• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.690-693
• /
• 2003

An Si substrate (100) was oxidized at $400^{\circ}C$ in inductively coupled oxygen plasma. Interstitial oxygen was found in the Si substrate at the initial stage of oxidation by IR measurements. An x-ray rocking curve of Si substrates showed a lower peak intensity due to lattice distortion by the interstitial oxygen. The refractive index of thin oxides, below which interstitial oxygen existed in the Si substrate, was smaller than the refractive index of thick oxides, below which no interstitial oxygen existed. The interstitial oxygen was found by plasma oxidation using $O_{2}$ gas and $N_{2}O$ gas. The inductively coupled plasma oxidation using $N_{2}O$ gas was performed by atomic oxygen, not by molecular oxygen, indicating that atomic oxygen in plasma is responsible for the incorporation of interstitial oxygen.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.2
• /
• pp.47-51
• /
• 2007

F-doped SiOC : H thin films with low refractive index were deposited on Si wafer and glass substrate by plasma enhanced chemical vapor deposition (PECVD) as a function of rf powers, substrate temperatures, gas rates and their composition flow ratios ($SiH_4,\;CF_4$ and $N_2O$). The refractive index of the F-doped SiOC : H film continuously decreased with increasing deposition temperature and rf power. As $N_2O$ gas flow rate decreased, the refractive index of the deposited films decreased down to 1.3778, reaching a minimum value at rf power of 180W and $100^{\circ}C$ without $N_2O$ gas. The fluorine content of F-doped SiOC : H film increased from 1.9 at% to 2.4 at% as the rf power was increased from 60 W to 180 W, which results in the decrease of refractive index.

• Korean Journal of Crystallography
• /
• v.6 no.2
• /
• pp.134-140
• /
• 1995

SAW properties of SiNx/ZnO bilayer thin film structure were analyzed. ZnO thin films were deposited by rf magnetron sputter using O2 gas as an oxidizer. Structure of ZnO thin films was affected by Ar/O2 ratio. At the gas ratio of Ar/O2=67/33, the standard deviation of X-ray rocking curve of (002) preferred ZnO thin film was 2.17 degree. This value is sufficient to use ZnO thin films as an acoustic element. SAW velocity of glass/SiNx(7000Å)/Al/ZnO(5μm) structure was max. 2.2% faster than that of ZnO/glass.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.283-284
• /
• 2008

Electrical and optical characteristics of indium tin oxide (ITO) and indium zinc oxide (IZO) films without and with $(SiO_2)_3(ZnO)_7$ at.% (SZO) film deposited on poly(ethylene naphthalate) (PEN) and poly(ethylene terephthalate (PET) substrates as a gas barrier layer for flexible display were studied. The ITO and IZO films with SZO gas barrier layer showed the improved properties which were both the high transmittance of average 80% in the visible light range and the decreased sheet resistance as compared to those of ITO and IZO films without SZO layer. Particularly, the PEN substrate with only SZO gas barrier layer had a low water vapor transmission rate (WVTR) of $\sim10^{-3}g/m^2$/day. Thus, we suggest that the SZO film with protection ability against the water vapor permeation can be applied to gas barrier layer for flexible display.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.12
• /
• pp.882-887
• /
• 2013

We investigated a SiC-based hydrogen gas sensor with metal-insulator-semiconductor (MIS) structure for high temperature process monitoring and leak detection applications. The sensor was fabricated by Pd/$Ta_2O_5$/SiC structure, and a thin tantalum oxide ($Ta_2O_5$) layer was exploited with the purpose of sensitivity improvement, because tantalum oxide has good stability at high temperature as well as high permeability for hydrogen gas. In the experiment, dependence of I-V characteristics and capacitance response properties on hydrogen gas concentrations from 0 to 2,000 ppm was analyzed at room temperature to $500^{\circ}C$. As the result, our sensor exploiting a $Ta_2O_5$ dielectric layer showed possibilities with regard to use in hydrogen gas sensors for high-temperature applications.

• Journal of Sensor Science and Technology
• /
• v.16 no.3
• /
• pp.197-201
• /
• 2007

The magnetron reactive ion etching (RIE) characteristics of polycrystalline (poly) 3C-SiC grown on $SiO_{2}$/Si substrate by APCVD were investigated. Poly 3C-SiC was etched by $CHF_{3}$ gas, which can form a polymer as a function of side wall protective layers, with additive $O_{2}$ and Ar gases. Especially, it was performed in magnetron RIE, which can etch SiC at a lower ion energy than a commercial RIE system. Stable etching was achieved at 70 W and the poly 3C-SiC was undamaged. The etch rate could be controlled from $20\;{\AA}/min$ to $400\;{\AA}/min$ by the manipulation of gas flow rates, chamber pressure, RF power, and electrode gap. The best vertical structure was improved by the addition of 40 % $O_{2}$ and 16 % Ar with the $CHF_{3}$ reactive gas. Therefore, poly 3C-SiC etched by magnetron RIE can expect to be applied to M/NEMS applications.

• Journal of the Korean Ceramic Society
• /
• v.31 no.8
• /
• pp.886-892
• /
• 1994

Structural and electrical properties of BaTiO3 thin films deposited on Pt/SiO2/Si substrates by RF magnetron sputtering method have been investigated. Crystallization behavior and electrical properties were studied for the films deposited under various sputtering gas compositions (Ar+O2 gas mixture) and substrate temperatures. All the films deposited above 50$0^{\circ}C$ were all crystallized and their preferred orientation changed from (001) to (111) with the addition of oxygen gas. The dielectric constant of films deposited in pure argon was about 110 and showed little dependence on the substrate temperature. But that was increased as the ratio of O2/Ar increased and its substrate temperature dependence was discernible. The highest dielectric constant reached to 550. In addition, the films deposited in mixed gas showed stable dielectric properties against the frequency and temperature.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.156-156
• /
• 1997

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1301-1303
• /
• 1997

This study was performed to investigate the deposition mechanism of $SiO_2$ by ArF excimer Laser(193nm) CVD with $Si_2H_6$ and $N_2O$ gas mixture and evaluate Laser CVD quantitatively by modeling. In this study, new model of $SiO_2$ deposition process by Laser CVD is introduced and deposition rates are simulated by computer with the basis on this modeling. And simulation results are compared with experimental results measured at various conditions such as reaction gas ratio, chamber pressure, substrate temperature and laser beam intensity.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1555-1557
• /
• 2004

The Pt-doped $SnO_2$ thin film for CO sensor applications obtained by RF sputtering from a target of the same compound in an Ar-$O_2$ atmosphere. Pt-SnO2-SiC Schottky diode detection of CO gas Cause the remarkable change in electrical resistivity of the semiconductor. the good gas sensitivity is shown when annealing condition is 600$^{\circ}C$, 1hr in RTP and detected temperature is 350$^{\circ}C$.