• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.436-437
• /
• 2008

Flexible CIGS thin film solar cell was fabricated using STS430 plate as a flexible substrate in this work. A diffusion barrier layer of $SiO_2$ thin film was deposited on STS430 substrate by PECVD followed by deposition of double layered Mo back contact. After depositing CIGS absorber layer by co-evaporation, CdS buffer layer by chemical bath deposition, ZnO window layer by RF sputtering and Al electrode by thermal evaporation, the solar cell fabrication processes were completed and its performance was evaluated. Corresponding solar cell showed an conversion efficiency of 8.35 % with $V_{OC}$ of 0.52 V, $J_{SC}$ of 26.06 mA/$cm^2$ and FF of 0.61.

• Journal of information and communication convergence engineering
• /
• 제5권4호
• /
• pp.320-323
• /
• 2007

This paper presents the resonance characteristics of the ZnO-based FBAR devices with multilayered Bragg reflectors with Cr adhesion layer inserted between $SiO_2$ and W layers. Due to the post- annealing, the return loss ($S_{11}$) and series/parallel quality factor are significantly improved when compared with the non-post annealing. This post-annealing method seems to be a very efficient way to improve the resonance characteristics of FBAR devices.

• 대한화학회지
• /
• 제13권1호
• /
• pp.16-24
• /
• 1969

Ni, Co, Zn, Cd, Mn, Mg, Ca, Sr, Ba 등의2가 금속과 U(VI) 및 V(IV)의 이온이 만드는 $MCup_2$ 조성의 cupferrates 착화합물에 관하여, 그 용해도가 좋은 dioxane-$H_2O$, methanol-$H_2O$, ethanol-$H_2O$ 및 2-propanol-$H_2O$의 혼합용매를 사용하여, 그들의 몰분율을 변화시키면서 제 1, 제 2 및 전체의 열역학적인 안정도상수를 전위차적정법에 의하여 측정하고, 안정도 상수와 유기용매의 몰분율에 관한 실험식을 얻었다. 한편 분광광전법에 의하여 가능한 cupferrates의 전체 안정도 상수를 측적하여 이들과 비교하였다. 2가 금속 cupferrates의 안정도상수는 위에 적은 금속의 순서로 감소하고, 이들의 log $K_1$은 log $K_2$보다 크지만, U(VI)과 V(IV)의 cupferrates는 log $K_1$$K_2$여서 1:1과 1:2 착화합물 사이에 구조 변화가 있는듯하다. 몰분율이 영인 점에서의 안정도상수는 금속 cupferrates의 수용액에서의 용해반응의 평형상수에 해당하며, 금속의 착화합물의 안정도상수와 용해도와는 무관하고, K<$10^5$인 cupferrates에 관해서는 분광전법을 적용하기 어렵다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.323-324
• /
• 2007

Investigation of improving the properties of UV photodetector which uses the wide bandgap of ZnO are under active progress. In this paper, transparent conducting aluminum-doped Zinc oxide films(AZO) were prepared by rf magnetron sputtering on glass(corning 1737) and p-Si substrate, were then annealed at temperature $400^{\circ}C$ for 2hr. The AZO thin films were deposited by RF sputtering system. HF power and work pressure is 120 W and 15 mTorr, respectively, and the purity of AZO target is 5N. The AZO thin films were deposited at 300, 400, $500^{\circ}C$, and $600^{\circ}C$. For sample deposited at $400^{\circ}C$, we observed best $V_r-I_{ph}$ of 0.94 mA and good transmittance.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.287.1-287.1
• /
• 2016

Three-dimensional (3-D) semiconductor nanoarchitectures, including nano- and micro- rods, pyramids, and disks, are emerging as one of the most promising elements for future optoelectronic devices. Since these 3-D semiconductor nanoarchitectures have many interesting unconventional properties, including the use of large light-emitting surface area and semipolar/nonpolar nano- or micro-facets, numerous studies reported on novel device applications of these 3-D nanoarchitectures. In particular, 3-D nanoarchitecture devices can have noticeably different current spreading characteristics compared with conventional thin film devices, due to their elaborate 3-D geometry. Utilizing this feature in a highly controlled manner, color-tunable light-emitting diodes (LEDs) were demonstrated by controlling the spatial distribution of current density over the multifaceted GaN LEDs. Meanwhile, for the fabrication of high brightness, single color emitting LEDs or laser diodes, uniform and high density of electrical current must be injected into the entire active layers of the nanoarchitecture devices. Here, we report on a new device structure to inject uniform and high density of electrical current through the 3-D semiconductor nanoarchitecture LEDs using metal core inside microtube LEDs. In this work, we report the fabrications and characteristics of metal-cored coaxial $GaN/In_xGa_{1-x}N$ microtube LEDs. For the fabrication of metal-cored microtube LEDs, $GaN/In_xGa_{1-x}N/ZnO$ coaxial microtube LED arrays grown on an n-GaN/c-Al2O3 substrate were lifted-off from the substrate by wet chemical etching of sacrificial ZnO microtubes and $SiO_2$ layer. The chemically lifted-off layer of LEDs were then stamped upside down on another supporting substrates. Subsequently, Ti/Au and indium tin oxide were deposited on the inner shells of microtubes, forming n-type electrodes of the metal-cored LEDs. The device characteristics were investigated measuring electroluminescence and current-voltage characteristic curves and analyzed by computational modeling of current spreading characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.5-5
• /
• 2009

