• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.8-11
• /
• 2012

Purpose : Among quality control items, the radiochemical impurity must be below 10% of total radioactivity. In this regard, as the recently commercialized automatic synthesis module produces a large amount of 18F-FDG, radiolysis of radiopharmaceuticals is very likely to occur. Thus, this study compared the changes in radiochemical purity regarding radiolysis of $^{18}F$-FDG according to automatic synthesis module. Materials and methods : Cyclotron (PETtrace, GE Healthcare) was used to produce $^{18}F$ and automatic synthesis module (FASTlab, Tracerlab MX, GE Healthcare) was used to achieve synthesis into FDG. For radiochemical purity, Radio-TLC Scanner (AR 2000, Bioscan), GC (Gas Chromatograph, Agilent 7890A) was used to measure the content of ethanol included in $^{18}F$-FDG. Glass board applied with silica gel ($1{\times}10cm$) was used for stationary phase while a mixed liquid formed of acetonitrile and water (ratio 19:1) was used for mobile phase. High-concentration and low-concentration $^{18}F$-FDG were produced in each synthesis module and the radiochemical purity was measured every 2 hours. Results : The purity in low-concentration (below 2.59 GBq/mL) was measured as 99.26%, 98.69%, 98.25%, 98.09% in Tracerlab MX and as 99.09%, 97.83%, 96.89%, 96.62% in FASTlab according to 0, 2, 4, 6 hours changes, respectively. The purity in high-concentration (above 3.7 GBq/mL) was measured as 99.54%, 96.08%, 93.77%, 92.54% in Tracerlab MX and as 99.53%, 95.65%, 92.39%, 89.82% in FASTlab according to 0, 2, 4, 6 hours changes, respectively. Also, ethanol was not detected in GC of $^{18}F$-FDG produced in FASTlab, while 100~300 ppm ethanol was detected in Tracerlab MX. Conclusion : Whereas the change of radiochemical purity was only 3% in low-concentration $^{18}F$-FDG, the change was rapidly increased to 10% in high-concentration. Also, higher radiolysis were observed in $^{18}F$-FDG produced in FASTlab than Tracerlab MX. This is because ethanol is included in the synthesis stage of Tracerlab MX but not in the synthesis stage of FASTlab. Thus, radiolysis is influenced by radioactivity concentration than the inclusion of ethanol, which is the radioprotector. Therefore, after producing high-concentration $^{18}F$-FDG, the content must be diluted through saline to lower concentration.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.590-595
• /
• 2010

This study was conducted to investigate form of pollution brought by residual of mine tailing in agricultural land, and get basic information need for environment restoration. Guundong mine was completely restored region by implementation the soil pollution prevention plan. The districts is soils in Guundong mine vicinity the Mahul-ri, Muan-myeon, Miryang city, Gyeongsangnam-do. The nature of soil studied is the Shinra series andesite and mineral deposits which contain brimstone and heavy metals such as gold, silver, copper, lead, and zinc. The residual mine tailing and around agricultural land of heavy metals analyzed with 0.1N HCI solubility. The chemical properties of surface soil in upper part around mining area were pH 4.3-4.4, organic matter 19-21 g $kg^{-1}$, available $P_2O_5$ 85 mg $kg^{-1}$, exchangeable Ca 0.21-0.25 $cmol_c\;kg^{-1}$, exchangeable Mg 0.04 $cmol_c\;kg^{-1}$. The pH, exchangeable Ca, and Mg were increased with soil depth. The contents of 0.1N HCl extractable Cu, Cd, Pb, Cr, and Ni in soil (siteI) which influenced by outflow water from mine tailing were 97, 0.6, 197, 0.28 및 0.12 mg $kg^{-1}$, respectively. The vertical distribution of heavy metals in soil varied considerably among the metals kind. In case of siteI, The content of Cu, Pb, and Cr in soil was highest at surface soil. However, the content of Cd, Zn, Ni, and Mn was high at middle part of soil profile.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.5
• /
• pp.59-66
• /
• 2020

