• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.122-125
• /
• 2010

본 논문에서는 부유식 원유저장 해양구조물(FSU; Floating Storage Unit)의 상부 하역구역(Laydown Area) 내에 낙하물(Dropped Object)이 떨어질 경우의 충격 구조 안전성 평가(Structural Safety Assessment)를 수행하여 표준해석 절차서를 정립하고자 한다. 이를 위해서는 내충격 구조해석을 통한 평가 기법을 개발하고 그 기법의 적용성을 검토하여 표준해석 절차서를 정립하는 것이 필요하다. 현재는 충격 구조해석 시나리오를 작성하고 내충격 구조해석을 수행하여 설계기준(design criterion)에 적용하고 있는 중간단계로써 그 결과들을 소개하고자 한다.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.103-113
• /
• 2015

This paper studies impact performance of wire-mesh and steel fiber-reinforced concrete based on high-velocity impact experiments using hard spherical balls. In this experimental study, panel specimens were tested with various parameters such as steel fiber volume fraction, presence/absence of wire mesh, panel thickness, impact velocity, and aggregate size for the comparison of impact resistance performance for each specimen. While improvement of the impact resistance for reducing the penetration depth is barely affected with steel fiber volume fraction, the impact resistance to scabbing and perforation is improved substantially. This was due to the fact that the steel fiber had bridging effects in concrete matrix. The wire mesh helped minimizing the crater diameter of front and back face and enhanced the impact resistance to scabbing and perforation; however, the wire mesh did not affect the penetration depth. The wire mesh also reduced the bending deformation of the specimen with wire mesh, though some specimens had splitting bond failure on the rear face. Additionally, use of 20 mm aggregates is superior to 8 mm aggregates in terms of penetration depth, but for reducing the crater diameter on front and back faces, the use of 8 mm aggregates would be more efficient.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.431-432
• /
• 2009

This study was performed to verify the impact resistance of concrete using coal ash and fiber new materials. As the results of study, the impact resistance of concrete decreased as the mixing ratio of coal ash increased. When the fiber new materials(GF, HPSF) were mixed to the concrete, its resistance was increased.

• Journal of the Korea Society for Simulation
• /
• v.32 no.4
• /
• pp.1-10
• /
• 2023

This study examines the response when the shock by underwater explosion is transmitted to a vertical launch air-vehicle mounted on a ship using modeling and simulation, and is about a plan to increase method shock resistance to protect the air vehicle. In order to obtain an accurate mathematical model, a dynamic characteristic test was performed on similar equipment, and through this, the mathematical model could be supplemented. And, using the supplemented mathematical model, the air vehicle simulated the shock response by the underwater explosion specified in the BV043 standard. As a result of the first simulation, it was confirmed that air vehicle could not withstand shock, and air vehicle protection method using a ring spring type shock absorber was studied. In addition to the basic shape of abosber, it was confirmed that the ring spring absober can be used to increase the impact resistance of a shipborn vertical launch vehicle by performing simulations for each case by changing deseign varables.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.4
• /
• pp.350-358
• /
• 2014

The demand for the lightweight wall has increased as the structure of the multi-unit dwelling has shift to the rahmen structure. The lightweight wall is required to secure certain degree of shock resistance for the structural safety. The study performed the load analysis test for 7 small hard bodies with different masses and shapes and 5 hard materials which applied the impact load on the wall. It was found out from the experiment that different pendulum weight doubled the load maximum even though the shock energy was the same. In addition, the study compared and analyzed the weight of materials and the load of small hard bodies to propose fundamental data for the material design of the lightweight wall.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.10
• /
• pp.1005-1009
• /
• 2017

In this study, the shock resistance of a gas turbine package subjected to a shock load caused by non-contact underwater explosion was investigated using numerical analysis. To perform shock analysis, the time-history shock load was calculated according to BV-043 (German Navy Regulation). The direct transient response analysis in the time domain for the simplified Whole Engine Model (WEM) was performed using the calculated shock load. In addition, the structural integrity of a detailed model was evaluated by considering the shock load transferred to each component. As a result, it was confirmed that the safety factor was at least 1.0 as compared with the reference stress. Finally, the structural and functional integrity of the Engine Management System (EMS) of the gas turbine package was verified through an actual shock test.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.153-157
• /
• 1992

여러 가지 공학 재료들의 기계적인 특성이나 물리적인 특성들은 하중, 온도, 환경과 같은 재료들이 사용되는 여러 가지 조건들에 적합하게 대응되어 결정되어야 한다. 탄화텅스텐계의 초경합금은 내충격성, 내마모성, 내식성, 고항절력등 공구에 필요한 요구사항을 만족시키기 때문에 여러 가지 공구용으로 많이 사용되어 왔다. 본 연구에서는 충격시험기의 텁에스트레인 게이지를 붙여 회로를 구성한 후, 충격실험에서 얻게 되는 최대점의 하중신호를 정적보정 및 동적보정을 사용하여 하중값으로 환산하여 동적 균열개시인성치를 구하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.3
• /
• pp.68-75
• /
• 1993

포락선 인텐시티는 신호의 진폭 변화에 비해 상대적으로 천천히 벼놔한다. 본 논문에서는 이러한 성질을 이용하여 종래의 순시 음향 인덴시티법을 수정한 새로운 포락선 인텐시티법을 제안하여 비정상 신호 해석에 이 기술을 적용하였다. 이 기술의 유효성은 반사체가 있는 무향실 내의 충격성 음원에 대해 수치계산 결과와 실험결과의 비교로부터 검증되었고 또한, 이 기술은 무향실 및 잔향실 내의 평판 타음 음원의 지향특성 해석에 응용되었다. 수치계산 결과 및 측정결과는 일치하였고, 제안된 방법은 종래의 순시 인텐시티법보다 특히 과도특성을 갖는 충격성 음원 분석에 보다 유효함이 확인되었다.

• The Korean Journal of Rheology
• /
• v.3 no.1
• /
• pp.30-37
• /
• 1991

제 2세대 bismaleimide의 일종인 Boots Technochemie 사의 Compimide 800을 매트 릭스 수지로 선정하여 여기에 촉매(DABCO 0.2wt%) 및 반응성 내충격성 증진제(TM 120; 15. 30, 60 part)를 첨가하여 Carbon/BMI 적층판($\pm$ 45。)2s를 만들어 인장 시험을 하여 in-plane shear하에서의 파단특성을 조사하였다, 이경우에 전단 탄성율을 망목상구조의 특성 에 의해 좌우되고 전단강도는 파단면의 형태와 밀접합 관계가 있다. TM 120을 30 part 첨 가한 경우의 전단강도가 가장 우수하였다

• Journal of Ocean Engineering and Technology
• /
• v.9 no.1
• /
• pp.152-152
• /
• 1995