Thin-film-transistors (TFTs) that can be prepared at low temperatures have attracted much attention because of the great potential for transparent and flexible electronics. One of the mainstreams in this field is the use of organic semiconductors such as pentacene. But device performance of the organic TFTs is still limited due to low field-effect mobility and rapid degradation after exposing to air. Alternative approach is the use of amorphous oxide semiconductors as a channel. Amorphous oxide semiconductors (AOSs) based TFTs showed the fast technological development, because AOS films can be fabricated at room temperature and exhibit the possibility in application like flexible display, electronic paper, and larges solar cells. Among the various AOSs, a-IGZO has lots of advantages because it has high channel mobility, uniform surface roughness and good transparency. [1] The high mobility is attributed to the overlap of spherical s-orbital of the heavy post-transition metal cations. This study demonstrated the effect of the variation in channel thickness from 30nm to 200nm on the TFT device performance. When the thickness was increased, turn-on voltage and subthreshold swing was decreased. The a-IGZO channels and source/drain metals were deposited with shadow mask. The a-IGZO channel layer was deposited on $SiO_2$/p-Si substrates by RF magnetron sputtering, where RF power is 150W. And working pressure is 3m Torr, at $O_2/Ar$ (2/28 sccm) atmosphere. The electrodes were formed with electron-beam evaporated Ti (30 nm) and Au (70 nm) bilayer. Finally, Al (150nm) as a gate metal was thermal-evaporated. TFT devices were heat-treated in a furnace at 250 $^{\circ}C$ and nitrogen atmosphere for 1hour. The electrical properties of the TFTs were measured using a probe-station. The TFT with channel thickness of 150nm exhibits a good subthreshold swing (SS) of 0.72 V/decade and on-off ratio of $1{\times}10^8$. The field effect mobility and threshold voltage were evaluated as 7.2 and 8 V, respectively.

• 한국방사선학회논문지
• /
• 제17권4호
• /
• pp.625-631
• /
• 2023

24시간/7일 동안 높은 관전압 하에서 높은 프레임 속도로 검사 대상체의 불량을 검사하는 산업용 동영상 엑스레이 디텍터의 중요한 요구사양은 높은 방사선 내구성을 확보하는 것이다. 본 연구는 비정질 실리콘 (a-Si), 다결정 실리콘 (Poly-Si), In-Ga-Zn-O 산화물 (IGZO) 등의 반도체 층을 갖는 다양한 박막트랜지스터를 제작하여 각각의 방사선 내구성을 확인하였다. a-Si TFT 대비 수십 배 높은 전계효과 이동도로 고속 동영상 구현이 가능한 IGZO TFT의 경우, IGZO 반도체 층과 층간절연막 사이에 수소화 처리를 진행할 경우 산업용 요구사양인 10,000 Gy 누선선량까지 엑스레이 영상센서로 적용 가능한 수준 이상으로 전기적 특성의 변화가 없음을 확인하였다. 따라서 수소화한 IGZO TFT는 방사선 내구성을 확보함과 동시에 높은 전계효과 이동도로 동영상 디텍터의 영상센서에 적용 가능한 유일한 소자임을 확인하였다.

