• 제목/요약/키워드: Shoulder strength

검색결과 310건 처리시간 0.029초

Influence of preparation design on fracture resistance of different monolithic zirconia crowns: A comparative study

  • Findakly, Meelad Basil;Jasim, Haider Hasan
    • The Journal of Advanced Prosthodontics
    • /
    • 제11권6호
    • /
    • pp.324-330
    • /
    • 2019
  • PURPOSE. The aim of the study was to evaluate and compare the fracture resistance and modes of fracture of monolithic zirconia crowns with two preparation designs. MATERIALS AND METHODS. Forty human maxillary first premolar teeth were extracted for orthodontic purposes and divided into two main groups (n=20): Group A: monolithic traditional zirconia; Group B: monolithic translucent zirconia. The groups were further subdivided into two subgroups (n=10): (A1, B1) shoulder margin design; (A2, B2) feather-edge margin design. Teeth were prepared with either a 1 mm shoulder margin design or a feather-edge margin design. The prepared teeth were scanned using a digital intraoral scanner. The crowns were cemented using self-adhesive resin cement. All cemented teeth were stored in water for 7 days and thermocycling was done before testing. All samples were subjected to compressive axial loading until fracture. The fractographic analysis was done to assess the modes of fracture of the tested samples. RESULTS. The highest mean values of fracture resistance were recorded in kilo-newton and were in the order of subgroup A1 (2.903); subgroup A2 (2.3); subgroup B1 (1.854) and subgroup B2 (1.523). One-way ANOVA showed a statistically significant difference among the 4 subgroups. Concerning modes of fracture, the majority of samples in subgroups A1 and B1 were fracture of restoration and/or tooth, while in subgroups A2 and B2, the majority of samples fractured through the central fossa. CONCLUSION. Even though all the tested crowns fractured at a higher level than the maximum occlusal forces, the shoulder margin design was better than the feather-edge margin design and the monolithic traditional zirconia was better than the monolithic translucent zirconia in terms of fracture strength.

푸시 업 자세 시 팔굽관절 각도와 어깨넓이 간격에 따른 구획별 4 배 곧은근 근활성도 비교 (The Comparison of Muscle Activity in 4 Sections of Rectus Abdominis by The Distance of The Shoulder Width and The Angle of The Elbow Joint in The Position of Push-Up)

  • 문교훈;김경훈
    • 대한물리치료과학회지
    • /
    • 제24권1호
    • /
    • pp.14-21
    • /
    • 2017
  • Background; This study was to investigate effects of distance of muscle activity of 4 sections of rectus abdominis(RS-RA, LS-RA, RI-RA, LI-RA) by the shoulder width(x0.5, x1.0, x1.5) and the angle of the elbow joint($0^{\circ}$, $45^{\circ}$, $90^{\circ}$) Method : This study was conducted on 20 healthy male and 20 female adult. respectively, elbow joints were maintained at $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ flex postures on The shoulder width is 0.5, 1.0, and 1.5 times. at the same time 4 sections of rectus abdominis were measured using EMG with maintaining isometric contraction of the rectus abdominis for 5 seconds. Results; The results were as follows: First, muscle activity of 4 sections of rectus abdominis(RS-RA, LS-RA, RI-RA, LI-RA) by angle of the elbow joint($0^{\circ}$, $45^{\circ}$, $90^{\circ}$) was a statistically significant(p<0.05), Second, muscle activity of 4 sections of rectus abdominis(RS-RA, LS-RA, RI-RA, LI-RA) by the shoulder width(x0.5, x1.0, x1.5) was a statistically non-significant Conclusion; It was found to be most effective to perform arm posture with rectus abdominis muscle strength exercise.

  • PDF

Comparative Study of Infraspinatus and Posterior Deltoid Muscle Activation According to Angle of External Rotation of Glenohumeral Joint