Recently, cultivation and management technologies have been needed to adapt due to climate change, which is causing abnormal weather conditions. One technique is to increase the utilization of evergreen broad-leaved species with high ornamental value. A total of five treatments were installed (1m×22.5m), including 60g/㎡ and 80g/㎡ using two types mulching material with an overlapping and hole-drilling mulching method and these were compared to un-mulching treatment a total of planted 92㎡ attheWol-aTestSiteForestattheForestforBiomaterialsResearchCenterinJinju-si, Gyeongsangnam-dofor 10monthsusing3-years-oldQuercusglaucaThunb. In comparison with the control site, the 60g/㎡ overlapping method was about 1.9 times higher than the root collar diameter, but there was no statistical significance between the treatments. Healthy seedlings were found to meet these conditions due to high biomass values and below and T/R ratios of 3.0 or lower and H/D ratios of 7.0 or lower. Comparing the values of LWR, SWR, and RWR, which can be evaluated for seedling due to the mulching treatments, as compared to the control, the growth of the ground areas including leaves and stems was enhanced, but the growth of the underground areas containing roots tended to have high control values. Based on this, the SQI value, which can be evaluated for the comprehensive quality of seedlings, was found to be significantly different between the control site and the mulching treatment sites, confirming that the growth and growth improvement effects were achieved with mulching treatments. The chlorophyll content analysis showed that there was a significant difference from the control site, and it was judged that weed generation in the control acted as an environmental stress, causing a decrease in chlorophyll content. It was found that the overlapping 80g/㎡ of polypropylene mulching material generated about 4 times fewer weeds than the control, and the manpower required for the mulching test field and weeding were equal at 3.3 people/100㎡/1 day. Mulching treatments have demonstrated a significant difference in the promotion of growth and quality of the seedlings and are judged as an alternative that can reduce the economic burden incurred by the purchase of the supplies and the manpower required to weed forestry plantations.

• Korean Journal of Soil Science and Fertilizer
• /
• v.23 no.4
• /
• pp.259-267
• /
• 1990

This study was carried out by investigating the changes of physico-chemical and mechanical properties of Gwanghwal and Poseung series in order to obtain basic information on the soil improvement and management. 1. In Gwanghwal series, the content of salt in soil and ground water before rice transplanting at the 21st year after reclamation were 0.29 and 1.02 percent respectively, and the safty cultivation of paddy rice was possible after 33 years of reclamation in both soil series. 2. Clay contents. atterberg limits and clay activity according to the age of reclaimation showed negative correlation. but sand content and N-value were positive in them. 3. Cone index was lower than $3kg/cm^2$ for the first 5 years after reclaimation in both soil series, and the formation of hard pan were 33rd and 49th year after reclamation in Gwanghwal and Poseung series respectively, and its thickness was more in Poseung than in Gwanghwal series. 4. Shearing resistance decreased with the age of reclaimation in both soil series. and friction resistance increased in Gwanghwal than Poseung siries. 4. Shearig resistance decreased with the age of reclaimation in both soil series, and friction resistance increased in Gwanghwal than Poseung series. 5. Soil pH. available, $SiO_2$, $Mg^2$, $K^+$, $Na^+$ and C. E. C showed negative correlation. with the year cultivated paddy rice. but O. M. ava ilable $P_2O_5Ca^{2+}$ and T-N had positive one in both soil series. Contents of O. M and $Ca^{2+}$ and T-N had positive one in both soil series. Contents of O. M and $Ca^{2+}$ were high in Gwanghwal, but C. E. C. was in Poseung series.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.3
• /
• pp.195-200
• /
• 1994

This study was conducted to evaluate the changes in barley yield some physico-chemical properties of soils affected by annual application of N.P.K and N.P.K+silicate fertilizer 250kg/10a and N.P.K+compost 1,000kg/10a to the silty clay loam upland soil during the 18 years from 1975 to 1992. The results obtained are as follows. 1. Barley yield of the 18th year increased by 17~18% in the treatments of N.P.K+compost annually applied in comparison with N.P.K treated plot. So, simillar effect was recognized between the silicate fertilizer and the compost treatment plot. 2. The amount of nutrient's uptake by barley plant at the harvesting stage in the treats of N.P.K+silicate fertilizer and N.P.K+compost annually applied increased by 6~8% in comparison with N.P.K treated plot. Fertilizer's efficiency remarkably increased with $P_2O_5$, and $K_2O$ in the treats of N.P.K+silicate fertilizer and N.P.K+compost annualy applied comparing to N.P.K treated Plot. 3. According to soil analysis after experiment, the N.P.K+silicate fertilizer and N.P.K+compost annually applied plot were increased in soil pH, OM, available $P_2O_5$ exchangable cations and soluble $SiO_2$ content, but the content of $NO_3$-N was low. 4. Average yield of barley for 18 years increased by 22% in the treat of N.P.K+silicate fertilizer 250kg/10a annually applied plot and by 31% in the treat of N.P.K+compost 1,000kg/10a annually applied plot in comparison with N.P.K treated plot.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.374-380
• /
• 2015

