• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1997.05a
• /
• pp.53-58
• /
• 1997

시설내 방적처리별 광환경, 개선 효과는 수적율이 환기나 송풍 단독으로 처리한 경우보다 2.6-5.8% 가량 낮은 2.7%를 보여 투광율이 송풍, 환기 단독 처리구보다 2.7-4.9% 가량 높아 67.4%를 보인 송풍+환기개선처리에서 가장 우수하였고 하우스 공간에서의 정식후 6일간 적산최저기온은 무처리에 비하여 4.6$^{\circ}C$가 낮았으나 작물이 정식된 터널에서는 0.8$^{\circ}C$ 정도 낮았다. 참외의 생육은 환경이 방적효과로 광환경이 우수한 송풍+환기개선처리에서 두 처리보다 엽수가 3-5매 가량 많고 착과율도 4-8% 정도 높아 전체적인 수량이 3,630kg/10a로 무처리에 비하여 43%나 증수되었다.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.387-390
• /
• 1988

The increases in the packing density and the resulting shrinkage of silicon integrated circuit dimensions led to the investigation and successful of the deposited silicide layers as the gate and interconnection and contact metallization. In this paper evaporated Co films on n-Si have been rapid thermal annealed in $N_2$ambient at temperature of $400^{\circ}C-1000^{\circ}C$. The Co silicide formation is characterized by sheet resistance (4PP). Also, silicide growth rate and its reproductivity has been examined by SEM.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.4
• /
• pp.568-573
• /
• 1996

The amorphous silicon films deposited by low pressure chemical vapor deposition are crystallized by the various annealing techniques including low-temperature furnace annealing and two-step annealing. Two-step annealing is the combination of furnace annealing at 600 [.deg. C] for 24 h and the sequential furnace annealing at 950 [.deg. C] 1h or the excimer laser annealing. It s found that two-step annealings reduce the in-grain defects significantly without changing the grain boundary structure. The performance of the poly-Si thin film transistors (TFTs) produced by employing the tow-step annealing has been improved significantly compared with those of one-step annealing. (author). 13 refs., 6 figs., 1 tab.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.461-461
• /
• 2010

For a low dielectric constant inter-metal dielectric application, the low-k SiCOH film with a dielectric constant of 2.8-3.2 has been deposited by plasma-enhanced chemical vapor deposition with decamethylcyclopentasiloxane, cyclohexane, and helium which is carrier gas. In this work, we investigated chemical deposition rate, dielectric constant, characterization of plasma polymer films according to temperature(25C-200C) of substrate and change of component concentration. We measured impedance by using V-I prove during process. From experimental result, deposition rate decrease with increasing temperature. Through real time impedance analysis of chamber, we find corelation between film thickness and impedance by assuming equivalent circuit.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.235-238
• /
• 1999

Silicon dioxide films were prepared by anodizing silicon wafers in an ethylene $glycol+HNO_3(0.04{\;}N)$ at 20 to $70^{\circ}C$. The voltage between silicon anode and platinum cathode was measured during this process. Under the constant current electrolysis, the voltage increased with oxide film growth. The transition time at which the voltage reached the predetermined value depended on the temperature of the electrolyte. After the time of electrolysis reached the transition time, the anodization was changed the constant voltage mode. The depth profile of oxide film/Si substrate was confirmed by XPS analysis to study the influence of the electrolyte temperature on the anodization. Usually, the oxide-silicon peaks disappear in the silicon substrate, however, this peak was not small at $45^{\circ}C$ in this region.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.6
• /
• pp.242-245
• /
• 2014

In order to increase the thickness uniformity in chemical vapor depositon of silicon carbide, we have carried out CFD studies for a CVD apparatus having a horizontally-rotated 3-stage susceptor. We deposited silicon carbide films of 3C-SiC phase showing quite uniform thickness between stages but not uniform one in the stage. The cause of this nonuniformity is thought to be originated from the high rotational speed. And the uniformity between stages can be further increased with the $120^{\circ}$ split type nozzles from CFD results. Through the formation of silicon carbide film on graphite substrates we can make oxidation-resistant and dust-free graphite components with high hardness for the semiconductor applications.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.237-240
• /
• 1991

In this paper, silicon oxynitride(SiON) films were chemically deposited by 193 nm Excimer laser irradiated parallel to the substrate. the laser pulse energy was 80 mJ, repetetion rate was 80 Hz and the laser average power was 6.4 watt, the gas ratio of $N_2O/NH_3$ was 0.75, the substrate temperature was $300^{\circ}C$, and the chamber pressure was 2 torr. And then, the interface state density($N_{ss}$) was characterized by DLTS(Deep Level Transient Spectroscopy). In addition, the capture cross section($\sigma$) and activation energy(${\Delta}E$) was also obtained. The resulting Nss values were $5.5{\times}10^{10}-3.2{\times}10^{11}(eV^{-1}cm^{-2})$, $\sigma$ was $6.64{\times}10^{-20}-2.114{\times}10^{-17}(cm^2)$, the ${\Delta}E$ of two peaks were $8.93{\times}10^{-2}$(eV), 0.375(eV).

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.291-297
• /
• 1996

The surface properties of AI(Si, Cu) alloy film after plasma etching using the chemistries of chlorinated and fluorinated gases with varying the etching time have been investigated using X-ray Photoelectron Spectroscopy. Impurities of C, Cl, F and O etc are observed on the etched AI(Si, Cu) films. After 95% etching, aluminum and silicon show metallic states and oxidized (partially chlorinated) states, copper shows Cu metallic states and Cu-Cl$_{x}$(x$_{x}$ (x$_{x}$ (1

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.12
• /
• pp.1283-1288
• /
• 2004

Metal-ferroelectric-insulator-semiconductor(WFIS) capacitors using rapid thermal annealed LiNbO$_3$/AlN/Si(100) structure were fabricated and demonstrated nonvolatile memory operations. The capacitors on highly doped Si wafer showed hysteresis behavior like a butterfly shape due to the ferroelectric nature of the LiNbO$_3$ films. The typical dielectric constant value of LiNbO$_3$ film in the MFIS device was about 27, The gate leakage current density of the MFIS capacitor was 10$^{-9}$ A/cm$^2$ order at the electric field of 500 kV/cm. The typical measured remnant polarization(2P$_{r}$) and coercive filed(Ec) values were about 1.2 $\mu$C/cm$^2$ and 120 kV/cm, respectively The ferroelectric capacitors showed no polarization degradation up to 10$^{11}$ switching cycles when subjected to symmetric bipolar voltage pulses of 1 MHz. The switching charges degraded only by 10 % of their initial values after 4 days at room temperature.e.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.995-998
• /
• 2003

This paper presents the deposition of poly-Si thin-film and fabrication of a solar cell by VHF-PECVD method. The poly-Si thin films. and pin-type solar cells are fabricated using multi-chamber cluster tool system. A 7.4% conversion efficiency was achieved from poly-Si thin film solar cells with total thickness less than $5{\mu}m$. The physical characteristic was measured by Raman spectroscopy, solar cell characteristic was measured under AM1.5 illumination.