• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.14-19
• /
• 2013

The size and distribution of residual stresses and the effect of the minimum mesh size were investigated by the a-Si thin film solar cell. Attributed to the difference in coefficient of thermal expansion of the a-Si and Ag concentrated residual stresses at the joint interface of dissimilar materials. The ${\sigma}y$ and ${\tau}xy$ didn't appear in the central part, but ${\sigma}x$ existed. However, ${\sigma}x$, ${\sigma}y$ and ${\tau}xy$ appeared in the edge part and concentrated residual stresses at the interface between a-Si and Ag. Minimum mesh size gets smaller, the concentration of ${\sigma}y$ was significantly and existence area was reduced. As a result, the failure of thin film solar cells during the cutting process can be explained by the residual stresses.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.995-998
• /
• 2003

This paper presents the deposition of poly-Si thin-film and fabrication of a solar cell by VHF-PECVD method. The poly-Si thin films. and pin-type solar cells are fabricated using multi-chamber cluster tool system. A 7.4% conversion efficiency was achieved from poly-Si thin film solar cells with total thickness less than $5{\mu}m$. The physical characteristic was measured by Raman spectroscopy, solar cell characteristic was measured under AM1.5 illumination.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.257.2-257.2
• /
• 2015

In this paper, we report on the 10.33% efficient thin film/bulk tandem solar cells with the top cell made of amorphous silicon thin film and p-type bulk crystalline silicon bottom cell. The tunneling junction layers were used the doped nanocrystalline Si layers. It has to allow an ohmic and low resistive connection. For player and n-layer, crystalline volume fraction is ~86%, ~88% and dark conductivity is $3.28{\times}10-2S/cm$, $3.03{\times}10-1S/cm$, respectively. Optimization of the tunneling junction results in fill factor of 66.16 % and open circuit voltage of 1.39 V. The open circuit voltage was closed to the sum of those of the sub-cells. This tandem structure could enable the effective development of a new concept of high-efficiency and low cost cells.

• 한국진공학회지
• /
• 제19권4호
• /
• pp.314-318
• /
• 2010

다결정 실리콘 웨이퍼 표면에 대면적 reactive ion etching (RIE) 장비로 표면 텍스쳐를 형성한 뒤 태양전지를 제작하였다. 웨이퍼 표면에 텍스쳐를 형성하는 것은 광학적 손실을 줄이기 위해 일반적으로 사용되는 방법으로 alkaline etching이 사용된다. 그러나 다결정 실리콘 태양전지의 경우 재료의 결정 방향에 따라 식각되는 alkaline etching은 텍스쳐링의 모양을 제어할 수 없어 효과적이지 못하다. 이와 달리 플라즈마 식각방법을 사용하면 표면 텍스쳐의 모양을 효과적으로 제어하여 조금 더 낮은 반사율을 얻을 수 있다. 하지만 텍스쳐 모양 조절로 얻은 낮은 반사율이 항상 높은 변환효율을 얻을 수 있는 것은 아니다. 본 연구에서는 대면적 RIE 공정 조건별로 얻은 태양전지 표면 텍스쳐의 모양에 따라 각각의 반사율과 양자효율 및 변환효율이 미치는 영향을 살펴보았다.

• 신재생에너지
• /
• 제2권3호
• /
• pp.31-36
• /
• 2006

Superstrate pin amorphous silicon thin-film(a-Si:H) solar cells are prepared on $SnO_2:F$ and ZnO:Al transparent conducting oxides(TCO) in order to see the effect of TCO/p-layers on a-Si:H solar cell operation. The solar cells prepared on textured ZnO:Al have higher open circuit voltage VOC than cells prepared on $SnO_2:F$. Presence of thin microcrystalline p-type silicon layer(${\mu}c-Si:H$) between ZnO:Al and p a-SiC:H plays a major role by causing improvement in fill factor as well as $V_{OC}$ of a-Si:H solar cells prepared on ZnO:Al TCO. Without any treatment of pi interface, we could obtain high $V_{OC}$ of 994mV while keeping fill factor(72.7%) and short circuit current density $J_{SC}$ at the same level as for the cells on $SnO_2:F$ TCO. This high $V_{OC}$ value can be attributed to modification in the current transport in this region due to creation of a potential barrier.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.158-161
• /
• 2006