The quality characteristics of the woodpellet manufactured from two domestic pines (Pinus densiflora S. et Z. and Pinus rigida Mill.) were investigated for the efficient energy use of woody biomass resources. Properties of woodpellets such as moisture content, heating value, ash content, apparent density and durability were determined by using the standard test method of woodpellets of Korea Forest Research Institute (KFRI) and elemental analysis. The results of elemental analysis for C, H, O and N showed 61.42% carbon, 5.56% hydrogen, 32.87% oxygen, and 0.15% nitrogen for Pinus densiflora S. et Z. and 61.03% carbon, 5.96% hydrogen, 32.83% oxygen, and 0.18% nitrogen for Pinus rigida Mill. No significant difference between Pinus densiflora S. et Z. and Pinus rigida Mill was observed on elemental analysis. Heating values of each woodpellet were ranged from 19.00 to 19.42 MJ/kg which satisfied the first grade quality standard (${\geq}18.0MJ/kg$) by KFRI. The ash contents of woodpellet were slightly different between Pinus densiflora S. et Z. and Pinus rigida Mill., and satisfied the first grade quality standard (${\leq}0.7%$) by KFRI. Apparent density of woodpellet (Pinus densiflora S. et Z.) was passed the first grade standard level (${\geq}640kg/m^3$), and woodpellets from Pinus rigida Mill. satisfied the second grade quality of the standard. The moisture contents of each woodpellet were satisfied by the first grade quality standard (${\leq}10%$). The durability of woodpellet (Pinus densiflora S. et Z.) was passed the third grade level (${\geq}95%$), but Pinus rigida Mill. woodpellet was insufficient to satisfy the quality standard.

• Journal of Korean Society of Forest Science
• /
• v.102 no.3
• /
• pp.345-354
• /
• 2013

To understand the community structures of the vegetation of the beaches and coastal dunes of Seocheon-gun, Boryeong-si, Anmyeon-do, Taean-gun in Chungcheongnam-do and Buan-gun in Jeollabuk-do at the west coast of South Korea, a plant sociological vegetation survey was carried out to make a classification of correlation vegetation communities, a cluster analysis and an inorganic component analysis on the soil and plant body. Regarding the vegetation of the coastal dunes, plant communities were classified into 31 communities by correlation dominant species, and as a result of a cluster analysis on the vegetation communities, they were classified into five vegetation types such as Calystegia soldanella community, Rosa rugosa community, Imperata cylindrica community, Vitex tend community and Elymus mollis community. The soil pH was highest in Seocheon area ($7.54{\pm}1.18$) while lowest in Buan area ($6.29{\pm}2.15$), and regarding inorganic components, the nitrogen content was highest in Robinia while lowest in Imperata cylindrica. The soil PH of vegetation I was highest (8.23) among the five vegetation types, and the organic matter was lowest (71.58). As a result of CCA ordination analysis to examine the correlation among environmental factors, Calystegia soldanella community, Rosa rugosa community and Imperata cylindrica community among the five vegetation types were distributed while they were not affected by soil environmental elements, but Vitex tend community and Elymus mollis community were distributed mainly at the places with high $K^+$ content in the soil.

