• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.422-448
• /
• 1996

Low-temperature epitaxial growth of Si and SiGe layers of Si is one of the important processes for the fabrication of the high-speed Si-based heterostructure devices such as heterojunction bipolar transistors. Low-temperature growth ensures the abrupt compositional and doping concentration profiles for future novel devices. Especially in SiGe epitaxy, low-temperature growth is a prerequisite for two-dimensional growth mode for the growth of thin, uniform layers. UHV-ECRCVD is a new growth technique for Si and SiGe epilayers and it is possible to grow epilayers at even lower temperatures than conventional CVD's. SiH and GeH and dopant gases are dissociated by an ECR plasma in an ultrahigh vacuum growth chamber. In situ hydrogen plasma cleaning of the Si native oxide before the epitaxial growth is successfully developed in UHV-ECRCVD. Structural quality of the epilayers are examined by reflection high energy electron diffraction, transmission electron microscopy, Nomarski microscope and atomic force microscope. Device-quality Si and SiGe epilayers are successfully grown at temperatures lower than 600℃ after proper optimization of process parameters such as temperature, total pressure, partial pressures of input gases, plasma power, and substrate dc bias. Dopant incorporation and activation for B in Si and SiGe are studied by secondary ion mass spectrometry and spreading resistance profilometry. Silicon p-n homojunction diodes are fabricated from in situ doped Si layers. I-V characteristics of the diodes shows that the ideality factor is 1.2, implying that the low-temperature silicon epilayers grown by UHV-ECRCVD is truly of device-quality.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.28-30
• /
• 2009

이종접합태양전지에서 p a-Si:H/c-Si의 p a-Si:H의 증착 조건인 $H_2/SiH_4$ 비율, $B_2H_6$의 농도를 변화 시키며 실험하여 이 따라 계면 특성 변화를 연구하였다. pa-Si:H의 $H_2/SiH_4$ 비율이 상승할수록 carrier lifetime이 증가하다 다시 감소하는 경향을 나타내었다. 이는 $H_2/SiH_4$의 비율 중 효과적으로 웨이퍼표면을 효과적으로 passivation하는 지점이 있는 것으로 보인다. $B_2H_6$의 농도는 상승할수록 carrier lifetime이 줄어드는 경향을 보였다. $B_2H_6$에서 농도가 올라감에 웨이퍼 표면의 defect로 작용했을 것으로 생각된다. 이에서 몇몇의 조건으로 태양전지를 제작한 결과 $H_2/SiH_4$ 비율에 따라서는 carrier lifetime은 효율에 그 영향이 미미한 것으로 조사되었고, $B_2H_6$의 농도가 낮을수록 개방전압은 상승하는 결과를 얻어 도핑 농도가 효율에 직접적인 형향을 주는 것으로 나타났다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.916-923
• /
• 2004

In this paper, the strained Si$_{0.9}$Ge$_{0.1}$ epitaxial layers grown by a reduced pressure chemical vapor deposition (RPCVD) on Si (100) were characterized by Rutherford backscattering spectrometery (RBS) for the fabrication of an SiGe heterojunction bipolar transistor(HBT). RBS spectra of the ${Si}_0.9{Ge}_0.1$epitaxial layers grown on the Si substrates which were implanted with the phosphorus (P) ion and annealed at a temperature between $850^{\circ}C$ - $1000^{\circ}C$ for 30min were analyzed to investigate the post thermal annealing effect on the grown${Si}_0.9{Ge}_0.1$epitaxial layer quality. Although a damage of the substrates by P ion-implantation might be cause of the increase of RBS yield ratios, but any defects such as dislocation or stacking fault in the grown ${Si}_0.9{Ge}_0.1$ epitaxial layer were not found in transmission electron microscope (TEM) photographs. The post high temperature rapid thermal annealing (RTA) effects on the crystalline quality of the ${Si}_0.9{Ge}_0.1$ epitaxial layers were also analyzed by RBS. The changes in the RBS yield ratios were negligible for RTA a temperature between $900^{\circ}C$ - $1000^{\circ}C$for 20 sec, or $950^{\circ}C$for 20 sec - 60 sec. A SiGe HBT array shows a good Gummel characteristics with post RTA at $950^{\circ}C$ for 20 sec.sec.sec.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.113-116
• /
• 2005

In this paper, silicon thin-film solar cells(Si- TFSC) and a-Si/c-Si heterojunction solar cells(HJ-cell) are investigated. The Si-TFSC was prepared on glass substrate by depositing $1-3{\mu}m$ thin-film silicons by glow discharge method. The $a-Si:H/{\mu}c-Si:H$ tandem solar cells on textured ZnO:A1 TCO (transparent conducting oxide) showed improved Jsc in top and bottom cells than that on $SnO_2:F$ TCO. This enhancement of jsc resulted from improved light trapping effect by front textured ZnO:A1. The a-Si/c-Si HJ-cells with simple structure without high efficiency features are suffering from low Voc and Jsc. The improvement of front nip and back interface properties by adopting high quality silicon-films at low temperature should be done both for increasing device performances and production cost.

