• Clinics in Shoulder and Elbow
• /
• 제15권2호
• /
• pp.148-153
• /
• 2012

다양한 이두근 건고정술이 시행되고 있어서, 문헌들의 결과를 단순 비교하기 어렵게 만든다. 이두근 장두의 건고정술은 첫째로, 시술을 관혈적 절개를 통하여 시행하는가 또는 관절경을 이용한 방법으로 시행하는가로 구분해 볼 수 있다. 두 번째로는, 이두건 자체를 고정하는 주변 조직에 따라서 연부 조직 건고정술과 골 고정술로 나눌 수 있다. 세 번째로는, 고정하는 위치에 따라 근위부와 원위부로 구분할 수 있다. 네 번째로는, 건 고정술에 기구(간섭 나사, 봉합 나사, 비매듭 봉합 나사 등)를 사용하는 가에 따라서 구분해 볼 수 있다. 적절한 고정력이 어느 정도인지 밝혀지기까지는 단정적인 결론은 보류되어야 한다.

• 대한정형도수물리치료학회지
• /
• 제23권1호
• /
• pp.31-41
• /
• 2017

Background: The purpose of this study was investigate the effects of scapular posture correction taping in painful shoulders with breast cancer women. Method: This study was carried out with a total 35 breast cancer survivors. The subjects were randomized into women a breast cancer taping group (BT, n=15), a breast cancer posture group (BP, n=16). Outcomes such as the Quadruple Visual Analogue Scale, the Shoulder Pain and Disability Index, the muscle strength, and the Quality of Life Questionnaire-cancer were measured before the training and at 4 weeks and 12 weeks after intervention. Result: There were significant variations shoulder pain, dysfunction and Range of Motion among the groups and between points in time (p<.05). However, there was no significant difference upper extremity posture between BT and BP. There were significant variations all ROM muscle strength between the groups and between points in time (p<.05). Conclusion: Applying taping treatment to breast cancer patients proved to decrease in pain and significant in dysfunction. There were significant increase in range of motion.

• 동력기계공학회지
• /
• 제19권4호
• /
• pp.11-16
• /
• 2015

Welding is very popular method for joining two or more metals. In this paper, the three-way factorial design was adopted for obtaining the optimum friction stir welding conditions of Al 5052 alloy. Tools of shoulder diameter of 9, 12, 15 mm and pin length of 1.5 mm were used. Also the material's dimension for welding was $100{\times}100{\times}2mm$, and the tensile specimens were worked by water-jet technique. Welding variables were shoulder diameter, rotating speed of tool and welding speed. As far as this work is concerned, optimum condition for friction stir joint of Al 5052 alloy was predicted as the shoulder diameter of 15 mm, welding speed of 500mm/min and rotating speed of 1000 rpm. In addition, the presumed range of tensile strength under the optimal conditions is estimated to be $208.3{\pm}5.7$ MPa with 99% reliability.

• 구강회복응용과학지
• /
• 제17권4호
• /
• pp.231-244
• /
• 2001

This study was conducted to observe the effect on appendage muscle strength according to increase in occlusal vertical dimension. For this study, ten males with a mean age of 21 were selected. The subjects had a complete or almost complete set of natural teeth and reported no subjected symptoms of pain or dysfunction in the masticatory system. The tested occlusal splints were made at the position of increased occlusal vertical dimension of 2mm, 3.5mm, and 5mm from the ICP. Before and after wearing occlusal splints, the appendage muscle strength were tested by CybexII Dynamometer in each subject. The results were as follows : 1. When occlusal vertical dimension was increased, most of mean muscular strength values were increased except for those of supination and pronation of forearm at the position of 5mm increased occlusal vertical dimension. 2. The statistical analyses demonstrated that the increased occlusal vertical dimension position to be significantly stronger than intercuspal position for the muscle strength of the flexion and extension of hip, supination of forearm, external and internal rotation of knee, dorsiflexion and plantarflexion of ankle (p<0.05). 3. At the position of 3.5mm increased vertical dimension displayed the highest mean muscluar strength value than other positions. 4. Statistically demonstrated values, except for supination of forearm, internal rotation of shoulder, were related to lower appendage. Therefore splint was more effective on lower appendage than upper appendage to make muscle strength increased. 5. The mean increased rate of muscular strength tested on knee(57%), ankle(42%), and wrist(20%) were higher than hip(31%), elbow(14%), and shoulder(17%).

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2008년도 제16차 학술대회
• /
• pp.135-135
• /
• 2008

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2005년도 제3차 연수강좌
• /
• pp.198-205
• /
• 2005

1. Many design features including suture type, anchor size and geometry, and anchor material, play a role in the overall strength of the anchor. In addition, technical considerations such as implant orientation, pattern, and location may affect the ultimate success of the repair. 2. Multiple fixation points provide a biomechanically sounder construct in Bankart repair. The size of the glenoid and its rim make anchor size a critical consideration in implant selection and implementation.

