• 한국세라믹학회지
• /
• 제35권5호
• /
• pp.472-478
• /
• 1998

Ferroelectric SrBi2Ta2O9(SBT) films were deposited on Pt/Ti/SiO2/Si substrates at 50$0^{\circ}C$ using a sintered SBT target Bi and Ta targets by modified rf magnetron sputtering and then were annealed at 80$0^{\circ}C$ for 10min in oxygen ambinet(760 torr) The composition of the SBT films could be easily controlled using the mul-ti-targets. The film composition of {{{{ {Sr }_{0.8 } {Bi }_{2.9 } {Ta}_{2.0 } {O }_{9 } }} was obtained with SBTd sputtering power of 100 W Bi of 25W and Ta of 10 W. A 250nm thick SBT films exhibited a dense and uniform microstructure and showed the remanent polarization(Pr) of 14.4 $\mu$C/cm2 and the coercive field({{{{ {E }_{c } }})of 60 kV/cm at applied voltage of 5 V. The SBT films show practically no polarization fatigue up to {{{{ {10 }_{10 } }} cycles under 5V bipolar pulse. The retention characteristics of the SBT films looked very promising and the leakage current density of the SBT films was about 1.23$\times${{{{ {10 }^{-7 } }}A/c{{{{ {m }^{2 } }} at 120kV/cm.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.104-111
• /
• 2001

$SiH_4$, $CH_4$, $B_2H_6$ 혼합기체를 이용하여 플라즈마 화학증착법으로 비정질 탄화실리콘(a-SiC:H) 박막을 증착하였다. 기상 doping 농도를 0에서 $2.5\times10^{-2}$ 범위에서 변화시켜 얻은 박막의 물성을 SEM, XRD, Raman 분광법, FTIR, SIMS, 광흡수도와 전기전도도 분석을 통하여 살펴보았다. $B_2H_6$/($CH_4+SiH_4$) 기체유량비가 증가할수록 붕소의 도핑효율와 미세결정성은 감소하였다. 증착 중 $B_2H_6$ 기체가 첨가됨에 따라 비정질 탄화실리콘 박막의 Si-C-H 결합기의 강도는 감소하였으며, 이의 영향으로 박막내의 수소함량은 $B_2H_6/(SiH_4+CH_4$) 기체 유량비가 증가함에 따라 16.5%에서 7.5%로 단조감소하였다. $B_2H_6(CH_4+SiH_4$) 기체유량비가 증가할수록 a-SiC:H 박막의 광학적 밴드갭과 전기활성화 에너지는 감소하였고, 전기전도도는 증가하였다.

• 한국전기전자재료학회논문지
• /
• 제13권10호
• /
• pp.828-833
• /
• 2000

Growth characteristics and microstructure of AIN thin films grown by plasma assisted molecular beam epitaxy on Si substrates have been investigated. Growing temperature and substrate orientation were chosen as major variables of the experiment. Reflection high energy electron diffraction (RHEED), X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy/diffraction (TEM/TED) techniques were employed to characterize the micorstructure of the films. On Si(100) substrates, AlN thin films were grown along the hexagonal c-axis preferred orientation at temperature range 850-90$0^{\circ}C$. However on Si(111), the AlN films were epitaxially grown with directional coherency in AlN(0001)/Si(111), AlN(1100)/Si(110), and AlN(1120)/Si(112) at 85$0^{\circ}C$ and the epitaxial coherencry seemed to be slightly distorted with increasing temperature. The microstructure of AlN thin films on Si(111) substrates showed that the films include a lot of crystal defects and there exist micro-gaps among the columns.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.111-114
• /
• 2000

Growth characteristics and microstructure of AlN thin films grown by plasma assisted molecular beam epitaxy on Si substrates have been investigated. Growing temperature and substrate orientation were chosen as major variables of the experiment. Reflection high energy electron diffraction (RHEED), X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy/diffraction (TEM/TED) techniques were employed to characterize the microstructure of the films. On Si(100) substrates, AlN thin films were grown along the hexagonal c-axis preferred orientation at temperature range 850-90$0^{\circ}C$. However on Si(111), the AlN films were epitaxially grown with directional coherency in AlN(0001)/Si(111), AlN(1100)/Si(110), and AlN(1120)/Si(112) at 85$0^{\circ}C$ and the epitaxial coherencry seemed to be slightly distorted with increasing temperature. The microstructure of AlN thin films on Si(111) substrates showed that the films include a lot of crystal defects and there exist micro-gaps among the columns.

• 한국표면공학회지
• /
• 제28권3호
• /
• pp.133-141
• /
• 1995

The deposition characteristics of diamond films were investigated for three different substrates : Si, Inconel 600 and steel. Diamond films were prepared by microwave plasma CVD method using $CH_4$, $H_2$ and $O_2$ as reaction gases. The deposited films were analyzed with SEM, Raman spectroscopy and ellipsometer. For Si substrate, diamond films were successfully obtained for most of the deposition conditions used in this study. As the $CH_4$ flow rate decreased and the $O_2$ flow rate increased, the quality of the film was improved due to the reduced non-diamond phase in the film. For Inconel 600 substrate, the surface pretreatment with diamond powders was required to deposit a continuous diamond film. The films deposited at temperatures of $600^{\circ}C$ and $700^{\circ}C$ had mainly diamond phase, but they were peeled off locally due to the difference in the thermal expansion coefficient between the substrate and the deposited films. The films deposited at $500^{\circ}C$ and $850^{\circ}C$ had only the graphitic carbon phase. For steel substrate, all of the films deposited had only the graphitie carbon phase. We speculated that the formation of diamond nuclei on the steel substrate was inhibited due to the diffusion of carbon atoms into the steel substrate which has a large amount of carbon solubility.

