• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.267-270
• /
• 2007

한국항공우주연구원은 호주 University of Queensland(UQ)와 2006년 10월 스크램제트 엔진 성능시험 계약을 체결하고, 2007년 6월 UQ의 T4 Free Piston shock tunnel에서 마하 7.6, 고도 31.2 km 조건에서 스크램제트 엔진의 지상 성능시험을 수행하였다. 본 논문에는 T4 충격파 터널의 구조 및 데이터 취득 기법에 대하여 정리하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권4호
• /
• pp.362-369
• /
• 2016

The shock-free inflow criterion applied in the development of two-dimensional cascade for turbomachinery design. The developed cascade analysis with potential flow calculation through a panel method has been used to determine the shock-free inflow condition. The combination between cascade analysis and PSO (particle swarm optimization) algorithm provides an opportunity to develop a diagram of a two-dimensional parameter cascade at various airfoil shapes. Analytical equations have been derived from the diagram that will facilitate the turbomachinery designer in applying the shock-free inflow criterion on their developed cascade. This method has been used to develop the very low head axial hydraulic turbine and provides excellent results of numerical and actual prototype performances.

• 대한기계학회논문집B
• /
• 제36권1호
• /
• pp.61-66
• /
• 2012

본 연구에서는 NACA0014 천음속 익형 유동에 있어서 비평형 응축이 Terminating shock 의 진동에 미치는 영향을 TVD 수치해석을 통하여 연구하였다. 주류 마하수 0.81-0.87 에 대해 정체점 상대습도가 유동 특성에 미치는 영향이 구명되었다. 받음각 ${\alpha}=0^{\circ}$ 정체점 온도(288K) 및 주류 마하수가 동일한 경우, 정체점 상대습도의 증가는 Terminating shock 의 충격파 강도를 약화시키고 충격파의 진동수도 감소시킨다. 정체점 상대습도가 동일한 경우는 주류 마하수가 클수록 충격파의 진동수는 증가한다. 정체점 상대습도가 동일한 경우, 충격파의 이동거리는 주류 마하수가 클수록 증가하는 것으로 나타났다. 특히, 충격파가 동일한 x/c 에 위치하는 경우, Terminating shock 의 충격파 강도는 충격파가 상류로 이동할 때가 하류로 이동할 때보다 강하게 된다.

• The Korean Journal of Ecology
• /
• 제14권1호
• /
• pp.75-85
• /
• 1991

Changes in the activities of isocitrate dehydrogenase (IDH) and glutamate dehydrogenase (GDH) and changes in free amino acids in the cytoplasm of Saccharomyces cerevisiae have been studied under heat shock condition. Heat shock conditions led to a significant decrease of NAD-IDH and NAD-GDH, It was shown appeared that the meaningful patterns of increase of NADP-IDH and NADP-GDH. It suggested that heat shock in yeast leads to a splitting of the TCA cycle and that glutamate synthesis takes place through the coupling of the NADP-linked isocirate and glutamate dehydrogenase. It was shown that about 14% of total free amino acids of yeast cells was decreased by heat shock. Especially heat shock condition resulted in the marked decreases of serine family amino acids such as serine, glycine and cysteine, and in the considerable increases of the rates of methionine, alanine, glutamin.

• 대한약리학회지
• /
• 제2권1호
• /
• pp.99-109
• /
• 1966

It has been known that the pronounced hypotension resulting from hemorrhage gives rise to compensatory stimulation of the adrenosympathetic system, which leads to an increase of liberation of catecholamines from sympathetic nervous system and adrenal medulla. It is obvious, therefore, that numerous physiological and biochemical changes during the hemorrhagic hypotention might be mediated through the increased liberation of catecholamines. Although an extensive studies have been reported on changes of protein and carbohydrate metabolism in hemorrhagic shock a few studies on the changes of lipid metabolism have been reported. Levenson(1961) observed a marked increase of serum lipids content during hemorrhagic shock and also noticed a marked elevation of serum free fatty acids. He suggested that these effects were due to mobilization and accelerated metabolic breakdown of lipids which might be resulted by sympathetic stimulation as a cause. To elucidate the mechanism of this, author studied the change of serum free fatty acids and blood sugar with relation to catecholamines during experimentally induced hemorrhagic shock in dog. Healthy male mongrel dogs weighing approximately 15kg were used. Under the general anesthesia with pentobarbital, rapid hemorrhage was produced from the femoral artery maintaining blood pressure level of 40 mmHg measured by the manometer connected with the opposite femoral artery throughout the experiment. Serum free fatty acids(FFA) and blood sugar were measured by the methods of Dole(1956) and Folin-wu,(1920) respectively. Tissue catecholamine was measured by Shore and Olin method(1958) using Aminco-Bowman spectrophotofluorometer.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.90-96
• /
• 2011