  • Yang, Dongseok;Choi, Wonho
    • 국제물리치료학회지
    • /
    • 제11권2호
    • /
    • pp.2071-2076
    • /
    • 2020
  • Background: Based on the understanding of the muscle activation relationship between the infraspinatus and posterior deltoid muscles to according to the angle of motion during external rotation on glenohumeral joint, effective shoulder joint strengthening exercise for the prevention and rehabilitation of shoulder injury due to muscle strength imbalance can be performed by achieving the ideal muscle activity ratio during exercise. Objectives: To compare and analyze the muscle activation changes and activity ratio of the infraspinatus and posterior deltoid muscles according to the glenohumeral external rotation angle. Design: Quasi-randomized trial. Methods: The study included 48 healthy male and female adults who provided informed consent for participation in the study. All the subjects performed isometric glenohumeral external rotation by setting the angle of motion to 30°, 45°, and 60° using a 5 kg resistance weight pulley. On surface electromyography, the differences in muscle activation and activity ratio between the infraspinatus and posterior deltoid muscles were investigated. Results: A significant difference in muscle activation was found in the comparison between the infraspinatus and posterior deltoid muscles according to the glenohumeral external rotation angle (P<.05). The muscle activation levels of the infraspinatus and posterior deltoid muscles were highest at the external rotation angles of 30° and 60°, respectively. The muscle activity ratio between the infraspinatus and posterior deltoid muscles also showed a significant difference (P<.05) and was highest at the shoulder external rotation angle of 30°. Conclusion: The findings of this study suggest that muscle activity is the highest at the shoulder external rotation angle of 30° in healthy individuals.

Does physiotherapy after rotator cuff repair require supervision by a physical therapist?: a meta-analysis

  • Masaki Karasuyama;Masafumi Gotoh;Takuya Oike;Kenichi Nishie;Manaka Shibuya;Hidehiro Nakamura;Hiroki Ohzono;Junichi Kawakami
    • Clinics in Shoulder and Elbow
    • /
    • 제26권3호
    • /
    • pp.296-301
    • /
    • 2023
  • Background: A supervised physiotherapy program (SPP) is a standard regimen after surgical rotator cuff repair (RCR); however, the effect of a home-based exercise program (HEP), as an alternative, on postoperative functional recovery remains unclear. Therefore, the purpose of this meta-analysis was to compare the functional effects of SPP and HEP after RCR. Methods: We searched electronic databases including Central, Medline, and Embase in April 2022. The primary outcomes included the Constant score, American Shoulder and Elbow Surgeons score, University of California Los Angeles shoulder score, and pain score. Secondary outcomes included range of motion, muscle strength, retear rate, and patient satisfaction rate. A meta-analysis using random-effects models was performed on the pooled results to determine the significance. Results: The initial database search yielded 848 records, five of which met our criteria. Variables at 3 months after surgery were successfully analyzed, including the Constant score (mean difference, -8.51 points; 95% confidence interval [CI], -32.72 to 15.69; P=0.49) and pain score (mean difference, 0.02 cm; 95% CI, -2.29 to 2.33; P=0.99). There were no significant differences between the SPP and HEP. Other variables were not analyzed owing to the lack of data. Conclusions: Our data showed no significant differences between SSP and HEP with regard to the Constant and pain scores at 3 months after RCR. These results suggest that HEP may be an alternative regimen after RCR. Level of evidence: I.

가쪽위관절융기 통증 환자에서 복합 부위와 단일 부위에 기능적 마사지와 스트레칭을 적용할 때 통증, 압통 역치와 악력에 미치는 영향 (Effects of Multi-site and Single-site Functional Massage and Stretching on Pain, Tenderness Threshold and Grip Strength in Patients with Lateral Epicondylalgia)

  • 정민근;전재국;신의주
    • 대한정형도수물리치료학회지
    • /
    • 제29권3호
    • /
    • pp.13-22
    • /
    • 2023
  • Background: The purpose of this study was to investigate the effects of functional massage and stretching, applied to the elbow and shoulder joints, on pain, tenderness threshold, and grip strength. Methods: A total of 29 individuals were assigned to a single site (n=15) or multiple sites (n=14). Pain measured through the visual analogue scale (VAS), tenderness threshold (TTH), and grip strength (GI) were measured before and four weeks after the intervention. Results: After four weeks of treatment, visual analogue scale significantly decreased in both groups (p<.05), and the tenderness threshold and grip strength significantly increased in both groups (p<.05). There was also a significant difference between the two groups (p<.05). Conclusion: The reduction of visual analogue scale and the increase in the tenderness threshold and grip strength were more significant in the multi-site treatment group than in the single-site treatment group.

