• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.269-272
• /
• 2004

Different methods of cold storing of bivoltine eggs are in practice to postpone hatching. Bivoltine eggs undergo hibernation if they are not acid treated within 20 - 24 hrs of oviposition, which depends on race, ambient temperature and humidity. The schedules adopted for cold storing include hibernation schedule (Hib), ordinary chilling (OC), short term chilling (STC) and acid treated layings (AT). Peanut cocooning race ${NB_4}{D_2}$ has been subjected for the present assessment. Cocoons harvested from the crop pertaining to all the four methods of cold storing have been used for producing different combinations and acid treated followed by rearing. The performance in respect of chawki loss, maximum larval weight 4({5^th} age)$, yield/ 10,000 larvae (no), cocoon and shell weight showed maximum values for hibernation ${\times}$ hibernation combination followed hibernation with OC and hibernation with AT. Lowest performance was recorded when STC batch source females were used.

• KDI Journal of Economic Policy
• /
• v.35 no.4
• /
• pp.95-136
• /
• 2013

Using Workplace Panel Survey of 2005, 2007 and 2009 waves, this study estimates the effects of trade unions on employment and the proportion of irregular workers, short-term and part-time workers, and agent temporary and outsourced workers. While the estimation result shows that the percentage of hired workers increases under union presence, these results seem to be contaminated with bias because the differences between unionized firms before union establishment and non-unionized firms are not completely controlled even after adjusting for observed characteristics. Meanwhile, unionized firms and non-unionized firms with grievance procedures employ higher proportion of irregular workers. The proportion of short-term and part-time workers increases only when they are entitled to join trade unions. These imply that the rise in the percentage of irregular workers due to unions and grievance procedures is attributed to the increase in the percentage of agent temporary and outsourced workers. Also, when short-term and part-time workers are allowed to join the union, the firm replaces agent temporary and outsourced workers with short-term and part-time workers, so that the proportion of irregular workers do not change.

• KDI Journal of Economic Policy
• /
• v.31 no.2
• /
• pp.15-45
• /
• 2009

This paper estimates the term structure of interest rates with the setup of 3-factor no arbitrage model and investigates the trend of term premia and the effectiveness of changes in policy interest rates. The term premia are found to be high in a three-year medium term objective, which can be interpreted as reflecting the recognition of investors who expect a higher uncertainty in real activities for the coming three years than for a longer term. Then, in order to look into the effect of policy interest rates after the recent change of benchmark interest rate, this paper analyzes the effects of the changes in short-term interest rates of the financial market on the yield curve of the bond market at time of change. Empirical results show that the discrepancy between call rate, short-term rate in money market, and instantaneous short rate, short-term rate in the bond market, is found to be significantly widened, comparing to the periods before the change in benchmark interest rate. It is not easy to conclude clearly for now whether such a widening gap is caused by the lack of experiences with managing new benchmark interest rate or is just an exceptional case due to the recent turmoil in the global financial market. However, monetary policy needs to be operated in a manner that could reduce the gap to enhance its effectiveness.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.2
• /
• pp.112-121
• /
• 1997

This study is focused on the development and selection of optimal cool tube system to maximize its thermal performance. Cool tube is devised to reduce the heating and cooling load of building by preheating or refreshing of intake air. Finite volume method was adopted to solve the conduction problem between the cool tube and earth. We examine the cool tube system for two operating periods, a short term(12 hours) and a long term(3 months). The results of short term operations reveal that condensation significantly influences and raises the exit air temperature. For long term operations, optimum conditions of cool tube system are obtained with variations of flow-rate, depth, length and diameter of cool tube.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.4
• /
• pp.517-526
• /
• 1997

This study is focused on the development and selection of the optimal cool tube system to maximize its thermal performance. Cool tube is devised to reduce the heating and cooling load of building by preheating or refreshing of intake air with buried pipes. Finite volume method is adopted to solve the conduction problem between the cool tube and earth. We examine the cool tube system for two operating periods, a short term(12 hours) and a long term(3 months). The results of short term operations reveal that condensation significantly influences and raises the exit air temperature. For long term operations, optimum conditions of cool tube system are obtained with variations of flow-rate, depth, length and diameter of cool tube.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.5
• /
• pp.41-52
• /
• 2019

The purpose of the work is to develop a simple solar irradiance prediction model using a deep learning method, the LSTM (long term short term memory). Other than existing prediction models, the proposed one uses only the cloudiness among the information forecasted from the national meterological forecast center. The future cloudiness is generally announced with four categories and for three-hour intervals. In this work, a daily irradiance pattern is used as an input vector to the LSTM together with that cloudiness information. The proposed model showed an error of 5% for learning and 30% for prediction. This level of error has lower influence on the load prediction in typical building cases.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.5
• /
• pp.545-554
• /
• 1999

