15%와 14%의 생존율을 나타내었다. 따라서 토양수분 18% 이상에서는 정식시 관수가 필요 없고, 13%에서는 50cc 이상 관수가 필요하며, 토양의 수분이 3.8%이하일 때는 100cc 이상 초기관수 후 3일 내에 재관수가 필요할 것으로 판단되었다. 3. 좌우진압, 전후좌우진압의 생존율 차이는 없었으므로 현재의 반자동정식기 진압방식(좌우진압)의 개선은 필요하지 않았다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.175-182
• /
• 2002

The cement injection technology on the purpose of ground reinforcement and cut-off has been used in construction sites until now. However, recently it is applied to prevent leakage of underground structure. In this study, applicability of the back side waterproof grouting method was verified through performing field model tests and reviewing case histories. From the results of this study, injection shape of the back side waterproof grouting method was appeared to be root type, and waterproof effect by injection of cement grout material was excellent because grout material infiltrated into boundary between wall of structure and back side ground to be waterproof layer. Components influencing infiltration of injection material are type of soil and degree of compaction. For effective injection, injection pressure has to vary gradually from high pressure to low pessure and small quantity of injection material has to be injected for long times. Also, spacing of injection hole must be designed considering condition of back side ground, injection area, W/C ratio, the number of injection and injection pattern properly.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.411-418
• /
• 2002

In domestic road construction sites, the compaction control based on strength are widely performed through the direct method with high accuracy, such as Plate Loading Test or Field CBR test. It is impossible to manage all construction sites using the direct method because the direct method requires heavy reaction loads and long measurement time. Therefore, it is necessary to apply the indirect method that could control the relative density of construction sites on the whole. Indirect methods, such as Cone Penetration Test and Fall Cone Test, require extra time for data analyzing and fixed area for test device. In this paper, the field applicability of Soil Impact Hammer (SIH) was investigated comparing with the results of field measurement tests and laboratory compaction tests. SIH developed by Japan Construction Administration and Asanuma Ltd., is a kind of indirect methods for compaction checking. According to the results of SIH performed in domestic road construction site, the subgrade reaction modulus obtained from SIH are similar to that from Plate loading tests in the range of 10 to 40. In comparison with laboratory compaction test, similar compaction line are shown in the dry side of optimum moisture contents.

• 펄프종이기술
• /
• 제38권5호
• /
• pp.9-15
• /
• 2006

Wet compaction test (WCT) is a fiber evaluation method where wet fibers are compressed at one side of a cylinder and water drains out from the other side. The consistency of the fiber furnishes and their pressures are recorded during the test. In the previous study we found that WCT results always gave better coefficients of determination in fiber furnish drainage, and paper properties (density, tensile, tear, and burst strength) than those of WRV (water retention value). Fiber freeness and fiber length correlated well with drainage and tear strength of the furnishes, respectively; however, their correlations were very much improved by combining the WCT results. In this study, we used the WCT test for fractionated fiber furnishes to see whether improvement of the WCT is possible. We found that strength properties such as breaking length and burst index were correlated better with the fractionated long fiber furnishes. Drainage was greatly affected by the presence of short fiber furnishes. We used bleached chemical pulps (SwBKP, HwBKP), recycled pulp (OCC), and mechanical pulp (BCTMP) as fiber furnishes in this study. Fiber fractionation can be performed on-line in these days by using multifractor and WCT can be used as an on-line test in papermachine in the future.