DOI QR코드

DOI QR Code

Characteristics of the Human Strength Acting on the Lightweight Wall of Buildings

인간이 경량벽체에 가하는 수평하중의 크기에 관한 연구

  • Received : 2015.07.27
  • Accepted : 2015.09.07
  • Published : 2015.10.20

Abstract

The purpose of this research is to comprehend experimentally the characteristics of human strength for using as the basic data of impact resistance test method of lightweight wall. Human motions exerting static load are classified to 4 types. Pushes with two hands or shoulder are defined as the instantaneously forcing motions with hands or shoulder put on the force plate. Leanings back or one-hand against the wall are defined as motions of taking a rest in their respective comfortable posture. Human motions exerting dynamic load are classified to 3 types. Selecting 3 levels of motion strength (weak, middle, strong), 3 levels of force plate stiffness (A: 20kN/cm, B: 4.7kN/cm, C: 2.2kN/cm), and 30 male subjects, load was measured when they applied strength to the force plate. Results of this research are as follows: (1) The maximum load ratio (Pmax/W) of static load for each motion was 1.17-1.25 in two hands pushing, 0.95-0.99 in shoulder pushing, 0.16-0.18 in back leaning, and 0.12-0.15 in one hand leaning. (2) Human dynamic load and object collision were different in the load characteristics. (3) The maximum load ratio of dynamic load for each motion was 10.07 in heel kick, 4.46 in shoulder hitting, and 5.58 in fist blow.

공동주택의 구조형식이 점차 기둥식 구조로 바뀌면서 비내력 경량벽체의 수요가 증가하고 있다. 경량벽체는 구조적 안전을 위해 소정의 내력을 확보할 필요가 있다. 본 연구에서는 경량벽체의 정적 수평하중저항성 및 내충격성 시험방법의 기초자료로서 활용하기 위해 인간이 벽체에 가하는 힘을 실험적으로 파악하였다. 정적하중을 가하는 동작으로는 양손 밀기, 어깨 밀기, 등 기대기, 한 손 기대기의 4종류를 설정하였다. 동적하중을 가하는 동작으로는 발뒤꿈치차기, 어깨 부딪치기, 주먹치기의 3종류를 설정하였다. 하중해석 장치의 하중판 강성은 20kN/cm, 4.7kN/cm, 2.2kN/cm의 3종류로 설정하였다. 정적하중 해석결과로부터, 동작별 최대하중비(Pmax/W)는 양손 밀기의 경우 1.17~1.25, 어깨 밀기의 경우 0.95~0.99, 등 기대기의 경우 0.16~0.18, 한 손 기대기의 경우 0.12~0.15인 것을 알 수 있었다. 또한 동적하중 해석결과로부터, 동작별 최대하중비(Pmax/W)의 상한 값은 발차기의 경우 약 10.07, 어깨 부딪치기의 경우 4.46, 주먹치기의 경우 약 5.58인 것을 알 수 있었다.

Keywords

References

  1. Lee SO, Kim SA. A study on the development and application of movable partition components for facilitating of long-life housing. Journal of the Korea Housing Association. 2010 Dec;21(6):91-8. https://doi.org/10.6107/JKHA.2010.21.6.091
  2. An JH, Yeo IW, Park JS. A study on the fire safety performance of apartment house interior finish wall lightweight drywall. Journal of the Korean Society of Hazard Mitigation. 2015 Feb;15(1):215-21. https://doi.org/10.9798/KOSHAM.2015.15.1.215
  3. Ono H, Choi SK. Analysis of human dynamic force applied to floors and walls : study on an evaluation method of fracture of framed floors and walls by human dynamic force (Part 1). Journal of structural and construction engineering, Architectural Institute of Japan. 1994 Jun;(460):27-35.
  4. Matsushita K, Izumi M. Data concerning architectural load (Part 6) : physical strength, A. Transactions of the Architectural Institute of Japan. 1957 Jun;(56):22-9.
  5. Endo Y, Naoi H, Uno H. A Study of forces applied to buildings by man (Part 1). Transactions of the Architectural Institute of Japan. 1980 Dec;(298):99-105.
  6. Tanaka K, Iwai K, Naoi H. Experimental study to grasp distributions of force applied to buildings by man. Summaries of technical papers of Annual Meeting Architectural Institute of Japan. 1992 Aug:933-4.
  7. Uchida Y, Uno H, Wu ZC, Yamamoto K. Impact load by human. Summaries of technical papers of annual meeting Architectural Institute of Japan. 1967 Jun;38(2):373-5.
  8. Ichikawa K, Shimada T. Trampling test on asbestos- cement corrugated sheets (materials execution). Transactions of the Architectural Institute of Japan. 1964 Oct;(103):53.
  9. Uchida Y, Uno H, Wu ZC, Yamamoto K. Impact load on building element surface (No.2). Transactions of the Architectural Institute of Japan. 1968 Dec;(154):1-8.
  10. Choi, S. Evaluation method of impact resistance of the materials used for framed walls and floors. Journal of the Architectural Institute of Korea, Structure & Construction. 2004 Jan;20(1):123-31.
  11. Kim JW, Won C, Lee DW, Kim BS, Bae SI, Song JI. Low velocity impact behavior of aluminium and glass-fiber honeycomb structure. Composites Research. 2013 Apr;26(2):116-22. https://doi.org/10.7234/composres.2013.26.2.116