• 한국건축시공학회지
• /
• 제15권5호
• /
• pp.473-481
• /
• 2015

공동주택의 구조형식이 점차 기둥식 구조로 바뀌면서 비내력 경량벽체의 수요가 증가하고 있다. 경량벽체는 구조적 안전을 위해 소정의 내력을 확보할 필요가 있다. 본 연구에서는 경량벽체의 정적 수평하중저항성 및 내충격성 시험방법의 기초자료로서 활용하기 위해 인간이 벽체에 가하는 힘을 실험적으로 파악하였다. 정적하중을 가하는 동작으로는 양손 밀기, 어깨 밀기, 등 기대기, 한 손 기대기의 4종류를 설정하였다. 동적하중을 가하는 동작으로는 발뒤꿈치차기, 어깨 부딪치기, 주먹치기의 3종류를 설정하였다. 하중해석 장치의 하중판 강성은 20kN/cm, 4.7kN/cm, 2.2kN/cm의 3종류로 설정하였다. 정적하중 해석결과로부터, 동작별 최대하중비(Pmax/W)는 양손 밀기의 경우 1.17~1.25, 어깨 밀기의 경우 0.95~0.99, 등 기대기의 경우 0.16~0.18, 한 손 기대기의 경우 0.12~0.15인 것을 알 수 있었다. 또한 동적하중 해석결과로부터, 동작별 최대하중비(Pmax/W)의 상한 값은 발차기의 경우 약 10.07, 어깨 부딪치기의 경우 4.46, 주먹치기의 경우 약 5.58인 것을 알 수 있었다.

• Clinics in Shoulder and Elbow
• /
• 제23권2호
• /
• pp.100-104
• /
• 2020

Function and strength of the deltoid muscle are important in reverse shoulder arthroplasty (RSA). Moreover, location and shape of the acromion, clavicle, and scapular spine, which are origins of the deltoid muscle, are also important. The frequency of os acromiale is 5% to 15%; however, it is rare in the Asian population, affecting approximately 0.7% of Koreans. RSA has rarely been reported in patients with os acromiale. We present a case series of two patients with cuff tear and arthropathy combined with os acromiale who underwent RSA. From 2016 to 2018, two patients with os acromiale who presented with pain and limited range of motion (ROM) underwent RSA with cuff tear arthropathy using the subscapularis-sparing deltopectoral approach. Their ROM, visual analog scale (VAS), and satisfaction were evaluated before and after surgery. In both patients, VAS decreased, ROM increased, and postoperative satisfaction increased. There were no specific complications due to os acromiale. The VAS, ROM, and satisfaction of patients improved after surgery compared with values before surgery. However, careful attention must be given during surgery to ensure optimal repair and recovery.

• Clinics in Shoulder and Elbow
• /
• 제24권3호
• /
• pp.141-146
• /
• 2021

Background: The purpose of the present study was to determine how long superior screws alone or in combination with posterior placement of metaglene screws protruding and penetrating into the scapular spine in reverse total shoulder arthroplasty affect the strength of the scapular spine in a fresh cadaveric scapular model. Methods: Seven fresh cadaver scapulas were allocated to the control group (short posterior and superior screws) and seven scapulars to the study group (spine base fixation with a four long screws, three with both long superior and long posterior screws). Results: The failure load was lower in the spine fixation group (long screw, 869 N vs. short screw, 1,123 N); however, this difference did not reach statistical significance (p>0.05). All outside-in long superior or superior plus posterior screws failed due to scapular spine base fracture; failures in the short screw group were due to acromion fracture. An additional posterior outside-in screw failed to significantly decrease the failure load of the acromion spine. Conclusions: The present study highlights the significance of preventing a cortical breach or an outside-in configuration when a superior or posterior screw is inserted into the scapular spine base.

• Clinics in Shoulder and Elbow
• /
• 제11권1호
• /
• pp.13-18
• /
• 2008

견관절의 모든 병적 상황의 성공적인 치료에는 정확한 진단이 요구된다. 이학적 검사는 견관절 질환의 검사에 필수적인 요소이다. 통증, 근력의 저하, 운동범위의 감소, 그리고 불안정성은 다양한 견관절 병태생리에 의해 발생하는 가장 흔한 증상들이다. 따라서, 견관절 질환을 가진 환자에게 정교한 임상적 접근이 필수적이다. 다양한 진단적 검사와 임상적 측정을 포함한 표준화된 평가가 견관절 복합체에서 한 구성요소를 특정하게 검사함으로써 진단적 정확도를 향상시킨다. 대부분의 경우, 신중한 이학적 검사가 진단과 확진 및 추가적 조사를 위해 선택적으로 시도될 수 있는 영상학적 시술과 같은 특정 진단 기술을 계획하거나 제공하게 된다.