• Solar Energy
• /
• v.11 no.1
• /
• pp.41-49
• /
• 1991

In this study, the (P)SiC/(N)Si solar cell is fabricated by the vacuum evaporation method with the substrate temperature at about $200{\pm}5[5^{\circ}C]$ and its characteristics are investigated. The optimal thickness of $1.2[{\mu}m]$ of SiC film is derived from the relation between film thickness and conversion efficiency. The characteristics of solar cells are improved by the annealing. The optimum annealing temperature and duration are $420[^{\circ}C]$ and 12[min], respectively it is shown that the peak values of spectral response are shifted to the long wavelength region with increasing the annealing temperature. The X-ray diffraction patterns and the scanning electron micrographs show the grain grow thin SiC film as the annealing temperature and time is increased. The best conversion efficiency is 11.7[%] for a $2.5{\times}1[cm^2]$ cell.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.1
• /
• pp.14-18
• /
• 2007

The electric property in the $GaAs-Al_{x}Ga_{1-x}$ quantum well with the Si ${\delta}-doping$ layer in a non-central position is studied through the effect of the electric field intensity on the electron distribution. The finite difference method is used for the calculation of the subband energy level and its wavefunction. In order to account for the change of the potential energy due to the charged particles, the self consistent method is employed. As the Si ${\delta}-doping$ layer becomes closer to the heterojunction interface, the electrons less affected by Coulomb scattering are greatly increased under the external electric field. Therefore, the high speed device is suggested due to the fact that the high mobility electrons can be increased by positioning the ${\delta}-doping$ layer in the quantum well and by applying the electric field intensity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.211.2-211.2
• /
• 2013

ITO (indium tin oxide)는 스마트폰을 비롯한 여러전자제품의 터치패널 투명전극으로 가장 많이 쓰이고 있는 물질이다. 산화 인듐(In2O3)과 산화 주석(SnO2)의 화합물로 우수한 전기적 특성과 광학적 특성을 지녀 태양전지 분야에서도 그 활용가능성이 높다. 또한 최근 고효율 태양전지인 HIT (heterojunction with intrinsic thin layer) solar cell의 경우 Si 기판의 두께가 얇고, 소자의 양면에서 태양광을 흡수하여 효율을 증가 시키데, 특히 투명 전극의 물리적 특성들과 계면의 트랩의 상태가 효율에 영향을 미친다. 본 연구에서는 HIT Si 기판의 태양전지 구조에 전극으로 쓰일 ITO 박막을 sputtering 방법으로 증착하여 물리적 특성을 연구하였다. ITO 타겟을 활용한 radio frequency magnetron sputtering 방법으로 Si 기판에 ITO 박막을 증착하였다. 50W의 방전전력과 Ar 10 sccm 분위기에서 성장시킨 ITO 박막을 Transmission Electron Microscope 로 측정하였다. X-ray Diffraction 측정으로 ITO 결정의 방향성을 확인하고 Photoluminescence 측정으로 성장된 ITO 박막의 밴드갭 에너지를 확인하였다. $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$에서 후열처리한박막의 광 투과율, 비저항, 이동도를 측정 비교하여 적절한 후열처리 온도를 찾는 연구를 진행하였다. Sputtering 방법으로 성장시킨 ITO 박막의 전기적, 광학적 특성을 측정하여 HIT solar cell에 활용될 가능성을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.58.2-58.2
• /
• 2010

본 연구에서는 n-type wafer에 비정질 실리콘을 증착한 이종접합 태양전지를 열처리 방법을 이용하여 열처리의 효과를 분석함으로써 이종접합 태양전지에 효율적인 열처리 효과에 대하여 연구하였다. P, N-layer는 PECVD(Plasma-enhanced chemical vapor deposition) I-layer는 HWCVD(Hot wire chemical vapor deposition), ITO는 RF 마그네트론 스퍼터링법으로 동일한 조건에서 제작하였고 rapid thermal process를 이용하여 진공 중에서 $150^{\circ}C$, $200^{\circ}C$, $220^{\circ}C$, $250^{\circ}C$까지 열처리를 하였다. 열처리 전과 후 QSSPC로 minority carrier life time, 자외 가시선 분광분석 장치로 투과 반사도를, Ellipsometer로 흡수 계수 등의 변화를 조사하였다. 열처리 후 Minority carrier life time, Voc 및 광변환 효율이 증가하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.3
• /
• pp.268-272
• /
• 2007

A fully integrable InP/InGaAs HPT with an ITO emitter contact was first fabricated by employing a $SiO_2$ passivation layer. The electrical and the optical characteristics of the HPT with a passivation layer were measured and compared with those of the HPT without a passivation layer. The only noticeable difference was the increased emitter series resistance of the HPT with a passivation layer. AES analysis was performed to explain the reason of the increased emitter series resistance. Results show that PECVD $SiO_2$ deposition and annealing processes cause the diffusion of oxygen to the interface and the depletion of tin at the interface, which may be responsible for the increase of the series resistance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.600-600
• /
• 2012

실리콘 이종접합 태양전지는 diffused dopant를 이용하여 high conductivity의 emitter를 가지는 기존의 crystalline silicon 태양전지와는 다르게 a-Si:H를 이용한 low conductivity emitter 때문에 TCO를 front electrode 및 anti-reflection layer로 사용한다. 하지만 TCO와 emitter사이의 work function mismatch에 의한 band-offset이 발생하고 photo-generation된 carrier의 injection을 막아 효율 상승을 제한하게 된다. 본 연구는 산소 반응성 스퍼터링을 통한 front TCO의 일함수 변경과 이에 따른 TCO와 emitter 계면에 존재하는 band-offset 변화에 대하여 분석하였다. 특히 산소 분압에 따른 front TCO의 일함수 변화에 따라 개방전압 및 단락전류 변화가 두드러지게 나타났으며, 직렬저항 성분 변화에 따른 충진률 변화에 따른 효율상승을 얻을 수 있었다.