We would like to develop a short-term model to predict the time-related concentration of ozone whose reaction mechanism is complex. The paper targets Seoul where an ozone alert system has recently been employed. In order to develop a short-term prediction model for ozone, we suggested the Ozone Peak Indicator(OPI), an equivalent of the potential daily maximum ozone concentration, with precursors being the only limiting factor, and we calculated the Ozone Peak Indicarot as OPI={$rac{(O_3)_{max}cdot(H_{eH})_{max}(Rad)_{max}$ to preclude the influence of mixing height and solar radiation on the daily maximum ozone concentration. The OPI on the day of the prediction is to be calcultated by using the relation between OPI and the initial value of precursors. The basic prediction formula for time-related ozone concentration was established as $O_3(1)={(OPI)cdot Rad(t-2)H_{eH}}$, using the OPI, solar radiation two hours before prediction and mixing height. We developed, along with the basic formula for predicting photochemical oxidants, "SEOM"(Seoul Empirical Oxidants Model), a Fortran program that helps predict solar radiation and mixing height needed in the prediction of ozone pollution. When this model was applied to Seoul and an analysis of the correlation between the observed and the predicted ozone concentrations was made through SEOM, there appeared a very high correlation, with a coefficient of 0.815. SEOM can be described as a short-term prediction model for ozone concentration in large cities that takes into account the initial values of precursors, and changes in solar radiation and mixing height. SEOM can reflect the local characteristics of a particular and region can yield relatively good prediction results by a simple data input process.t process.

• Journal of Digital Convergence
• /
• v.17 no.6
• /
• pp.355-363
• /
• 2019

This study is an analytical case study focusing on 'low-budget' mobile game development centered on both short-term development and small-scale collaboration. This study set up the assumption of four months as development period limited by three developers along with step by step productional documentation. In the previous study, we set up the responsibilities of the development personnels to analyze the effective process of the practical production. Furthermore, the study analyzed the usability verification of both advantages and disadvantages for conducting the quantitative survey with developer's feedbacks. The study is to provide the essential guideline for 'low-budget' development group with effective pipeline.

• Journal of Korea Port Economic Association
• /
• v.34 no.4
• /
• pp.39-52
• /
• 2018

The Seosan-Daesan Port is a representative trade port in Chungnam, and has the sixth largest total cargo throughput and the third largest oil cargo throughput in Korea. However, research on this port's development is lacking relative to that for Busan Port, Incheon Port, and Gwangyang Port, and no study exists that suggests the direction of the development strategy for Seosan-Daesan Port. This study discusses the future role of Seosan-Daesan Port in preparation for a rapidly changing future and the development strategy that should be established. Using the AHP, a development strategy is provided for Seosan-Daesan Port from short/mid-term and long-term viewpoints for three aspects: operation activation, infrastructure construction, and policy support. Operation activation is chosen as the most significant factor from a short/mid-term viewpoint, whereas infrastructure construction is recognized as important from a long-term viewpoint. Specifically, from a short/mid-term viewpoint, sustainable container cargo attraction, multipurpose dock construction, management pier construction, and opening of international passenger ferry lines are important factors while from the long-term viewpoint, hinterland construction, petrochemical industry cluster construction, automobile industry cluster construction, and management improvement system are important. Establishing action plans for each strategy and a cooperative network for sharing goals and strengthening cooperation is necessary.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.2
• /
• pp.44-55
• /
• 1994

This paper describes the development of real-time irrigation reservoir operation models that adequately allocate available water resources for paddy rice irrigation. Water requirement deficiency index(WRDI) was proposed as a guide to evaluate the operational performance of release schemes by comparing accumulated differences between daily release requirements for irrigated areas and actual release amounts. Seven reservoir release rules were developed, which are constant release rate method (CRR), mean storage curve method(MSC), frequency analysis method of reservoir storage rate(FAS), storage requirement curve method(SRC), constant optimal storage rate method (COS), ten-day optimal storage rate method(TOS), and release optimization method(ROM). Long-term forecasting reservoir operation model(LFROM) was formulated to find an optimal release scheme which minimizes WRDIs with long-term weather generation. Rainfall sequences, rainfall amount, and evaporation amount throughout the growing season were to be forecasted and the results used as an input for the model. And short-term forecasting reservoir operation model(SFROM) was developed to find an optimal release scheme which minimizes WRDIs with short-term weather forecasts. The model uses rainfall sequences forecasted by the weather service, and uses rainfall and evaporation amounts generated according to rainfall sequences.