• Journal of Korean Society of Forest Science
• /
• v.105 no.2
• /
• pp.177-185
• /
• 2016

Fertilization is required to keep the balance of tissue nutrients and to produce high quality seedlings at the permanent nursery. This study was conducted to verify the optimum fertilization method for Fraxinus rhynchophylla, F. mandshurica, Pinus koraiensis, and Abies holophylla seedlings with vector diagnosis method. Seven treatments include nitrogen (N, $13.8g{\cdot}m^{-2}$), phosphorus (P, $6.1g{\cdot}m^{-2}$), potassium ($7.5g{\cdot}m^{-2}$) fertilization and 1x (N $6.9g{\cdot}m^{-2}$, P $3.05g{\cdot}m^{-2}$, K $3.65g{\cdot}m^{-2}$), 2x (twice of 1x), 4x (four times of 1x) fertilization and no fertilization. Soil pH decreased as fertilization increased. Nitrogen and NPK fertilization decreased exchangeable $Ca^{2+}$ and $Mg^{2+}$ concentrations. Height and root collar diameter of F. rhynchophylla and F. mandshurica significantly increased with N and NPK fertilization, but those of P. koraiensis and A. holophylla did not. The biomass of F. rhynchophylla and F. mandshurica was about twice higher at NPK fertilization compared to the control. The responses of vector diagnosis were different by tree species and fertilization treatment: F. rhynchophylla was in the status of N "dilution", which means the N concentration decreases with N content. Phosphorus and K were "sufficiency" state with 4x fertilization. F. mandshurica showed "retranslocation" as N content decreased without change of dry weight at N, P, K fertilization, but "dilution" state at NPK fertilization. This result suggested that optimal fertilization was required for F. rhynchophylla and F. mandshurica in seedling production stage, but was not essential for P. koraiensis and A. holophylla.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.7
• /
• pp.1103-1108
• /
• 2013

This study was conducted in order to determine the effect of autoclave and microwave treatments on cookies. Wheat dough was treated in an autoclave (30 min), a microwave (1 min), and both autoclave and microwave (30 min/1 min). The treated dough was baked or non-baked and cookies quality was assessed. The pH, moisture content, color, and texture were measured, and sensory evaluation was performed. The pH showed a slight increase when dough was treated in a microwave (before baking) and decreased in both the autoclave and autoclave/microwave (after baking) treatments. The moisture content showed a significant increase, compared to the control, in autoclave treatments. Regarding surface color of cookies, lightness was decreased in all treatments and redness was higher compared with the control, except for microwave (before baking), and yellowness was lower compared to the control, except for microwave treatment (after baking). Hardness, gumminess, chewiness, and shear force showed a significant increase when dough was treated in an autoclave/microwave (after baking) compared to the control. In the sensory evaluation, color, taste, texture, shape, and overall preference of cookies treated with an autoclave/microwave (after baking) showed a low score. These results suggest that autoclaving and microwaving may reduce the quality of bread and that preparation of countermeasures is necessary.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.161-166
• /
• 2005

Objectives of this study were to select inbred lines which have a good eating quality and desirable segregates during inbreeding of waxy corn. The 64 inbred lines showed a large variance in their kernel shape and weight. 100-kernel weight, pericarp thickness, kernel length, kernel width, and kernel thickness ranged $11.7\~37.3g,\;11\~77{\mu}m,\;5.8\~9.6mm,\;6.5\~10.0mm$, and $4.1\~6.8mm$, respectively. The physicochemical analysis of 64 waxy corn inbred lines showed crude protein, crude fat, free sugar, and amylopectin content ranging $8.7\~15.8\%,\;2.3\~5.8\%,\;1.1\~11.0\%,\;and\;78.5\~93.8\%$, respectively. The texture property analysis of 64 inbred lines by texture analyzer showed a big difference. Gumminess, hardness, and chewiness of 64 inbred lines ranged $91\~383,\;181\~394,\;and\;73\~370$, respectively. The principal component analysis for 14 characteristics related to kernel quality showed that $73.1\%$ of the total variation could be attributed to the first five principal components. Biological meaning of the principal component was explained clearly by the correlation coefficient between principal components and characters. The first principal component appeared to correspond to small kernel and bad eating quality, The second principal component appeared to correspond to large kernel and good eating quality. The 64 inbred lines were classified into 8 groups by the cluster analysis using the first and second principal component. Among the groups, group VII and VIII included inbred lines with good eating quality that had thin pericarp thickness, low protein content, large kernel, and soft tenderness.