In this study, the characteristic of fractured portion and shape on solder joints were investigated according to the thermal shock test for Automotive Application Component using Sn-3.0Ag-0.5Cu solder, which has a outstanding property as Lead-free solder. The value of pull and shear strength was decreased in principle after 432 cycles thermal shock test. In addition, fracture mode was verified by using EDS and SEM to observe fractured shape on the solder joints before and after thermal shock. In before thermal shock test, the fracture mode revealed typically solder layer's fracture mode. In after thermal shock test, we identified multiple fracture mode of the ductile and brittle fracture. Even though same composition of solder was used to experimental for estimating. the fracture mode varied on the fracture portion's height and the directional angles of shear strength. In conclusion, we identified that mechanical strength was affected on the solder layer's fracture mode.

• 대한조선학회논문집
• /
• 제40권6호
• /
• pp.1-11
• /
• 2003

For an accurate shock response analysis of a floating structure such as a naval surface ship subjected to an UNDEX(UNDerwater Explosion), the cavitation effects due to reflected wave at free surface and wetted structural surface should be considered. In this study, for the consideration of cavitation effects an effective method using LS-DYNA/USA and its theoretical background were presented. Through the application of the analysis of bulk cavitation phenomena in the free field, it could be confirmed that almost the same results were obtained between LS-DYNA/USA code and the analytical method. for the investigation of cavitation effects from the structural shock response characteristics, three dimensional UNDEX shock response analysis of an idealized ship model was also carried out It could be found that the cavitation Phenomena gave significant effects on the structural shock response characteristics, and especially that the shock loadings calculated at the installed location of shipboard equipment were underestimated in the case of no consideration of the cavitation effects, which might cause the severe mistake in its shock-resistance design.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.78-81
• /
• 2008

A numerical study of the unsteady flow in an over-expanded thrust optimized contour and compressed truncated perfect rocket nozzle is carried out in present paper. These rocket nozzles are subject to flow separation in transient phase at engine start-up and/or engine shut-down. The separation flow structures at different pressure ratios are observed. The start-up process exhibits two different shock structures such as FSS (Free Shock Separation) and RSS (Restricted Shock Separation). For a range of pressure ratios, hysteresis phenomenon occurs between these two separation patterns. A three-dimension compressible Navier-Stokes solver is used for the present study. One equation Spalart-Allmaras turbulence model is selected. The computed nozzle wall pressures show a good agreement with the experimental measurements. Present results have shown that present code can be used for the analysis of the transient flows in nozzle.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.134-139
• /
• 2007

This paper presents a computer-based analysis on the thermal shock characteristics of Pb-free solder joints and UBM in flip chip assemblies. Among four types of popular UBM systems, TiW/Cu system with 95.5Sn-3.9Ag-0.6Cu solder joints was chosen for simulation. A simple 3D finite element model was first created only including silicon die, mixture between underfill and solder joints, and substrate. The displacements due to CTE mismatch between silicon die and substrate was then obtained through FE analysis. Finally, the obtained displacements were applied as mechanical loads to the whole 2D FE model and the characteristics of flip chip assemblies were analyzed. In addition, based on the hyperbolic sine law, the accumulated creep strain of Pb-free solder joints was calculated to predict the fatigue life of flip chip assemblies under thermal shock environments. The proposed method for fatigue life prediction will be evaluated through the cross check of the test results in the future work.

• Journal of Welding and Joining
• /
• 제24권6호
• /
• pp.21-27
• /
• 2006

This study was focused on the evaluation of the thermo-mechanical board-level reliability of Pb-bearing and Pb-free surface mount assemblies. The composition of Pb-bearing solder was a typical Sn-37Pb and that of Pb-free solder used in this study was a representative Sn-3.0Ag-0.5Cu in mass %. Thermal shock test was chosen for the reliability evaluation of the solder joints. Typical $Cu_6Sn_5$ intermetallic compound (IMC) layer was formed between both solders and Cu lead frame at the as-reflowed state, while a layer of $Cu_3Sn$ was additionally formed between the $Cu_6Sn_5$ and Cu lead frame during the thermal shock testing. Thickness of the IMC layers increased with increasing thermal shock cycles, and this is very similar result with that of isothermal aging study of solder joints. Shear test of the multi layer ceramic capacitor(MLCC) joints was also performed to investigate the degradation of mechanical bonding strength of solder joints during the thermal shock testing. Failure mode of the joints after shear testing revealed that the degradation was mainly due to the excessive growth of the IMC layers during the thermal shock testing.