Superstrate pin amorphous silicon thin-film (a-Si:H) solar cells are prepared on $SnO_2:F$ and ZnO:Al transparent conducting oxides (TCO) In order to see the effect of TCO/P-layers on a-Si:H solar cell operation. The solar cells prepared on textured ZnO:Al have higher open circuit voltage $V_{oc}$ than cells prepared on $SnO_2:F$. Presence of thin microcrystalline p-type silicon layer $({\mu}c-Si:H)$ between ZnO:Al and p a-SiC:H plays a major role by causing improvement in fill factor as well as $V_{oc}$, of a-Si:H solar cells prepared on ZnO:Al TCO. Without any treatment of pi interface, we could obtain high $V_{oc}$, of 994mv while keeping fill factor (72.7%) and short circuit current density $J_{sc}$ at the same level as for the cells on $SnO_2:F$ TCO. This high $V_{oc}$ value can be attributed to modification in the current transport in this region due to creation of a potential barrier.

• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2909-2912
• /
• 2010

Hydrogenated microcrystalline silicon (${\mu}c$-Si:H) thin film for solar cells is prepared by plasma-enhanced chemical vapor deposition and physical properties of the ${\mu}c$-Si:H p-layer has been investigated. With respect to stable efficiency, this film is expected to surpass the performance of conventional amorphous silicon based solar cells and very soon be a close competitor to other thin film photovoltaic materials. Silicon in various structural forms has a direct effect on the efficiency of solar cell devices with different electron mobility and photon conversion. A Raman microscope is adopted to study the degree of crystallinity of Si film by analyzing the integrated intensity peaks at 480, 510 and $520\;cm^{-1}$, which corresponds to the amorphous phase (a-Si:H), microcrystalline (${\mu}c$-Si:H) and large crystals (c-Si), respectively. The crystal volume fraction is calculated from the ratio of the crystalline and the amorphous phase. The results are compared with high-resolution transmission electron microscopy (HR-TEM) for the determination of crystallinity factor. Optical properties such as refractive index, extinction coefficient, and band gap are studied with reflectance spectra.

• 한국진공학회지
• /
• 제21권1호
• /
• pp.55-61
• /
• 2012

본 연구에서는 주기적인 3차원 패턴이 형성된 유리기판을 사용하여 비정질 실리콘 박막 태양전지를 제작하였다. 주기적인 패턴은 일반적인 전도성 투명 산화막(TCO: Trasparent Conductive Oxide) 표면의 불규칙 패턴과 비교하여 더 효율적인 광포획을 가능하게 한다. 태양전지 제작 전 광특성 전산모사를 통하여 주기적인 패턴 유리 기판의 광학적 특성을 알아보았다. 비정질 실리콘 박막 태양전지의 제작은 PECVD를 이용하여 구면 패턴이 형성된 유리기판을 이용하여 제작되었으며, 인공 태양광 조사장치를 이용하여 제작된 태양전지의 성능 평가를 진행하였다. 태양전지 전산모사 결과와 실험 결과들을 비교 분석하여 주기적인 패턴 유리 기판을 이용한 비정질 실리콘 박막 태양전지의 효율향상 가능성을 확인하였다.

• 정보저장시스템학회논문집
• /
• 제9권2호
• /
• pp.67-71
• /
• 2013

The fabrication method of plasmonic nanodots on silicon substrate has been developed to improve the efficiency of thin film solar cells. Nanoscale metallic nanodots arrays are fabricated by anodic aluminum oxide (AAO) template mask which can have different structural parameters by varying anodization conditions. In this paper, the structural parameters of gold nanodots, which can be controlled by the diverse structures of AAO template mask, are investigated to enhance the optical properties of a-Si thin film solar cells. It is found that optical properties of the thin film solar cells are improved by finding optimization values of the structural parameters of the gold nanodot array.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1595-1597
• /
• 2003

This paper presents the deposition of ${\mu}c$-Si:H thin-film and fabrication of a solar cell by VHF-PECVD method. The ${\mu}c$-Si:H thin films and pin-type solar cells are fabricated using multi-chamber cluster tool system. A 7.4% conversion efficiency was achieved from ${\mu}c$-Si:H thin film solar cells with total thickness less than $5{\mu}m$. The physical characteristic was measured by Raman spectroscopy, Solar cell characteristic was measured under AM1.5 illumination.