• 한국전기전자재료학회논문지
• /
• 제20권7호
• /
• pp.606-610
• /
• 2007

This paper describes the Raman scattering characteristics of polycrystalline (poly) 3C-SiC thin films, in which they were deposited on the oxidized Si substrate by APCVD method according to growth temperature. Since the phonon modes were not measured for $0.4{\mu}m$ thick 3C-SiC, $2.0{\mu}m$ thick 3C-SiC deposited on the oxidized Si at $1180^{\circ}C$, in which TO (transverse optical mode) and LO (longitudinal optical mode) phonon modes were appeared at 794.4 and $965.7cm^{-1}$, respectively. The broad FWHM (full width half maximum) can explain that the crystallinity of 3C-SiC deposited at $1180^{\circ}C$ becomes polycrystalline instead of disorder crystal. Additionally, the ratio of intensity $I_{LO}/I_{TO}{\approx}1.0$ of 3C-SiC indicates that the crystal disorder of $3C-SiC/SiO_2/Si$ is small. Compared poly $3C-SiC/SiO_2$ with $SiO_2/Si$ interfaces, $1122.6cm^{-1}$ phonon mode was measured which may belong to C-O bonding and two phonon modes, 1355.8 and $1596.8cm^{-1}$ related to D and G bands of C-C bonding in the Raman range of 200 to $2000cm^{-1}$.

• 한국진공학회지
• /
• 제5권2호
• /
• pp.133-138
• /
• 1996

단일 선구물질인 1, 3 -디실라부탄을 사용하여 고진공 하의 온도 영역 900-$1000^{\circ}C$에서 탄화규소 환충층이 형성된 Si(001) 기질 위에 입방형 탄화규소 박막을 적층 성장시켰다. 얻어진 탄화규소 박막의 화학량론적 비, 양질의 결정성 및 표면형태의 특성을 반사 고에너지 전자 회절, Xtjs 광전자 분광법, X선 회절, Xtjs 극접도, 주사 전자 현미경 및 투과 전자 현미경으로 확인하였다. 이들 결과로부터 단일 선구물질인 1, 3-디실라부탄이 입방구조를 가지는 탄화규소 박막의 적층 성장에 적절한 물질임을 밝혔다.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.647-651
• /
• 2016

SiC films were prepared on glassy carbon substrates by laser chemical vapor deposition under a high pressure of $10^4Pa$ using a diode laser (wavelength = 808 nm) and a polysilaethylene precursor. (111)-oriented SiC films were formed at a deposition temperature ($T_{dep}$) range of 1150 - 1422 K. At $T_{dep}=1262K$, the SiC film with a high Lotgering factor of above 0.96 showed an exhibited pyramid-like surface morphology and flower-like grains. The highest deposition rate ($R_{dep}$) was $220{\mu}m\;h^{-1}$ at $T_{dep}=1262K$.

• 한국재료학회지
• /
• 제10권11호
• /
• pp.749-764
• /
• 2000

약 90 nm 두께의 비정질 TaSiN박막을 poly-Si and $SiO_2/Si$ 기판 위에 rf magnetron sputtering법으로 증착하였다. TaSiN박막은 산소부위기에서 열처리 시 $ 900^{\circ}C$까지 결정화되지 않는 비정질 상을 보였다. 산소의 확산 깊이는 산소분위기 열처리 온도가 증가함에 따라 증가하였으며 $650^{\circ}C$, 30분 열처리시 $Ta_{23}Si_{29}N_{48}$의 경우 약 20 nm의 깊이까지 확산되었다. $Ta_{23}Si_{29}N_{48}$ 박막의 증착 후 비저항은 약 $1,300{\mu}{\Omega}-cm$의 값을 보였지만 산소분위기 열처리시 $700^{\circ}C$ 이상에서 급격히 증가하였다.

• 한국진공학회지
• /
• 제5권4호
• /
• pp.359-364
• /
• 1996

Pt/Ti/$SiO_2$/Si 기판 위에 r.f. 마그네트론 스퍼터링 방법으로 $300^{\circ}C$이하의 저온에서 SrTiO3 박막을 증착하였다. XRD, RBS, TEM, EPMA로 증착된 박막의 재료적 특성을 분석하였고, Al/$SrTiO_3$/Pt의 구조로 커패시터를 제작하여 전기적 특성을 분석하였다. 기판온도가 증가함에 따라 박막의 결정성과 유전율이 향상되었으나, $200^{\circ}C$이하의 기판온도에서는 Sr이 결핍된 조성을 갖게 되어 증착된 박막이 반도성을 나타내었다. 증착중에 기판에 양의 d.c. 전압을 10~30V 인가함으로써 박막의 결정성이 크게 향상되었고, 유전특성도 개선되었다. $300^{\circ}C$의 기판온도에서 20V의 d.c. bias를 인가하여 증착한 400nm 두께의 $SrTiO_3$ 박막은 <211> 우선방향성을 갖는 주상정 구조와 화학양론적인 조성을 나타내었고, 본 연구에서 가장 우수한 전기적 특성을 보였다. 100 kHz에서 유전율이 98, 유전손실이 3.4%였으며, 3V에서 누설전류는 $10^{-5}A/\textrm{cm}^2$였다.