  • PDF

Kinesio taping이 근력, 혈중 피로물질 및 근 손상 물질 농도변화에 미치는 영향 (The Effect of Kinesio Taping on Muscle Strength Improvement, Blood Fatigue Factors, Muscle Fatigue and Damage Index)

  • 이민선;백일영;곽이섭;노희태;진화은
    • 생명과학회지
    • /
    • 제20권6호
    • /
    • pp.870-876
    • /
    • 2010
  • 본 연구의 목적은 kinesio taping 적용이 근력 향상에 미치는 영향을 직 간접적으로 관찰함으로써 운동 수행시의 상해예방 및 수행력 향상을 위한 수단으로서의 taping 요법에 대한 기초 자료를 제공하는데 있었다. 본 연구는 남자 대학생 10명을 대상으로, 근력 향상의 정도를 직접적으로 관찰하기 위하여 1RM test와 Cybex test를 실시하였으며, 생리학적 변인으로는 CK, LDH, phosphorus, ammonia, creatinine, IGF-I의 6가지 혈중 성분을 분석함으로써 피로와 근 손상의 정도를 분석하였다. 본 연구를 통하여 kinesio taping은 근력향상의 직접적인 지표(1RM, 등속성 운동능력)에는 긍정적으로 작용했지만, 85%-1RM의 웨이트트레이닝 시의 근 피로 또는 근 손상 지표물질의 농도는 유의하게 감소시키지 못함을 알 수 있었다. 하지만 본 연구의 결과만을 가지고 taping의 적용이 피로 및 근 손상 완화 효과가 없다고 판단할 수는 없을 것으로 생각된다. 왜냐하면, 본 연구에서의 피로 및 근 손상 유발 수단인 85%-1RM 웨이트트레이닝은 고강도의 운동이며 운동에 소요된 시간도 40분 정도로 장시간이지만 다양한 근육부위에 적은 반복수와 set를 적용하였기 때문에 피로 및 근 손상 지표물질의 축적이 현저하지 않았을 수 있기 때문이다. 이는 taping 적용 후 나타난 여러 혈중성분들의 감소(Creatinine 제외) 경향으로 설명할 수 있으며, 실제로 선행 연구 중 특정 대근육에 대한 반복적인 운동에 kinesio taping을 적용하여 피로 및 근 손상 완화를 입증하기도 하였다. 본 연구가 가지는 의의는 특정 동작에 있어서의 근력 향상을 중점적으로 관찰한 연구가 아닌, 전신에 대한 taping을 적용한 후 각 근육 부위에 어떠한 영향을 미치는지 다양한 관점에서 관찰하였다는 데 있다. 이후의 연구에서는 본 연구에서 관찰한 변인들 이외에도 신경계통의 변인들과의 상관관계도 함께 관찰 하는 통합적인 연구도 의의가 있다고 하겠다.

수직적 교합고경의 증가가 사지 근력에 미치는 영향에 관한 연구 (Effect of Increase in Occlusal Vertical Dimension on Appendage Muscle Strength)

  • 안수진;이성복;이석원
    • 구강회복응용과학지
    • /
    • 제26권2호
    • /
    • pp.169-178
    • /
    • 2010
  • 연구목적 : 이 연구는 수직적 교합고경의 증가에 따른 사지 근력에 대한 영향을 관찰하고자 하였다. 연구재료 및 방법 : 평균 연령 21세의 10명의 남자를 선발하였다. 상악피개형의 교합장치를 제작하여 장치를 착용하지 않은 교두감합 (Intercuspal Position, ICP)시와 2mm, 3.5mm 그리고 5mm 수직적 교합고경을 증가시킨 위치에서 각각의 근력을 Cybex II dynamometer (Lumex Inc., Ronkonkoma, NY, USA)를 이용하여 측정하였다. 결과 : 측정한 14가지 동작 중 hip의 굴곡운동과 신전운동, forearm의 회외운동, shoulder의 내전운동, knee의 외전운동과 내전운동, ankle의 배측굴곡과 족측굴곡에서 교합장치의 장착시 근력의 유의한 증가를 보였다 (p<0.05). 결론 : 이 연구의 결과로 볼 때 수직적 교합고경을 증가시켰을 때 대부분의 동작에서 평균근력이 증가된다고 결론지을 수 있었다. 특히 3.5mm 수직적 교합고경을 증가시켰을 때 가장 높은 평균근력 증가율을 보였다.

인체미의 이상형에 따른 패션 일러스트레이션의 변화 (A Change of fashin IIIustration by the Ideal Type of Human Body Beauty)