• 자원환경지질
• /
• 제31권5호
• /
• pp.399-413
• /
• 1998

Daegang granite is located around the Namwon-gun, Cheolabuk-do, and is an elongate stock $(80 km^{2})$ in the NNE-SSW direction. Daegang granite has the very same mineralogical and geochemical characteristics as those of the typical A-type granites; (1) it is a one feldspar hypersolvus granite, and is classified as an alkali feldspar granite in the lUGS scheme, (2) has small amounts of Fe-rich biotite (annite) and alkali amphibole (ribeckite) that are late in the crystallization sequence of the granitic magma, (3) always contains opaque oxides, fluorite and zircon, (4) shows high and quite homogeneous $SiO_2$, content (mostly 72~77 wt.%) and $(Na_{2}O+K_{2}O)/Al_{2}O_{3}$ ratio (0.90~0.98), (5) contains high Ga, lOOOO*Ga/Ai, $K_{2}O+Na_{2}O$, $(K_{2}O+Na_{2}O)/CaO$, $K_{2}O/MgO$, FeO/MgO, agpaitic index, Zr, Nb, Ce, Y, Zn value or ratio that resemble to those of the Australian A-type granites (Whalen et al., 1987), and (6) has enriched LREE and HREE that show flat variation pattern with slightly depleted in HREE and profound Eu anomalies (Eu/Eu*=0.04~0.l4). In the tectonic discrimination diagrams of Pearce et al. (1984) and Eby (1992), Daegang granite is classified as a within plate granite and $A_{2}-type$.

• 자원환경지질
• /
• 제31권4호
• /
• pp.297-310
• /
• 1998

Geochemical characteristics of environmental toxic elements at the Narim mine area were investigated on the basis of major, minor, rare earth element geochemistry and mineralogy. Ratios of $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ in soils and sediments range from 11.57 to 22.21 and from 1.86 to 3.93, and are partly negative and positive correlation against $SiO_2/Al_2O_3$ (3.41 to 4.78), respectively. These suggested that sediment source of host granitic gneiss could be due to rocks of high grade metamorphism originated by sedimentary rocks. Characteristics of some trace and rare earth elements of V/Ni (0.33 to 1.95), Ni/Co (2.00 to 6.50), Zr/Hf (11.27 to 53.10), La/Ce (0.44 to 0.55), Th/Yb (4.07 to 7.14), La/Th (2.35 to 3.93), $La_N/Yb_N$ (6.58 to 13.67), Co/Th (0.63 to 2.68), La/Sc (3.29 to 5.94) and Sc/Th (0.49 to 1.00) are revealed a narrow range and homogeneous compositions may be explained by simple source lithology. Major elements in all samples are enriched $Al_2O_3$, MgO, $TiO_2$ and LOI, especially $Fe_2O_3$ (mean=7.36 wt.%) in sediments than the composition of host granitic gneiss. The average enrichment indices of major and rare earth elements from the mining drainage are 2.05 and 2.91 of the sediments and are 2.02 and 2.60 of the soils, normalizing by composition of host granitic gneiss, respectively. Average composition (ppm) of minor and/or environmental toxic elements in sediments and soils are Ag=14 and 1, As=199 and 14, Cd=22 and 1, Cu=215 and 42, Pb=1770 and 65, Sb=18 and 3, Zn=3333 and 170, respectively, and extremely high concentrations are found in the subsurface sediments near the ore dump. Environmental toxic elements were strongly enriched in all samples, especially As, Cd, Cu, Pb, Sb and Zn. The level of enrichment was very severe in mining drainage sediments, while it was not so great in the soils. Based on the EPA value, enrichment index of toxic elements is 8.63 of mining drainage sediments and 0.54 of soils on the mining drainage. Mineral composition of soils and sediments near the mining area were partly variable being composed of quartz, mica, feldspar, amphibole, chlorite and clay minerals. From the gravity separated mineralogy, soils and sediments are composed of some pyrite, arsenopyrite, chalcopyrite, sphalerite, galena, goethite and various hydroxide minerals.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.304-304
• /
• 2007

고주파 모률에서 사용되는 기판소재는 저유전율과 낮은 loss 특성을 요구함으로 지속적인 연구를 필요로 한다. 지금까지의 ceramic/glass composite 에서 주로 사용된 ceramic filler는 Al2O3로 낮은 유전률을 구현에 한계가 있었다. Cordierite는 낮은 유전율 (${\varepsilon}_r$ < 4)을 나타내는 filler로서 그 가능성이 높지만 아직까지 보고된 결과들이 미흡한 실정이다. 따라서 본 연구에서는 cordierite filler와 SiO2-B2O3-Al2O3-RO (R : Zn, Sr, Ba, Ca)계의 glass를 혼합하여 LTCC용 기판소재로서의 가능성을 확인하고자 저온 동시소성이 가능한 소결온도인 $850^{\circ}C{\sim}1.000^{\circ}C$ 사이에서 소재의 소결실험을 진행하였다. 소결온도에 따른 상변화, 유전특성을 확인한 결과 filler로 사용된 cordierite상만이 관찰 되었으며 소결조건에 따라 5.0~5.5의 낮은 유전율과 1.000~1,500의 Q를 나타내는 것을 확인 하였다.