  • 전경숙
    • 복식
    • /
    • 제28권
    • /
    • pp.65-84
    • /
    • 1996
  • The purpose of this study is to analyze the relation between the beauty of human body and the fashion illustration in each period And I attained my object through the investigation of features and changes of illustration which is given a vivid description of the features and development of ideal humam body beauty. By various methods I studied this subject. Frist I refered to sundry records Secondly I investiated the fashion illustrations which are included in Vogue. On the basis of this data I grasped the ideal types of human body beauty which is founded during the social change in each 10 years. And I analyzed the relation be-tween the ideal type and fashion illustration which show the change of fashion. The summary of result is as follows. 1. In the early part of the 20th century the beauty of human body is represented with the figure of large-sized beauty which emphasize shoulder and bust. And fashion ikllustration show 9 life-size broad shoulder full bust lim waist and hourglass silhouette. 2, In the 1910s the swell of strength vanishes gradually and shoulder and sleeve are straight type. And fashion illustration show 7 life-size high waist line. And that is tublar sil-houette of high waist and streamline shape in which bust and hip are not emphasized. 3. In the 1920s the ideal type of human body beauty is straight type which shows flat bust and unexaggerate hip. And fashion illus-tration is about 8 life-size tublar silhouette of low waist and lunger and slimmer and young style in which bust and hip are not emph-asized. 4. In the 1930s the ideal is womamly slim and long style. Fashion illustration is about 8 life-size and slim & long silhouette in which waist line is emphasized and bust and hip line come out. 5. In the 1940s the ideal type is womamly style which has narrow shoulder rich bast and slim waist. And fashion illustration is about 7 life-size and hourglass silhouette which has unartificial shoulder slim waist and empha-sized bust. 6. In the 1950s the ideal type is that of ro-bust health which emphasize build and muscu-lar system. And fashion illustration is 8.5 life-size and show full bust and made waist slimmer. That is sheath silhouette. 7. In the child who has full face with large eyeball slender and long leg: narrow and immatured body comparatively big head. And fashion illus-tration is 7 life-size and show slim and long neck flat bust long and slim limbs and big head. That is H type silhouette. 8. In the 1970s the ideal type is high stat-ure flat breast small hip and wide shoulders. And fashion illustration is wide shoulders and slim waist as 11 life-size and straight sil-houete. 9. In the 1980s the ideal type is extremely emphasized breadth of shoulder because healthy body and muscle are recognized as the symbol of ideal attractiveness. And fashion il-lustration is about 8.5 life-size and show mus-cular slim type that is slim silhouette. 10 At the present time the ideal type is slim and tall type which is empasized healthy beauty. And fashion illustration is 12 life-size which has healthy body and skin So that is slim and long type.

  • PDF

냉간 전조압연 공정에서의 성형조건에 따른 재료의 물성변화분석 (Experimental Study for Enhancement of Material Strength In Cold Cross Wedge Rolling Process)

  • 윤덕재;김인호;최석우;임성주;이형묵
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2004년도 추계학술대회논문집
    • /
    • pp.319-324
    • /
    • 2004
  • Cross wedge rolling process is utilized to manufacture multi-stepped axis symmetrical parts. This process is generally performed under high temperature conditions in order to induce serious deformation. But cold cross wedge rolling process has been rarely studied due to the limits of deformation. Recently, the cold cross wedge rolling process has been utilized to enhance the material strength in specified parts of manufactured products. In this paper, experimental researches were carried out with various forming conditions of cold cross wedge rolling process in order to suggest the design guidance to make preform for cold cross wedge rolling. The tensile strength and the surface hardness of specified region were compared to that of initial material with the variation of the area reduction and the rotational speed of rolling die. With respect to the area reduction, the maximum tensile strength was linearly increased and the surface hardness was rapidly increased within lower percent of area reduction. The surface hardness was saturated over the rotational die speed of 0.8 RPM.

  • PDF

베하스(BeHaS)운동프로그램이 집단시설 거주 노인의 근력과 유연성에 미치는 효과 (The Effects of BeHaS Exercise Program on Muscle Strength and Flexibility in Institutionalized Elders)

  • 김선애
    • 근관절건강학회지
    • /
    • 제18권1호
    • /
    • pp.93-102
    • /
    • 2011
  • Purpose: The purpose of this study was to identify the effects of the BeHaS exercise program, developed by Jong Im Kim (2006), consisting of exercise, education and cognitive support on muscle strength and flexibility in elders who live in elderly facilities. Method: This study was designed using one group pretest-posttest experimental design, 19 elders, the subjects of the group participated in the BeHaS exercise program. The BeHaS exercise program was provided for 60-80 minutes per session once a week for 8 weeks. Data was collected by research assistants using structured interview and measurement tool, from January, 2011 to March, 2011. Data were analyzed using the SPSS Win 17.0, general characteristics were analyzed with real number and percentage, muscle strength and flexibility were analyzed with Mean and SDs. Results: There were significant increase pre and post test for the left shoulder flexibility (p=.000) and waist flexibility (p=.030). Conclusion: In conclusion, this study confirms that BeHaS exercise program played a useful role in partial improving flexibility in the Institutionalized Elders.